SYnopsis_Att_1_PID_Packaging_Consolidated_Text.docx

64 KB Posted

Attached to
Housing Assy, Hub and Arm Assy.
Solicitation number
SPE7LX17R0029
Issued by

About this file

From the source

PID PACK text

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPE7LX17R0029

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001 - NSN: 2510009984713

HOUSING AND BUSHING ASSEMBLY.

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER: ZD064

ZD064-The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER: CS147

CS147-"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER: CQ023

CQ023-PROCESS PROCEDURES AND OR WORKMANSHIP

SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S)

APPLICABLE TO THIS CONTRACT WILL BE APPROVED

BY THE ACTIVITY RESPONSIBLE FOR THE

ADMINISTRATION OF THE CONTRACT. POSTAWARD

PREPRODUCTION APPROVAL VERIFYING THE

REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED.

REFERENCE NUMBER: CA070

CA070-FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER: CQ015

CQ015-"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

REFERENCE NUMBER: CSS01

CSS01-SPECIFICATION

IAW BASIC DRAWING NR 19207 10862993

REVISION NR E DTD 10/31/1997

PART PIECE NUMBER: 10862990

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862994

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER: 10862991

IAW REFERENCE DRAWING NR 19207 7364322

REVISION NR F DTD 08/06/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364324

REVISION NR C DTD 07/22/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862995

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER: 10862992

IAW REFERENCE DRAWING NR 19207 10862996

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER: 10862996-1

IAW REFERENCE DRAWING NR 19207 10867488

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8346388

REVISION NR G DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8364472

REVISION NR D DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862990

REVISION NR DTD 08/13/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 21450 CARX4.1

REVISION NR 5 DTD 03/31/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364312

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364313

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364314

REVISION NR E DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364315

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364316

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364321

REVISION NR F DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR A DTD 04/30/2003

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-16279

REVISION NR DTD 10/05/2016

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:X

UNIT CONT:ED OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER: ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

CLIN 0002 - NSN: 2510009984718

HOUSING ASSY, CAB DO (HOUSING AND BUSHING ASSY)

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

WEAPON SUPPORT SYSTEM:28A VEHICLE, RECOVERY M-88 SERIES

REFERENCE NUMBER: CA070

CA070-FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER: ZD087

ZD087-THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER: CS147

CS147-"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER: ZD004

ZD004-A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER: CQA01

CQA01- QUALITY ASSURANCE PROVISION

REFERENCE NUMBER: ZD025

ZD025-MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER: A0003

A0003-MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

IAW BASIC DRAWING NR 19204 CARX4.1

REVISION NR 5 DTD 03/31/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862993

REVISION NR E DTD 10/31/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862993

REVISION NR E DTD 02/09/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862994

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364322

REVISION NR F DTD 08/06/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364324

REVISION NR C DTD 07/22/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862993

REVISION NR DTD 05/22/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862995

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862996

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862997

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862998

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10862999

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10867488

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364312

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364313

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364314

REVISION NR E DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364315

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364316

REVISION NR C DTD 11/06/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364321

REVISION NR F DTD 11/06/1998

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK09984716, REVISION E, DATED 2-9-1999

CLIN 0003 - NSN: 2530007364134

HUB, DRIVE

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER: ZD003

ZD003-A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

USE OF COORDINATE MEASURING EQUIPMENT

CALIBRATED TO NIST STANDARDS MAY BE

USED FOR INSPECTION PURPOSE UPON

APPLICATION TO DSCC QUALITY ASSURANCE

SPECIALIST OR DSCC ENGINEER IN LIEU OF

INSPECTION GAGING AS DETAILED IN

QAP 19207 7364134.

FIRST ARTICLE TEST AND CERTIFICATION

REQUIREMENTS ARE REQUIRED IN ACCORDANCE

WITH QUALITY ASSURANCE PROVISION NUMBER

7364134, PART II, TABLE II, PARAGRAPH 2.

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER: CQA01

CQA01- QUALITY ASSURANCE PROVISION

REFERENCE NUMBER: CS001

CS001-THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 7364134

REVISION NR AM DTD 02/03/1989

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 7364134

REVISION NR T DTD 02/28/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7956573

REVISION NR K DTD 12/02/1976

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7992478

REVISION NR C DTD 08/21/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 11631808

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364134

REVISION NR DTD 08/09/2012

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:CA CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:F6 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

02 - ARROW UP

13 - OPEN THIS SIDE

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129<(>,<)>

SERIAL NUMBER SHALL BE MARKED ON THE UNIT<(>,<)>

INTERMEDIATE, AND SHIPPING CONTAINERS.

REFERENCE NUMBER:IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

CLIN 0004 - NSN: 2530008325258

ARM ASSEMBLY, PIVOT, TRACK SUSPENSION.

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER: ZD003

ZD003-A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

CAST STEEL ARMOR.

EXCEPTION TO DRAWING 8676189 SHEET 3:

THE 8.38 INCH DIMENSION IN SECTION E-E

SHALL HAVE A TOLERANCE OF +/- 0.06.

REFERENCE NUMBER: CS001

CS001-THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

FAT REQUIRED FOR COMPLIANCE TO DRAWING 8676189, REV K.

REFERENCE NUMBER: CQ026

CQ026-"ANY ITEM PREVIOUSLY TESTED BY A VENDOR

IN ACCORDANCE WITH *** QUALIFICATION***

REQUIREMENTS (FOR EXAMPLE: FAT, HIGH

SHOCK AND/OR VIBRATION TEST), STATED ON

DWG, SPECIFICATION, OR STANDARD MAY NOT

REQUIRE FURTHER TESTING BY THE SAME VENDOR

EXCEPT FOR A LATER CHANGE IN DESIGN,

MANUFACTURING PROCEDURES, OR TESTING

REQUIREMENTS. A CERTIFICATION OF

CONFORMANCE WITH PREVIOUS TEST RESULTS

ATTESTING APPLICABILITY SHALL BE

SUBMITTED FOR ITEMS PREVIOUSLY TESTED."

REFERENCE NUMBER: CQ042

CQ042-THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION

WITH A FIRST ARTICLE TEST REQUIREMENT. THE

GOVERNMENT SOURCE INSPECTION REQUIREMENT IS

VALID WHETHER OR NOT THE FIRST ARTICLE TEST

REQUIREMENT IS INVOKED.

REFERENCE NUMBER: CA070

CA070-FULL AND OPEN COMPETITION APPLY

IAW BASIC DRAWING NR 19207 8676190

REVISION NR G DTD 10/28/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8676190

REVISION NR F DTD 01/30/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8364404

REVISION NR F DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8676189

REVISION NR L DTD 11/06/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8676210

REVISION NR C DTD 11/06/2010

PART PIECE NUMBER: RADIOGRAPHIC POSITION CHART

IAW REFERENCE DRAWING NR 19207 8676190

REVISION NR DTD 08/09/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

PRESERVATION, PACKAGING, AND PACKING SAHLL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTIONS

(SPI) AK08325258, REVISION F, DATED 1-30-2003.

REFERENCE NUMBER:ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

02 - ARROW UP

13 - OPEN THIS SIDE

REFERENCE NUMBER:IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

CLIN 0005 - NSN: 2530014116238

HUB AND ARM ASSEMBLY.

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER: ZD087

ZD087-THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER: CA070

CA070-FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12364360

REVISION NR A DTD 05/08/2009

PART PIECE NUMBER: 12364360-1

IAW REFERENCE DRAWING NR 19207 12446799

REVISION NR A DTD 12/12/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8686447

REVISION NR H DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380881

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295385

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7974760

REVISION NR N DTD 07/03/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12366188

REVISION NR DTD 08/11/1995

PART PIECE NUMBER: P/N 12366188-1

IAW REFERENCE DRAWING NR 19207 11619600

REVISION NR B DTD 02/28/2001

PART PIECE NUMBER: P/N 11619600-3

IAW REFERENCE DRAWING NR 19207 12271032

REVISION NR A DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364353

REVISION NR A DTD 10/24/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364357

REVISION NR A DTD 02/04/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364359

REVISION NR DTD 08/04/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364377

REVISION NR DTD 08/10/1995

PART PIECE NUMBER: P/N 12364377-1

IAW REFERENCE DRAWING NR 19207 12364378

REVISION NR DTD 08/10/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364689

REVISION NR DTD 08/02/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12448122

REVISION NR DTD 11/21/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364358

REVISION NR A DTD 02/04/1999

PART PIECE NUMBER: P/N 12364358-1

IAW REFERENCE DRAWING NR 19207 5146158

REVISION NR F DTD 09/19/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146159

REVISION NR F DTD 09/30/1997

PART PIECE NUMBER: P/N 7521166 OPTIONAL

IAW REFERENCE DRAWING NR 19207 5380812

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12365956

REVISION NR A DTD 10/21/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8387092

REVISION NR E DTD 07/12/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8387093

REVISION NR D DTD 07/13/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8671020

REVISION NR AA DTD 11/06/1998

PART PIECE NUMBER: P/N 8671020

IAW REFERENCE DRAWING NR 19207 6295383

REVISION NR D DTD 07/10/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146157

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369001

REVISION NR D DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5602451

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12448121

REVISION NR A DTD 10/30/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364254

REVISION NR L DTD 10/31/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295380

REVISION NR K DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7720553

REVISION NR R DTD 09/23/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7379067

REVISION NR C DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380856

REVISION NR C DTD 06/17/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295381

REVISION NR A DTD 07/10/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364379

REVISION NR DTD 08/10/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364360-1

REVISION NR DTD 01/17/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12478495

REVISION NR DTD 05/08/2009

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:50 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GC CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:F7 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

02 - ARROW UP

03 - METHOD 50

17 - REUSABLE CONTAINER

13 - OPEN THIS SIDE

24 - OPEN FOR INSPECTION OR USE

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129<(>,<)>

SERIAL NUMBER SHALL BE MARKED ON THE UNIT<(>,<)>

INTERMEDIATE, AND SHIPPING CONTAINERS.

REFERENCE NUMBER:IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

CLIN 0006 - NSN: 2530014117533

BRACKET AND WHEEL ASSEMBLY (SPINDLE, WHEEL,

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

DRIVING-NONDRIVING)

REFERENCE NUMBER: ZD087

ZD087-THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER: ZD080

ZD080-SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

EXCEPTION TO DRAWINGS: USE WELDING DRAWING

12479550 IN LIEU OF MIL-STD-1261C.

REFERENCE NUMBER: CQ015

CQ015-"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER: CQ023

CQ023-PROCESS PROCEDURES AND OR WORKMANSHIP

SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S)

APPLICABLE TO THIS CONTRACT WILL BE APPROVED

BY THE ACTIVITY RESPONSIBLE FOR THE

ADMINISTRATION OF THE CONTRACT. POSTAWARD

PREPRODUCTION APPROVAL VERIFYING THE

REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED.

IAW BASIC DRAWING NR 19207 8706069

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146162

REVISION NR D DTD 08/29/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7014000

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7014040

REVISION NR E DTD 10/31/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7014041

REVISION NR D DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7014056

REVISION NR E DTD 10/24/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7058223

REVISION NR E DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7014042

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8706209

REVISION NR F DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8706068

REVISION NR D DTD 10/31/1997

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 7014040

REVISION NR D DTD 07/23/1975

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 7058223

REVISION NR F DTD 06/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 5146183

REVISION NR A DTD 12/06/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7713299

REVISION NR C DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8706067

REVISION NR R DTD 08/31/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146158

REVISION NR F DTD 09/19/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146159

REVISION NR F DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380812

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7760336

REVISION NR B DTD 09/30/1997

PART PIECE NUMBER: REV DATE REFERENCE ONLY

IAW REFERENCE DRAWING NR 19207 7521166

REVISION NR A DTD 07/02/1952

PART PIECE NUMBER: REFERENCE

IAW REFERENCE DRAWING NR 21450 CASX4

REVISION NR 9 DTD 02/06/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 21450 CASX4.1

REVISION NR 10 DTD 02/06/1961

PART PIECE NUMBER: 706905

IAW REFERENCE DRAWING NR 21450 CASX5

REVISION NR 8 DTD 02/06/1961

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146157

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 21450 CASX5.1

REVISION NR 12 DTD 02/06/1961

PART PIECE NUMBER: 706771

IAW REFERENCE DRAWING NR 19207 6295364

REVISION NR D DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380854

REVISION NR D DTD 03/20/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7713298

REVISION NR B DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR A DTD 04/30/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8706069

REVISION NR DTD 03/07/2014

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:50 CLNG/DRY:1 PRESV MAT:89

WRAP MAT:GC CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:F7 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

02 - ARROW UP

03 - METHOD 50

13 - OPEN THIS SIDE

17 - REUSABLE CONTAINER

24 - OPEN FOR INSPECTION OR USE

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129,

SERIAL NUMBER SHALL BE MARKED ON THE UNIT,

INTERMEDIATE AND SHIPPING CONTAINERS.

REFERENCE NUMBER: IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

CLIN 0007 - NSN: 2530014125185

HUB AND ARM ASSEMBLY.

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER: RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER: RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER: RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER: RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER: RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER: ZD087

ZD087-THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER: CS187

CS187-CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER: CQ015

CQ015- "FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12364360

REVISION NR A DTD 05/08/2009

PART PIECE NUMBER: P/N 12364360-2

IAW REFERENCE DRAWING NR 19207 12364344

REVISION NR DTD 04/03/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12446799

REVISION NR A DTD 12/12/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8686447

REVISION NR H DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380881

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295385

REVISION NR C DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19204 5146183

REVISION NR A DTD 12/06/1962

PART PIECE NUMBER:

IAW REFERENCE QAP 19204 5146183

REVISION NR A DTD 05/20/1965

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7974760

REVISION NR N DTD 07/03/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12366188

REVISION NR DTD 08/11/1995

PART PIECE NUMBER: P/N 12366188-2

IAW REFERENCE DRAWING NR 19207 11619600

REVISION NR B DTD 02/28/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12271032

REVISION NR A DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364353

REVISION NR A DTD 10/24/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364357

REVISION NR A DTD 02/04/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364359

REVISION NR DTD 08/04/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364377

REVISION NR DTD 08/10/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364378

REVISION NR DTD 08/10/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364689

REVISION NR DTD 08/02/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12448122

REVISION NR DTD 11/21/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364358

REVISION NR A DTD 02/04/1999

PART PIECE NUMBER: P/N 12364358-2

IAW REFERENCE DRAWING NR 19207 5146158

REVISION NR F DTD 09/19/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146159

REVISION NR F DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380812

REVISION NR G DTD 09/30/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12365956

REVISION NR A DTD 10/21/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7521166

REVISION NR A DTD 07/02/1952

PART PIECE NUMBER: P/N 7521166 OPTIONAL

IAW REFERENCE QAP 19207 7521166

REVISION NR D DTD 12/22/1972

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8387092

REVISION NR E DTD 07/12/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8387093

REVISION NR D DTD 07/13/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 8671020

REVISION NR AA DTD 11/06/1998

PART PIECE NUMBER: P/N 8671021

IAW REFERENCE DRAWING NR 19207 6295383

REVISION NR D DTD 07/10/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5146157

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369001

REVISION NR D DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5602451

REVISION NR E DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12448121

REVISION NR A DTD 10/30/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7364254

REVISION NR L DTD 10/31/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295380

REVISION NR K DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7720553

REVISION NR R DTD 09/23/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7379067

REVISION NR C DTD 11/30/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 5380856

REVISION NR C DTD 06/17/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 6295381

REVISION NR A DTD 07/10/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364379

REVISION NR DTD 08/10/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12478495

REVISION NR DTD 05/08/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12364360

REVISION NR DTD 01/13/2015

PART PIECE NUMBER:

PREP FOR DELIVERY

TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:50 CLNG/DRY:1 PRESV MAT:89

WRAP MAT:GC CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:FF OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER: ZD079

ZD079- ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

02 - ARROW UP

03 - METHOD 50

13 - OPEN THIS SIDE

24 - OPEN FOR INSPECTION OR USE

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129,

SERIAL NUMBER SHALL BE MARKED ON THE UNIT,

INTERMEDIATE AND SHIPPING CONTAINERS.

REFERENCE NUMBER: IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

CLIN 0008 - NSN: 2530014125191

HUB AND ARM ASSEMBLY

REFERENCE NUMBER: RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER: RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION,…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .