Att_1_PID_PACK_TEXT5371.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR THE NSN.

NSN:5998-01-539-5371

CIRCUIT CARD ASSEMB

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS240

REFERENCE NUMBER:CA060

HARRIS CORPORATION DBA HARRIS RF 14304 P/N A3307046-1

PREP FOR DELIVERY

LINE ITEM 0001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:A

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZDESD

REFERENCE NUMBER:ZD028

ZZ -ADDITIONAL SPECIAL MARKING:

EXPORT CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED

PER MIL-STD-129, PARAGRAPH 5.4.1.6 (Protected Cargo): The item description (nomenclature) shall be omitted from the MIL-STD-129 label for all shipping containers.

40 - omission of marking for sensitive, controlled or pilferable items per MIL-STD-129.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW- ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER ZDESD

ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.

This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.

For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.

For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.

The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.

For additional ESD/EMI packaging information, refer to the following DLA packaging website:

http://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logi stics/Packaging/PackFAQs/ESDS.aspx If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror#s proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.

REFERENCE NUMBER ZD028

ZZ - ADDITIONAL SPECIAL MARKING: 39 - ESD sensitive electronic device requirements of MIL-STD-129 apply

REFERENCE NUMBER CS240

NOTE: THIS IS A RESTRICTED SOURCE ITEM

MANUFACTURED TO THE OEM DRAWING(S) CITED

HEREIN AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN

PREQUALIFIED TO MANUFACTURE THE ITEM.

OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S

PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND

OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR

THE INTENDED APPLICATION AS PER DLAI 3200.1,

ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED

PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE

TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY

REST WITH THE GOVERNMENT DESIGN CONTROL

ACTIVITY.

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.