SPECIFICATIONS.pdf

Light weight Industrial Stick/TIG welding machine

Document # 3073-3340

Must meet the following specifications:

Must be able to weld on material type: Mild Steel, Stainless Steel

Must be able to weld maximum material thickness3/8 in (Aluminum), 3/8 in

(Mild Steel)

Must be able to weld minimum material thickness0.004 in (Mild Steel),

0.012 in

(Aluminum)

Input Frequency50/60 Hz

Max. Input Current200A at 230 - 460 VAC 1ph, 300A at 230 - 460 VAC 3ph

Must run on single-phase at 5-200 Amps and three-phase at 5-300 Amps

Polarity DC

Stick Welding Maximum Output Current 300 A

Stick Welding Minimum Output Current 5 A

Stick Welding Output @ Duty Cycle 200 A @ 28 V, 100%, 250 A @ 30 V, 60%, 300

A @ 32 V, 40%

TIG Welding Maximum Output Current 300 A

TIG Welding Minimum Output Current 5 A

TIG Welding Output @ Duty Cycle 200 A @ 18 V, 100%, 250 A @ 20 V, 60%, A @ 22 V, 40%

Welding Processes Stick Welding (SMAW), TIG Welding (GTAW)

Must have Amperage Range 5 A to 300 A

Must have Digital Readout Display, Integrated Latch System, Intuitive

Interface, Rugged Case, Small, Three Handle Design

Must include power supply, 10-ft. input cable, and two OKC 50 connectors

Input Voltage208V AC, 460V AC

Must have the following dimensions: Overall Depth 18.5 inches, Overall

Height 12.61 inches, Overall Width 7.91 inches

Plug Type: Bare Leads

Must meet Nationally Recognized Testing Laboratory standards (CSA)

Must weigh 33 pounds or less (for mobility standards)

Must have welding Mode: CC

Rated Output - STICK

40% Duty Cycle 3ph at 300 A / 30 V

60% Duty Cycle 3ph at 250 A / 30 V

100% Duty Cycle 1ph/3ph at 200 A / 28 V

Rated Output –

40% Duty Cycle at 300 A / 20 V

60% Duty Cycle at 250 A / 20 V

100% Duty Cycle 1ph/3ph at 200 A / 18 V

Low open circuit voltage option must be enabled (VRD)