PID_PACK_SPE4A618R0497.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:003063750

PIVOT ASSY, COWLING

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS001

EXCEPTION DATA:

USE STP63-001 ILO 0227

USE STP51-400 ILO 0701

G14 & 2009C0001-R APPLIES. NUMERICAL REVISION 30 TRANSLATES TO ALPHA

REVISION AK.

SPARES CONFIGURATION

PER B/P EXCEPT 4 RIVET HOLES IN P/N 346051

OMITTED FOR DRAWING 346048

PER B/P EXCEPT 4 NO. 30 HOLES OMITTED FOR

DRAWING 346051

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 98897 346048

REVISION NR A DTD 12/12/1957

PART PIECE NUMBER: 346048

IAW REFERENCE DRAWING NR 98897 346051

REVISION NR B DTD 09/30/1964

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AT DTD 09/25/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR AK DTD 08/21/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR G3 DTD 11/29/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-400

REVISION NR E DTD 09/15/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-400V01

REVISION NR E DTD 10/08/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 0471

REVISION NR G3 DTD 05/20/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200920837

REVISION NR C DTD 05/27/2014

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

NSN:006117042

SUPPORT,STRUCTURAL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:A0003

REFERENCE NUMBER:A1208

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD004

EXCEPTIONS:

373539 (-2) CONFIGURATION

338822 (-999) FORGING

DS5025 SEE NOTE 16 OF WORD DOCUMENT 200415485

STP63-001 USE I/L/O 0227

STP51-400 USE I/L/O 0701

G14 & EO PDF / EO 2009C0001 APPLIES. FINISHES AA, 17, 1 & 28 APPLY.

200920837 C/O EO 2009C0001

2032 FINISH 17

G604 FINISH 1 & 28

G700 PDF/ FINISH 1

STP54-101 PDF/ USE FOR 338822-999 FORGING

0562 USE FOR 338822-999 FORGING

355000, 35111, 0100, 336446 NOT REQUIRED

200415485 NOTES 1, 3, 6, 12 & 16 APPLY.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 98897 373539

REVISION NR F DTD 01/15/1990

PART PIECE NUMBER: 373539-2

IAW REFERENCE DRAWING NR 98897 0562

REVISION NR E DTD 08/14/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 338822

REVISION NR J DTD 03/11/1958

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-400

REVISION NR D DTD 10/08/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-501

REVISION NR L DTD 04/01/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP53-201V01J

REVISION NR M DTD 04/15/1977

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001V01J

REVISION NR T DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 DS5025

REVISION NR AT DTD 09/25/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G604

REVISION NR G1 DTD 08/29/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 36659 LS881

REVISION NR Y DTD 08/03/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP63-001

REVISION NR T DTD 11/13/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR AK DTD 08/21/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP53-201

REVISION NR M DTD 11/30/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G14

REVISION NR G3 DTD 11/29/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-501

REVISION NR L DTD 03/01/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP51-400

REVISION NR E DTD 09/15/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 0471

REVISION NR G3 DTD 05/20/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR C DTD 09/05/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP54-101WV30

REVISION NR Y DTD 06/17/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 G700

REVISION NR V DTD 08/20/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 2032

REVISION NR DTD 02/28/1966

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 200920837

REVISION NR C DTD 05/27/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 STP54-101

REVISION NR Y DTD 11/18/2004

LINE ITEM 00002 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:007612531

CAM FOLLOWER, SLEEVE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

NORTHROP GRUMMAN SYSTEMS CORP

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

DWG EXCEPTIONS:

THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF

THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO

INDICATED.

1. MARKING PER MIL STD-130 IN LIEU OF IM-8.

2. (GD&T) ASME Y14.5 IN LIEU OF 20Y201

REFERENCE NUMBER:CS001

IAW BASIC DRAWING NR 76823 6-73505

REVISION NR B DTD 07/29/1974

PART PIECE NUMBER: 6-73505-7

IAW REFERENCE DRAWING NR 76823 10Y201

REVISION NR AG DTD 09/27/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 HT-3.6

REVISION NR C DTD 10/02/1969

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 NFS-76

REVISION NR H DTD 09/19/1974

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 6-73505

REVISION NR BE DTD 06/17/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 NFS-76

REVISION NR H DTD 10/05/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 6-73509

REVISION NR A DTD 06/24/1964

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 HT-3.6

REVISION NR C DTD 05/25/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 51B221

REVISION NR 28 DTD 10/09/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 76823 6-73505

REVISION NR B DTD 01/13/2016

LINE ITEM 00003 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:010510821

CONTAINER,STOWAGE MAP

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

ENGINEERING DATA REQUIREMENTS:,,

THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF

THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO

INDICATED.

1. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND

DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY

SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT AFLCMC/WWMEX

ENGINEERING ACTIVITY.

2. MARK AND IDENTIFY PER MIL-STD-130 IN LIEU OF FPS-3008.

FAT APPLIES: GOVERNMENT

REFERENCE NUMBER:ZD038

FIRST ARTICLE EXHIBIT AND MATERIAL CERTIFICATIONS SHALL BE SENT TO:

809 MXSS / MXDEB (DODAAC:FB2029)

Bldg 849 Attn: Non Accountable Bay Hill AFB, Ut. 84056-5713 Mark For: First Article Inspection and Test. DO NOT POST

IDENFITY TO:

SAMPLING:

EXPORT CONTROL:

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 81755 16F0203

REVISION NR K DTD 06/22/1995

PART PIECE NUMBER: 16F0203-5

IAW REFERENCE DRAWING NR 81755 16Z001

REVISION NR AK DTD 03/11/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR S DTD 05/21/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3025

REVISION NR B DTD 09/12/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-P6143

REVISION NR 1 DTD 10/19/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0202

REVISION NR N DTD 05/29/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3001

REVISION NR G DTD 07/21/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-P6148

REVISION NR 2 DTD 08/07/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 P6143

REVISION NR B DTD 10/22/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0201

REVISION NR N DTD 01/26/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0202ISS040

REVISION NR N DTD 05/29/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3025

REVISION NR B1 DTD 08/27/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQPL-3025

REVISION NR 4 DTD 01/12/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3001

REVISION NR F DTD 02/03/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-1012

REVISION NR L4 DTD 09/16/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-1012

REVISION NR M DTD 02/16/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 P6148

REVISION NR E DTD 04/20/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0201ISS173

REVISION NR N DTD 01/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0201ISS037

REVISION NR N DTD 01/26/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0202ISS166

REVISION NR N DTD 01/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0203ISS174

REVISION NR U DTD 01/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16F0203ISS133

REVISION NR U DTD 01/23/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3025

REVISION NR B2 DTD 02/05/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001-401M7

REVISION NR FZ DTD 03/11/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR A DTD 05/21/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR B DTD 05/21/2003

LINE ITEM 00004 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN:010957437

ROLLER, BEARING.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

IDENTIFY TO:

REFERENCE NUMBER:A0003

CONTRACTOR FIRST ARTICLE:

REFERENCE NUMBER:ZD042

SAMPLE SIZE: 1 PIECE

BEARING RESTRICTION:

REFERENCE NUMBER:A1166

EXPORT CONTROL:

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD074

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 78286 70217-02723

REVISION NR A4 DTD 06/19/1984

PART PIECE NUMBER: 70217-02723-041

IAW REFERENCE DRAWING NR 78286 70217-02723

REVISION NR A DTD 09/18/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 05 DTD 07/08/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8798

REVISION NR 17 DTD 04/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS4011

REVISION NR 5 DTD 11/27/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70217-02723

REVISION NR AH DTD 04/05/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70217-02723

REVISION NR F DTD 10/01/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8747

REVISION NR 3 DTD 01/23/2008

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 QAP-B02

REVISION NR B DTD 12/11/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 5- DTD 01/29/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8043

REVISION NR 5 DTD 04/29/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS5100

REVISION NR 39 DTD 10/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8013

REVISION NR 09 DTD 11/21/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70217-02723-041

REVISION NR DTD 10/06/2015

LINE ITEM 00005 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:011965959

SLEEVE, KEEPER

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

TECHNICAL DATA PACKAGE - ENGINEERING NOTES DATED SEPT. 22, 2009

1.,,PART MARKING IAW MIL-STD-130, METHOD PER M50GB0920.

2.,,DIMENSIONS AND TOLERANCES PER ASME Y14.5, IN LIEU OF AISI Y14.5-66.

3.,,SURFACE TEXTURE PER ASME B46.1.

4.,,HEAT TREAT ALUMINUM ALLOY PER SAE AMS 2770 AND SAE AMS 2772 IN LIEU

OF MIL-H-6088.

5.,,PENETRANT INSPECT PER ASTM E1417 IN LIEU OF MIL-I-6866.

6.,,USE SAE AMS 4026 ALUMINUM ALLOY 6061 PLATE/SHEET IN LIEU OF

QQ-A-250/11.

7.,,WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE

TO THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: An item, which requires special manufacturing processes, controls, and testing of material or end items.

Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability.

(B) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent performance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof.

(Derived from MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor), which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose. (Derived from MIL-STD-1916).

(D) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required

(E) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measurements, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)].

(F). COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

__X__ Engineering critical in application.

______ Critical characteristics.

__X___ ,,Major characteristics.

__X___ ,,Minor characteristics, all except critical and major.

______ ,,Complex.

______ ,,Available as a commercial product.

8.,,When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation.

Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity.

lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein.

Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel.

When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance.

The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such.

PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE)

______Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing process and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity.

SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE)

______Serialization of each part/assembly (contract end item) is required.

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD074

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 89954 153C5465

REVISION NR B DTD 11/08/1972

PART PIECE NUMBER: 153C5465P1

IAW REFERENCE DRAWING NR 99971 7528102

REVISION NR G DTD 01/31/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 89954 M50GB0920

REVISION NR E DTD 06/19/1997

LINE ITEM 00006 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:014328489

LEAD ASSEMBLY,ELECTRICAL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

EXCEPTIONS TO DRAWING (19207) 12469143, Rev A, dated February 29, 2012 :

1. Braid color shall be black. All additional harness construction requirements shall be as specified in MIL-STD-339, Section 800, dated December 7, 1987 (regardless that MIL-STD-339 is identified as cancelled) per note 2 of TACOM Drawing 12469143, Rev A, dated February 29, 2012.

2. Wire harness & conductor color shall be black.

REFERENCE NUMBER:ZD042

REFERENCE NUMBER:A0003

IAW BASIC DRAWING NR 19207 12469143

REVISION NR A DTD 02/29/2012

PART PIECE NUMBER: 12469143

IAW REFERENCE QAP 19207 QAP-STA458

REVISION NR DTD 09/23/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469143

REVISION NR A DTD 02/17/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469143

REVISION NR DTD 11/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7056700

REVISION NR Y DTD 06/06/2008

LINE ITEM 00007 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:014552242

ARM ACTUATOR

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

REFERENCE NUMBER:ZDL01

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ025

EXCEPTION DATA:

1. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND

BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

2. DISREGARD REFERENCE TO MATERIAL SUBSTITUTION DOCUMENT 65-88700.

3. DIMENSIONING AND TOLERANCING PER ASME Y14.5 IN LIEU OF MIL-STD-8.

4. SURFACE FINISH PER ASTM B46.1 IN LIEU OF BACD 2097.

5. RECOMMEND PROCUREMENT OF NEEDLE BEARING, BOEING PART NUMBER

BACB10B-H69CTK-9, FROM ONE OF THE APPROVED SOURCES LISTED IN THE

SPECIFICATION.

6. FINISH CODE F-12.423 DEFINED: COAT ALL SURFACES WITH LIGHT FILM OF

MIL-PRF-23827, TYPE I, GREASE PRIOR TO INSTALLATION.

7. USE AN 316-8R NUT PER NASM 316.

8. FINISH CODE SRF-1.28 DEFINED: CADMIUM PLATE TO MEET THE REQUIREMENTS

OF AMS-QQ-P-416, TYPE II, CLASS 2. APPLY ONE COAT OF MIL-PRF-23377, TYPE

1, CLASS C2 PRIMER, ACCORDING TO THE

MANUFACTURER'S APPLICATION INSTRUCTIONS AND MIL-F-18264.

9. "disregard reference to 65-19180. Omit all 8 B8 rivet holes."

10. FINISH CODE F-1.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR HANDLING, TRANSPORTATION, AND STORAGE.

11. USE 4340 STEEL BAR PER AMS-S-5000 IN LIEU OF MIL-S-5000.

12. FORGE STEEL PER AMS-F-7190 IN LIEU OF MIL-F-7190.

13. TOOLING POINTS PER BSS 7015 IN LIEU OF BAC 5482.

14. OPTIONAL TO OMIT RAISED LETTERING. OMIT THE WORD "BOEING".

.END OF EXCEPTIONS...

IAW BASIC DRAWING NR 81205 65-41464

REVISION NR A DTD 09/06/1978

PART PIECE NUMBER: 65-41464-2

IAW REFERENCE DRAWING NR 81205 BAC5424

REVISION NR U DTD 03/07/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5617

REVISION NR U DTD 12/13/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5617

REVISION NR U DTD 03/24/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AB DTD 06/22/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACB10B-SH-13

REVISION NR AG DTD 07/09/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 65-38954

REVISION NR A DTD 09/06/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BSS7015

REVISION NR DTD 02/08/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BSS7015

REVISION NR DTD 10/25/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5424

REVISION NR U DTD 09/02/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AB DTD 02/20/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 12/05/2016

LINE ITEM 00008 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:014773659

LEAD,STORAGE BATTERY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CQ006

REFERENCE NUMBER:CQ015

THE CONTRACTOR SHALL RETAIN ALL FIRST ARTICLE UNITS AS PRODUCTION

STANDARDS. DISPOSITION OF APPROVED FIRST ARTICLE TEST SAMPLES: THE

CONTRACTOR MAY DELIVER APPROVED UNDAMAGED FIRST ARTICLE SAMPLES AS PART

OF THE PRODUCTION QUANTITY.

TWO (2) UNITS ARE SUBJECT TO CONSUMPTION/DESTRUCTIVE TESTING

ONE (1) UNIT CAN BE USED AS PART OF THE PRODUCTION QUANTITY.

IAW BASIC DRAWING NR 19207 12339318

REVISION NR D DTD 12/16/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339318

REVISION NR DTD 06/13/2013

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12339318

REVISION NR C DTD 02/03/2012

LINE ITEM 00009 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

NSN:015645379

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS001

REFERENCE NUMBER:T0052

IAW BASIC DRAWING NR 19207 12422948

REVISION NR A DTD 04/01/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420928

REVISION NR E DTD 12/10/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420908

REVISION NR J DTD 11/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420957

REVISION NR C DTD 10/01/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422855

REVISION NR C DTD 01/14/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 SC12422948

REVISION NR A DTD 04/01/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422948

REVISION NR DTD 12/07/2017

LINE ITEM 00010 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER A1208

THESE DOCUMENTS CONTAIN A LEGEND IDENTIFYING

THE DATA AS PROPRIETARY TO THE LOCKHEED

AIRCRAFT CORP (LAC). LAC AUTHORIZED THE

GOVERNMENT TO USE THE DATA IN THE PROCUREMENT

OF AIRCRAFT SPARES AND MAINTENANCE.

ACCORDINGLY, THE DATA MAY BE USED IN THE

MANUFACTURE OF THE PART(S) INDENTIFIED HEREIN.

REFERENCE NUMBER ZD004

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER ZD038

Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer.

Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows:

A: Inspection at origin (Source) - Enter the DCMA office DODAAC listed on page 1 of the contract.

B: Acceptance by other - Enter the issue by office DODAAC listed on page 1 of the contract.

C: Ship to code - Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4).

FIRST ARTICLE TEST MARKING INSTRUCTIONS:

FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package.

REFERENCE NUMBER ZD042

Contractor first article/preproduction approval testing required. Use DI-NDTI-80809B in preparation of the first article report. Current revision of MIL-HDBK-831 may also be used for report format guidance.

First article testing shall be conducted IAW applicable drawings and drawing notes, specification, engineering instructions and specific requirements set forth in the contract. Additionally, 100% dimensional characteristics check shall be performed and results provided to the contracting officer. The first article offered must be manufactured at the facilities in which production quantities are procured under the contract. Contractor shall provide a statement along with objective evidence that test and production items meet the material and process requirements of the contract. If applicable, DD form 1423 documentation shall be provided as required. Unless F.A.T sample(s) is degraded or destroyed in testing or submitted for government fit, form, function verification (when specified by contract), the F.A.T. samples(s) may be deliverable with the last production run of the contract.

Additional Wide Area Workkflow (WAWF) instructions for contractor first article test CLIN: The contractor shall code the receiving report for contractor first article test CLIN in WAWF as follows: Inspection at origin (source)- Enter the DCMA DODAAC listed on page 1 of the contract.

Acceptance at destination- Enter the issue by office DODAAC listed Ship to code- Enter the issue by office DODAAC listed on page 1 of the contract.

REFERENCE NUMBER A1166

RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)

An award can only be made for a bearing manufactured in the United States, its outlying areas, or Canada and the cost of the bearing components (bearing element, retainer, inner race, outer race) manufactured in the United States, its outlying areas, or Canada must exceed 50% of the total cost of the bearing components of that ball or roller bearing. See DFARS Clause 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (Jun 2011). A Contractor's declaration on the domestic/foreign nature of the material being offered is required. To obtain a copy of the "Contractors Declaration Form" please visit the DLA Aviation Foreign Bearing Website at http://www.dla.

mil/Aviation/Business/IndustryResources/DLAResourcesforSuppliers/ ForeignBearingWaiver.aspx Please have the completed form ready for submission upon request by the Acquisition Specialist. Failure to provide this information may result in your quote not being considered for award. In the event no offered bearings meet this sourcing requirement, this solicitation may be cancelled and a waiver may be requested by the procurement activity. Upon receipt of an approved waiver, the requirement may be resolicited. See FAR 225.7009-4, Waiver, Restriction on Ball and Roller Bearings (DEC 2010).

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL

OF A TYPE')

REFERENCE NUMBER A1054

PRESERVATION, PACKAGING, PACKING, AND MARKING

REQUIREMENTS SHALL BE IN ACCORDANCE WITH

MIL-DTL-197M.

1. METHOD OF PRESERVATION SHALL BE DETERMINED BY

BEARING TYPE AND SIZE (REFER TO TABLE I).

2. PARAGRAPH 3.10.2, SELECTION OF UNIT

PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR

PRESERVATIVE COMPOUND SHALL BE DETERMINED

DEPENDENT UPON BEARING TYPE AND CLOSURE IN

ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.

FOR PRESERVATION PROCESS CONTROLS, DEPENDANT

UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)>

PARAGRAPHS 3.4 THROUGH 3.9 APPLY.

3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS

OF PARAGRAPH 3.12.4 APPLY.

4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE

TO THE QUALITY ASSURANCE VERIFICATION

REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF

MIL-DTL-197L.

...END OF SPECIAL PACKAGING INSTRUCTIONS...

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER ZDL01

A BOEING RIGHTS GUARD LICENSE AGREEMENT 01 RESTRICTED TECHNICAL DATA

PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION

CONDITIONS APPLY.

VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN

THE "01 BOEING RIGHTS GUARD" LICENSE AGREEMENT FOLDER AVAILABLE AT

https://pcf1x.bsm.dla.mil/cFolders

REFERENCE NUMBER RQ025

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CQ006

"CONTRACTOR/MANUFACTURER IS REQUIRED TO

ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT

MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994,

AMERICAN NATIONAL STANDARD FOR CALIBRATION -

CALIBRATION LABORATORIES AND MEASURING AND TEST

EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1,

QUALITY ASSURANCE REQUIREMENTS FOR MEASURING

EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION

SYSTEM FOR MEASURING EQUIPMENT."

REFERENCE NUMBER CQ015

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

REFERENCE NUMBER T0052

NO SHELF LIFE