Att 1 PID Packaging and Marking.pdf

73 KB Posted

Attached to
NSN - 5935-01-370-4770 (Connector, Receptacl, Compressor)
Solicitation number
SPE7MX26R0064
Issued by

About this file

Written by GovTribe AI ·

This is a Product Information Description (PID), Packaging and Marking attachment for federal contract solicitation SPE7MX-26-R-0064. The document specifies requirements for a single line item: Connector, Receptacle, Electrical (NSN 5935-01-370-4770), designated as a Critical Application Item. Three approved suppliers are identified: DCX-CHOL Enterprises, Inc. (P/N 153128), Meggitt North Hollywood Inc. (P/N 153128), and Hermetic Seal Corporation (P/N SX3347).

The document establishes packaging and delivery requirements for DLA Direct procurement in the Continental United States (CONUS). Packaging must comply with either MIL-DTL-55330 for connectors or commercial standards per ASTM D3951, depending on hazard classification under FED-STD-313. Hazardous materials must be packaged per requirement IP025; non-hazardous materials per ASTM D3951. All packaging and marking shall follow MIL-STD-129, with unit of issue and quantity per unit pack determined by the specific purchase order. Palletization requirements are governed by RP001 (DLA Packaging Requirements for Procurement). The document references five technical and quality requirements (RP001, RA001, RQ011, RQ017, E0115, and J5935) with full text available on the DLA Master List of Technical and Quality Requirements website. For alternate offerors, requirement E0115 mandates submission of a complete data package for both approved and alternate parts for evaluation.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPE7MX-26-R-0064

Attachment 1 – Product Information Description (PID), Packaging and Marking

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 5935-01-370-4770

CONNECTOR,RECEPTACLE,ELECTRICAL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:E0115

CRITICAL APPLICATION ITEM

DCX-CHOL ENTERPRISES, INC 27456 P/N 153128

MEGGITT NORTH HOLLYWOOD INC 79318 P/N 153128

HERMETIC SEAL CORPORATION 04820 P/N SX3347

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS

DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY

REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ017

RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER E0115

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

REFERENCE NUMBER J5935

PRESERVATION AND PACKAGING SHALL BE IAW THE

LATEST REVISION OF MILITARY SPECIFICATION:

MIL-DTL-55330, FOR CONNECTORS.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

File details come from the government source that posted it. Updated .