Special Packaging Instructions_SPI-F01-373-6626.pdf
PDF 497 KB Posted
- Attached to
- Fixture Assembly
- Solicitation number
- SPRHA4-26-R-0454
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is a Special Packaging Instruction (SPI) document for a Fixture Assembly, Test, Interface Device, issued by the Department of Defense.
The document specifies comprehensive packaging and preservation requirements for the fixture assembly using Military Preservation IAW MIL-STD-2073 with serviceable and unserviceable methods designated as GX. Two packaging levels are defined: Level A (ASTM D6251, Style A, Class III, Grade 2) and Level B (ASTM D5118, RSC, Class V3c). Level A accommodates 6.214 cubic feet and 96 pounds gross weight with dimensions of 27 3/4" L x 16 3/4" W x 17 1/4" D (center I.D.) and 29 3/4" L x 18 3/4" W x 19 1/4" D (center O.D.). Level B reduces to 4.410 cubic feet and 31 pounds, measuring 27" L x 16" W x 16 1/4" D (center I.D.) and 27 3/8" L x 16 3/8" W x 17" D (center O.D.). The item weighs 25 pounds. Closure requirements mandate ASTM D6251 for Level A and ASTM D1974 for Level B. Marking requirements include the SPI number F01-373-6626 on the identification side of containers, with reusable containers and dunnage marked for non-destruction, and ESD labels applied as specified. The document includes detailed component specifications for packaging materials, including A/R tape, wrap, blocks, pads, interior containers, barrier bags, cushioning materials conforming to MIL-PRF-81705 and MIL-PRF-26514 specifications. Additionally, the document contains International Standards for Phytosanitary Measures (ISPM No. 15) compliance requirements mandating that all wood packaging materials be constructed from debarked, heat-treated wood (HT to 56°C/133°F for 30 minutes) with certification from an accredited agency recognized by the American Lumber Standards Committee (ALSC). Assembly instructions with detailed diagrams illustrate proper lamination, positioning, and application procedures for packaging components.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426R0454 CUI SSI.pdf | ||
| Counterfeit Prevention Plan.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 09 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
CAUTION NOTICES
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. LAMINATE REF.-7 & -8 TO REF.-6 USING AN ADHESIVE CONFORMING TO A-A-59692 TYPE II.
File details come from the government source that posted it. Updated .