PID_PACK.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:001789159

CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

Drawing Exceptions and Inspection:

1. EXCEPTION TO DWG 72303 AS FOLLOWS: OUTER JACKET OF CABLE MAY BE

MARKED WITH INDENTED LETTERS IN LIEU OF SPECIFIED INK OR

RAISED LETTER MARKING.

2. All Cable Assemblies shall be Tested and Inspected to the requirements of drawing 72303, note 3, CAGE 07878.

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS086

REFERENCE NUMBER:CS001

IAW BASIC DRAWING NR 07878 72303

REVISION NR A DTD 08/09/1974

PART PIECE NUMBER: P/N: 72303-25

IAW REFERENCE DRAWING NR 07878 72303-25

REVISION NR A DTD 03/28/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER CS086

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS.BY SUBMITTING

AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML

COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE

APPLICABLE QPL(S)/QML(S).

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.