PID_(Gun_Kits).docx

LTC PID Packaging Consolidated Text – SPE7LX-18-R-0133

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 1005014660412

PARTS KIT, SEAL:

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS001

REFERENCE NUMBER:CS147

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ES371

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THIS SOLICITATION. ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A SOURCE APPROVAL REQUEST [SAR] PACKAGE TO DLA.

BRIGHTON CROMWELL LLC 3NNX8 P/N 8305862

SEY TEC, INC. 0FGC4 P/N 8305862

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 8305862 Balance Enterprise Solutions LLC 8A2B1 P/N 8305862

IAW REFERENCE DRAWING NR 53711 8305853

REVISION NR B DTD 07/24/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 8305862

REVISION NR DTD 02/16/2011

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

REFERENCE NUMBER:ZD079

NSN: 1005014660419

PARTS KIT, GUN. (CIWS Drum Drive, Exit & Entrance).

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THIS SOLICITATION. ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A SOURCE APPROVAL REQUEST [SAR] PACKAGE TO DLA.

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CA060

BRIGHTON CROMWELL LLC 3NNX8 P/N 53711-8305861

SEY TEC, INC. 0FGC4 P/N 53711-8305861

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 53711-8305861 Balance Enterprise Solutions LLC 8A2B1 P/N 8305861

IAW REFERENCE DRAWING NR 53711 8305853

REVISION NR B DTD 07/24/2013

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:IP064

NSN: 1005014660423

PARTS KIT, GUN. (EXIT UNIT).

REFERENCE NUMBER:RA001

*ENGINEERING NOTE: AT THIS TIME THE ONLY APPROVED LAST ROUND SWITCH ASSEMBLY FOR THIS KIT IS NAVY P/N 5191344 PURCHASED FROM CAGE 1Y5C0, Coast to Coast Aerospace and CAGE 3B8L1, Janels Industries.*

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THIS SOLICITATION. ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A SOURCE APPROVAL REQUEST [SAR] PACKAGE TO DLA.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS147

REFERENCE NUMBER:IS026

BRIGHTON CROMWELL LLC 3NNX8 P/N 53711-8305863

SEY TEC, INC. 0FGC4 P/N 53711-8305863

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 53711-8305863 Balance Enterprise Solutions LLC 8A2B1 P/N 53711-8305863

IAW REFERENCE DRAWING NR 53711 8305853

REVISION NR B DTD 07/24/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 8305863

REVISION NR DTD 01/20/2011

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

NSN: 1005014660424

PARTS KIT, GUN. (CIWS GUN KIT).

REFERENCE NUMBER:RA001

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THIS SOLICITATION. ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A SOURCE APPROVAL REQUEST [SAR] PACKAGE TO DLA.

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CA060

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

BRIGHTON CROMWELL LLC 3NNX8 P/N 53711-8305865

SEY TEC, INC. 0FGC4 P/N 53711-8305865

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 53711-8305865 Balance Enterprise Solutions LLC 8A2B1 P/N 53711-8305865

PREP FOR DELIVERY

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

NSN: 1005014660425

PARTS KIT, SEAL REPLACEMENT.

REFERENCE NUMBER:RA001

THE ONLY APPROVED SOURCES FOR THIS ITEM ARE LISTED ON THIS SOLICITATION. ANY OTHER SOURCE WANTING TO BECOME A QUALIFIED SOURCE MUST SUBMIT A SOURCE APPROVAL REQUEST [SAR] PACKAGE TO DLA.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS001

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:ZD025

BRIGHTON CROMWELL LLC 3NNX8 P/N 8305866

SEY TEC, INC. 0FGC4 P/N 8305866

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 8305866 Balance Enterprise Solutions LLC 8A2B1 P/N 8305866

IAW REFERENCE DRAWING NR 05606 116C3871

REVISION NR AA DTD 05/21/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 05606 125C3781

REVISION NR AE DTD 05/12/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5544240

REVISION NR A DTD 03/02/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5544239

REVISION NR B DTD 12/31/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5544163

REVISION NR C DTD 07/12/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 8305853

REVISION NR B DTD 07/24/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 135B5372

REVISION NR AU DTD 02/09/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5191338

REVISION NR C DTD 08/19/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 8305866

REVISION NR DTD 01/20/2011

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

REFERENCE NUMBER:IP064

NSN: 1005014660427

PARTS KIT, SEAL.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CA061

REFERENCE NUMBER:IS026

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:ZD025

BRIGHTON CROMWELL LLC 3NNX8 P/N 8305868

SEY TEC, INC. 0FGC4 P/N 8305868

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 8305868 Balance Enterprise Solutions LLC 8A2B1 P/N 8305868

PREP FOR DELIVERY

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES (CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER IKT02

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL APPLICABLE QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS FOR THE KIT COMPONENTS BEING SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR OBTAINING, HANDLING AND SUPPLYING ORIGINAL EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR PROCESS THAT WILL ENSURE TRACEABILITY OF ALL PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS THAT ARE KNOWN TO BE ACCEPTABLE TO THE GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS REFLECTED IN THE GOVERNMENT'S CONTRACT TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY ONLY NEW AND UNUSED PARTS THAT ARE NOT GOVERNMENT SURPLUS PARTS.

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25.

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING."

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items). Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER IP064

PACKAGING AND MARKING REQUIREMENTS FOR KITS

PRESERVATION METHOD CODE ZZ-PACKAGING, CODE Z-PACKING AND MARKING SHALL BE AS FOLLOWS FOR KITS:

QUANTITIES OF THE SAME PART WITHIN A KIT SHALL BE PACKAGED AND LABELED. EACH LABEL ON THE ABOVE PACKAGED ITEMS SHALL CONTAIN THE FOLLOWING INFORMATION: DESCRIPTION, CAGE AND PART NUMBER, QUANTITY, AND MONTH/YEAR PACKAGED. MARK SHELF-LIFE ITEMS IAW SAE ARP5316 OR MIL-HDBK-695.

PLACE CONTENTS OF KIT IN ONE (1) BOX – BOX MUST BE SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT (MULTI-BOX IF NECESSARY). LISTING OF KIT CONTENTS INSIDE BOX (KIT P/N, NSN, DESCRIPTION, REVISION LEVEL, AND DATE + EACH INDIVIDUAL PART NUMBER, NSN (IF ASSIGNED ONE), CAGE, DESCRIPTION, AND QUANTITY). CUSHIONING OF MATERIAL AS NECESSARY TO PREVENT DAMAGE TO CONTENTS. BOX SHALL BE LABELED. BARCODED WITH THE FOLLOWING INFORMATION: KIT NSN, KIT P/N, CONTRACT NUMBER, MONTH/YEAR PACKAGED, AND CURE DATE OF ITEM WITH THE LEAST SHELF LIFE REMAINING (IF APPLICABLE) (E.G. 2Q/99=2ND QUARTER 1999).

THE ABOVE MARKING SHALL BE USED ILO THE MARKING SPECIFIED IN MIL-STD-129.

REFERENCE NUMBER IS026

NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM

REFERENCE NUMBER CA061

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION.