Specifications.pdf

STATEMENT OF WORK/SPECIFICATIONS

FCI THOMSON – B&F PROJECT 26Z4AP4

Interior Finishes

I. SPECIFICATIONS:

A. INTRODUCTION

The Federal Bureau of Prisons (FBOP), FCI Thomson located at 1100 One Mile Road in Thomson, Illinois intends to make a single award to a responsible entity that will provide the following listed below.

B. Provide the following

• (115 Gallons) of Sherwin Williams Macropoxy Part A - b58w610 or equivalent (Color = White)

• (115 Gallons) of Sherwin Williams Macropoxy Part B - b58v600 or equivalent

• (110 Gallons) of Sherwin Williams Pro Industrial Acrylic HP Semi-Gloss Extra or Equivalent (Color =Min White)

• (55 Gallons) of Sherwin Williams Pro Industrial Acrylic HP Semi-Gloss Extra or Equivalent (Color =Match Gray to be determined by FCI Thomson)

• (30 Gallons) of Sherwin Williams Pro Block Primer or Equivalent (Color = White)

• (10 Gallons) of Kilz Mold & Mildew or Equivalent (Color = White)

• (8 Gallons) of Sherwin Williams Industrial Enamel HS Alkyd or Equivalent (Color = Safety Yellow)

• (20 Gallons) of Sherwin Williams Industrial Enamel HS Alkyd or Equivalent (Color = Pure White)

• (16 Gallons) of Sherwin Williams Industrial Enamel HS Alkyd or Equivalent (Color = Match Gray to be determined by

FCI Thomson)

C. QUALITY ASSURANCE

All seismic zone requirements, environmental compliance, Life Safety, NFPA, ADA-ABA, and Federal, State and Local codes and regulations.

Materials provided by the contractor will adhere to and shall be consistent with the most current industry standards, the Underwriters Laboratories (UL).

D. SUBMITTAL

The vendor shall provide all required documents to include specifications, warranty sheets and operating manuals (OM).

The Vendor shall provide the Contracting Officer, or COR, (3) copies of the Material Safety Data Sheets (MSDS) on all materials and substances that may be used during the project. In the event the Safety Manager does not approve the material, it shall be the responsibility of the Vendor to locate and procure an alternative product.

D. Delivery of Materials:

All construction materials/equipment required for work on this project is required to be processed by the Contractor and coordinated with the institution COR for temporary storage.

Any construction-related deliveries which are directly shipped to the contractor can be received between the hours of 7:30 a.m. to 2:30 p.m., Monday through Friday, excluding Federal Holidays. At no point will a Bureau of Prisons (BOP) staff member receive or sign for a delivery if the contractor or his representative is not present to verify and accept the delivery.

Under no circumstances will FCI Thomson or its staff be responsible for the acceptance of any Contractor or company deliveries. The contractor shall be responsible for providing their own means of loading and unloading contractor material or equipment.

The contractor shall not use the institution entry/driveway for the loading, unloading, or storage of any materials and equipment. The contractor will not impede/block the driveway at any time during or after the work shift.

bop00351 Approved