AM_General_Contract_SPE4A614D5AAA_Redacted.pdf

CONTINUED ON NEXT PAGE

NSN 3120-01-186-5527

This is an Indefinite Delivery Purchase Order (IDPO) effective June 9, 2014 through June 8, 2019. As stated in option clause 52.217-09, the anticipated duration of this IDPO is 5 years or until it reaches $150,000.00, whichever comes first.

This IDPO is for stock buys only.

FOB Destination

Inspection and Acceptance at Origin

Quantity Variance is Plus/Minus 0%

Delivery: 180 days after receipt of order

“Ship to” addresses will be cited on each delivery order. All deliveries will be within the continental United States.

Partial and/or early delivery is authorized at no additional cost to the government.

Accounting and Appropriation Data to be cited on each individual delivery order.

Payment will be made to the current address in the CCR Database.

The Guaranteed Minimum of 2408 each is applicable to the base period only. There is no guarantee that the Government will place any orders after the guaranteed minimum order for base period of the contract/order.

Quantities shown are applicable to both the base and option years:

Estimated Annual Demand Quantity: 9633 each

Minimum Delivery Order Quantity: 2408 each Maximum Delivery Order Quantity: 4816 each

Price for the Base Period (3 Years) $4.67 each

Price for the Option Period (2 Years) $ each

ALL APPLICABLE SOLICITATION CLAUSES ARE INCORPORATED BY REFERENCE.

CONTRACTOR CLEARED FOR EXPORT CONTROL TECHNICAL DATA UNDER CERTIFICATION

NUMBER 0026894, EXPIRES 11/15/2016.

"Material Certifications shall be required for each component of the end item at time of inspection."

SECTION B

SUPPLIES/SERVICES: 3120-01-186-5527

MFR. CAGE: 34623 P/N: 12338270

ITEM DESCRIPTION:

BUSHING, SLEEVE

P/N: 12338270

IDENTIFY TO:

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

EXPORT CONTROL:

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY

CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF

GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25."

MIL-STD 129 TYPE 1 SHELF 36 MONTHS

AGE LIMITATIONS CRITERIA FOR TYPE I AND II

SHELF-LIFE ITEMS. THE FOLLOWING TABLE

SPECIFIES THE REMAINING SHELF-LIFE IN QUARTERS

REQUIRED AT THE TIME OF DELIVERY TO THE

GOVERNMENT. (FOR RUBBER PRODUCTS, AGE CALCULATED

FROM QUARTER/YEAR FOLLOWING CURE DATE QUARTER,

SUPPLY/SERVICE: 3120-01-186-5527 MFR. CAGE: 34623 P/N: 12338270 CONT'D

TO QUARTER/YEAR OF RECEIPT).

SHELF-LIFE REMAINING REMAINING

IN MONTHS . . . . MONTHS . . . . . QUARTERS

OVER 60 ________ NOT MORE THAN 12 MONTHS EXPIRED

60 ______________ 51 ______________ 17 48 ______________ 42 ______________ 14 36 ______________ 30 ______________ 10 24 ______________ 21 _______________ 7 18 ______________ 15 _______________ 5 12 _______________ 9 _______________ 3

THE MOST RECENT REVISION OF MIL-STD-129 APPLIES

FOR THIS NSN. SHELF-LIFE FOR THIS NSN IS AS

FOLLOWS:

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

FAR CLAUSE 52.246-11 APPLIES. A QUALITY MANAGEMENT PROGRAM MEETING THE

REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008

(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;

OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008

(EXAMPLE SAE AS 9003) IS REQUIRED. IN THE TAILORED VERSION OF THE ISO

9001:2008, ANY REFERENCES WHICH CITE THE ENTIRE INTERNATIONAL STANDARD

ARE INTERPRETED AS EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual, [excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2 Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internal audit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

SUPPLY/SERVICE: 3120-01-186-5527 MFR. CAGE: 34623 P/N: 12338270 CONT'D

8.5.2 Corrective action

8.5.3 Preventive action

IAW BASIC DRAWING NR 19207 12338270

REVISION NR C DTD 12/04/2003

PART PIECE NUMBER: 12338270

IAW REFERENCE QAP 19207 12338270

REVISION NR B DTD 02/04/2005

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 QAP-B02

REVISION NR B DTD 12/11/2013

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129P(4)

REVISION NR P DTD 10/03/2006

PART PIECE NUMBER: TYPE 1 36 MONTHS

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 3120-01-186-5527 EA $ $

CAGE/PN: 34623

12338270

BUSHING,SLEEVE

PRICING TERMS: Firm Fixed Price

BASE PERIOD.

SUPPLIES/SERVICES: 3120-01-186-5527

MFR. CAGE: 34623 P/N: 12338270

Delivery CLIN Price (in days) .

0001 $ 4.67 180

OPTION 01

SUPPLIES/SERVICES: 3120-01-186-5527

MFR. CAGE: 34623 P/N: 12338270

Delivery CLIN Price (in days) .

0001 $ 180

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

SUPPLY/SERVICE: 3120-01-186-5527 MFR. CAGE: 34623 P/N: 12338270 CONT'D

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE:

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = 1: PRESV MAT = XX:

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = E5: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 -

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B

DATED 08183

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

GOVT USE

External External External Customer RDD/

ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 1000025384 0001 N/A N/A N/A N/A

SECTION D - PACKAGING AND MARKING

252.211-7006 RADIO FREQUENCY IDENTIFICATION (SEP 2011) DFARS

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that—

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I – Packaged operational rations.

(B) Class II – Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP – Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV – Construction and barrier materials.

(E) Class VI – Personal demand items (non-military sales items).

(F) Subclass of Class VIII – Medical materials (excluding pharmaceuticals, biologicals, and reagents – suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX – Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to—

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to—

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number Location Name City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures.

(c) The Contractor shall—

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC™ Tag Data Standards in effect at the time of contract award. The EPC™ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal™ subscriber and possesses a unique EPC™ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC™ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1).

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph

(d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

52.211-9010 SHIPPING LABEL REQUIREMENTS – MILITARY-STANDARD (MIL-STD) 129P (MAR 2012) DLAD

52.211-9010 SHIPPING LABEL REQUIREMENTS – MILITARY STANDARD (MIL-STD) 129P (NOV 2011), ALT I (AUG 2005)

DLAD

52.211-9033 PACKAGING AND MARKING REQUIREMENTS (APR 2008) DLAD

52.211-9095 PALLETIZATION OF SHIPMENTS (SEP 2012) DLAD

52.246-9062 REPACKAGING TO CORRECT PACKAGING DEFICIENCIES (SEP 2008) DLAD

52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) DLAD

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999) FAR

The Contractor shall comply with the higher-level quality standard selected below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]

Title Number Date Tailoring

[] ISO 9001:2008

[Contracting Officer insert the title, number (if any), date, and tailoring (if any) of the higher-level quality standards.] (End of clause)

52.246-9003 MEASURING AND TEST EQUIPMENT (JAN 2014) DLAD

52.246-9008 INSPECTION AND ACCEPTANCE AT ORIGIN (NOV 2011) DLAD

(a) Inspection and Acceptance are at Origin.

(b) The point of acceptance will be the point of last inspection before shipment unless otherwise indicated by the offeror.

(c) The Offeror shall indicate below the location where supplies will be inspected:

Supplies:

Plant:

Commercial and Government Entity (CAGE) Code: 34623 Street: 408 S BYRKIT ST City/State/Zip: MISHAWAKA, IN 46544-3012 Applicable to contract line-item(s) (CLIN(s):

ALL

(d) The Offeror shall indicate below the location where packaging will be inspected:

Packaging:

[ X ] Same as for supplies, or, Plant:

Cage Code:

Street:

City/St/Zip:

Applicable to clin(s):

SECTION F - DELIVERIES OR PERFORMANCE

52.211-16 VARIATION IN QUANTITY (APR 1984) FAR

(b) The permissible variation shall be limited to:

0 Percent increase 0 Percent decrease This increase or decrease shall apply to TOTAL CONTRACT QUANTITY .

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.211-9020 TIME OF DELIVERY - ACCELERATED (JUN 2008) DLAD

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

52.247-48 F.O.B. DESTINATION - EVIDENCE OF SHIPMENT (FEB 1999) FAR

52.247-9016 F.O.B. DESTINATION CONTRACTOR TRANSSHIPMENT (NOV 2011) DLAD

52.247-9031 MANUFACTURER'S LOADING PRACTICES (NOV 2011) DLAD

52.247-9035 SHIPPING INSTRUCTIONS (DOMESTIC) (NOV 2011) DLAD

Mail instructions (not applicable to Army Post Office (APO) or Fleet Post Office (FPO) addresses):

(a) Route domestic shipments within mail limitations as follows based on the transportation priority (TP) reflected in the "mark for" data with each contract line item number (CLIN). Commercial small parcel carrier (e.g., United Parcel Service (UPS) or Federal Express) is an acceptable mode of shipment to domestic addresses.

(1) Ship all NMCS, 777, and 999, regardless of TP or distance, by commercial small parcel carrier.

(2) Ship TP 1 and 2 (IPD 01-08) by priority mail or most economical comparable mode.

(3) Ship TP 3 (IPD 09-15) and all stock locations (not TP coded) by surface parcel post (Fourth Class) or most economical comparable mode.

(4) The cost of parcel post insurance will not be paid by the Government.

(b) Freight instructions (domestic).

(1) Ship all NMCS, 777, and 999, regardless of TP or distance by commercial small parcel carrier.

(2) For TP 1 and 2 (IPD 01-08) weighing under 250 pounds, use air freight and specify air on the invoice. Exceptions: if destination is within 600 miles of origin, use regular surface transportation.

(3) For all other freight shipments, contact the cognizant transportation officer for delivery and carrier routing instructions.

(4) Advance telephonic notice of delivery must be given by the carrier to the consignee's transportation officer (transport control/prelodge desk) at least 24 hours prior to delivery of freight shipments (other than small parcels). Bills of lading must be annotated to reflect this requirement. Addresses for direct shipments within the contiguous United States (CONUS) and Canada are shown "in the clear" with each individual CLIN on schedule continuation sheet(s) in each order. Addresses for stock shipments are shown with each individual CLIN on schedule continuation sheet(s) in each order.

(End of Clause)

52.247-9038 SHIPPING INSTRUCTION FOR DLA DIRECT ACQUISITIONS (NOV 2011) DLAD

52.247-9034 POINT OF CONTACT FOR TRANSPORTATION INSTRUCTIONS (JUN 2013) DLAD

SECTION H - SPECIAL CONTRACT REQUIREMENTS

52.246-9039 REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES (NOV 2011) DLAD

(a) The Contractor shall remove or obliterate from a rejected end item and its packing and packaging, any marking, symbol, or other representation that the end item or any part of it has been produced or manufactured for the United States Government. Removal or obliteration shall be accomplished prior to any donation, sale, or disposal in commercial channels. The Contractor, in making disposition in commercial channels of rejected supplies, is responsible for compliance with requirements of the Federal Trade Commission Act (15 United States Code (U.S.C.) 45 et seq.) and the Federal Food, Drug and Cosmetic Act (21 U.S.C. 301 et seq.), as well as other Federal or State laws and regulations promulgated pursuant thereto.

(b) Unless otherwise authorized by the Contracting Officer, the Contractor is responsible for removal or obliteration of government identifications within 72 hours of rejection of nonconforming supplies including supplies manufactured for the Government but not offered or supplies transferred from the Government's account to the cold storage Contractor's account at origin or destination. (For product rejected at destination and returned to the Contractor's plant, the 72 hour period starts with the time of Contractor receipt of returned product). After removal or obliteration is accomplished and prior to disposition, the Contractor must notify the Government inspector.

(End of Clause)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS

252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013) DFARS

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7004 ALTERNATE A, SYSTEM FOR AWRD MANAGEMENT (FEB 2014) DFARS

252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION (NOV 2013) DFARS

52.209-06 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR SUSPENSION (AUG 2013) FAR

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) FAR

252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS (NOV 2005) DFARS

(4) If the proposed SPI process has been accepted at the facility at which it is proposed for use, but is not yet listed at the Internet site specified in paragraph (b) of this clause, submit documentation of Department of Defense acceptance of the SPI process.

(d) Absent a determination that an SPI process is not acceptable for this procurement, the Contractor shall use the following SPI processes in lieu of military or Federal specifications or standards:

(Offeror insert information for each SPI process) SPI Process:

Facility:

Military or Federal Specification or Standard:

Affected Contract Line Item Number, Subline Item Number, Component, or Element:

52.211-9004 PRIORITY RATING FOR VARIOUS LONG-TERM CONTRACTS (NOV 2011) DLAD

52.211-9052 NOTIFICATION TO GOVERNMENT OF AND CONTEMPLATED PRODUCTION PHASE-OUT (NOV 2011) DLAD

52.215-08 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (OCT 1997) FAR

52.216-19 ORDER LIMITATIONS (OCT 1995) FAR

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 2408 EACH, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor—

(1) Any order for a single item in excess of 4816 EACH ;

(2) Any order for a combination of items in excess of 4816 EACH ; or

(3) A series of orders from the same ordering office within 30 DAYS days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d ) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 DAYS days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

252.216-7006 ORDERING (MAY 2011) DFARS

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from DATE OF AWARD through EXPIRATION DATE [insert dates].

52.217-09 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) FAR

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 DAYS [insert the period of time within which the Contracting Officer may exercise the option]; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 DAYS days [60 days unless a different number of days is inserted] before the contract expires.

The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 YEARS (months) (years).

(End of clause)

52.219-28 POST AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) FAR

(g) If the Contractor does not have representations and certifications in ORCA, or does not have a representation in ORCA for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [] is not a small business concern under NAICS Code assigned to contract number .

[Contractor to sign and date and insert authorized signer’s name and title]:

Signature: ______________________________________

Date: ______________________________________

Title: ______________________________________ (End of clause)

52.222-03 CONVICT LABOR (JUN 2003) FAR

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2014) FAR

52.222-20 WALSH-HEALEY PUBLIC CONTRACTS ACT (OCT 2010) FAR

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) FAR

52.222-26 EQUAL OPPORTUNITY (MAR 2007) FAR

52.222-36 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010) FAR

52.222-50 COMBATTING TRAFFICKING IN PERSONS (FEB 2009) FAR

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) FAR

252.225-7013 DUTY-FREE ENTRY (OCT 2013) DFARS

52.232-01 PAYMENTS (APR 1984) FAR

52.232-08 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR

52.232-11 EXTRAS (APR 1984) FAR

52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986) FAR

52.232-25 PROMPT PAYMENT (JUL 2013) FAR

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS

52.232-9010 ACCELERATED PAYMENTS TO SMALL BUSINESS (APR 2014) DLAD

52.233-01 DISPUTES (JUL 2002) FAR

52.233-03 PROTEST AFTER AWARD (AUG 1996) FAR

52.233-04 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR

52.243-01 CHANGES - FIXED PRICE (AUG 1987) FAR

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS

52.244-06 SUBCONTRACTS FOR COMMERCIAL ITEMS (DEC 2013) FAR

52.246-9054 WARRANTY ACCEPTANCE OF SUPPLLIES (NOV 2011) DLAD

252.247-7023 TRANSPORATION OF SUPPLIES BY SEA (APR 2014) DFARS

52.248-01 VALUE ENGINEERING (OCT 2010) FAR

(3) The source of the savings (the instant contract, or concurrent and future contracts), as follows:

CONTRACTOR'S SHARE OF NET ACQUISITION SAVINGS (Figures in percent) Contract Type : ______________ __________________

Incentive (Voluntary) : ___________________ _________ Program Requirement (Mandatory) : _____ ___________ Instant Contract Rate Concurrent and Future Contract Rate : ________ __ _____ Instant Contract Rate : ________________ __________ _ Concurrent and Future Contract Rate : _ ______________

(m) Data. The Contractor may restrict the Government’s right to use any part of a VECP or the supporting data by marking the following legend on the affected parts:

These data, furnished under the Value Engineering clause of contract ________ ________ , shall not be disclosed outside the Government or duplicated, used, or disclosed, in whole or in part, for any purpose other than to evaluate a value engineering change proposal submitted under the clause .

52.249-01 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) (SHORT FORM) (APR 1984) FAR

52.249-08 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) FAR

52.252-02 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) FAR

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.dla.mil/Acquisition and http://farsite.hill.af.mil/ .

(End of Clause)

52.252-06 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) FAR

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the clause.

(b) The use in this solicitation or contract of any DoD FAR Supplement (DFARS) (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

(End of Clause)

52.253-01 COMPUTER GENERATED FORMS (JAN 1991) FAR