OCP_NSNS.pdf

NSN: 9925-01-673-0367

SHAWL, PRAYER: (TALLIT WITH TZITZIT), OPERATIONAL CAMOUFLAGE PATTERN (OCP)

WITH TZITIT SHALL BE AS FOLLOWS: BASIC MATERIAL SHALL IN ACCORDANCE WITH

MIL-DTL-31033B TYPE II, CLASS 4. THE TALLIT SHALL BE A MINIMUM OF 18

INCHES IN WIDTH AND 60 INCHES IN LENGTH. THE SEWING OF THE TALLIT SHALL

USE POLYESTER CORE THREAD CONFORMING TO 70/2 OR 3 PLY; THE TALLIT SHALL BE TOPSTITCHED AND HEMMED WITH A 3/16 INCH (+/-1/16 INCH) HEM. USE OF THREAD CONTAINING LINEN PROHIBITED

THROUGHOUT THE CONSTRUCTION OF THIS ITEM.

A BLACK STAR OF DAVID SHALL BE EMBROIDERED ONTO EACH END OF THE TALLIT

IMMEDIATELY ABOVE EMBROIDERED TABLETS. THE BOTTOM LINE OF THE TABLET

SHALL BE POSITIONED APPROX 3-1/2(+/-1/4 INCH) FROM THE BOTTOM OF THE

TALLIT. EACH LINE OF THE STAR OF DAVID SHALL BE ONE INCH LONG. THE

TABLETS ARE CENTERED IMMEDIATELY BENEATH THE STAR OF DAVID WITH EACH

TABLET MEASURING APPROX 1-3/4 INCHES IN HEIGHT AND 1/2 INCH WIDE,

ENCLOSED IN AN OVERALL TABLET DESIGN MEASURING APPROX 2 INCHES HIGH AND

1-3/4 INCHES WIDE. HEBREW LETTERS REPRESENTING EACH OF THE TEN

COMMANDMENTS SHALL BE EMBROIDERED ON THE TABLETS IN A ROW FROM TOP TO

BOTTOM, FIVE LETTERS PER TABLET. EACH LETTER IS APPROXIMATELY 1/4 INCH

IN HEIGHT AND SLIGHTLY LESS IN WIDTH DEPENDING ON THE LETTER. ALL

EMBROIDERY SHALL BE A GOOD MATCH TO DESERT SAND 503. AN EYELET OF 1/4

INCH (+/-1/8") IN DIAMETER SHALL BE SEWN IN EACH OF THE FOUR CORNERS OF

THE TALLIT. THIS EYELET MUST BE POSITIONED IN EACH CORNER, 2 INCHES (+/-

1/4") FROM THE BOTTOM EDGE AND THE SAME DISTANCE FROM THE SIDE EDGE OF

THE TALLIT. TASSELS (FRINGES, OR TZITZIT IN HEBREW) MADE FROM WOOL OR

SILK THREADS SHALL BE THREADED THROUGH EACH EYELET ACCORDING TO THE

INSTRUCTIONS BELOW. THE EMBROIDERY THREAD SHALL CONFORM TO 150/2 DENIER

RAYON, BRIGHT LUSTER, MULTIFILAMENT, BLACK THE TALLIT SHALL BE FOLDED

AND PACKAGED IN A RECLOSABLE POLY BAG. USE OF THREAD CONTAINING LINEN

PROHIBITED THROUGHOUT THE CONSTRUCTION OF THIS ITEM.

INSTRUCTIONS FOR MAKING TZITZIT: THE TASSELS (FRINGES, OR TZITZIT)

REQUIRE RABBINICAL CERTIFICATION STATING THAT THEY ARE MADE OF THREAD

SPUN ESPECIALLY FOR TZITIT. THE TASSELS (FRINGES OR TZITIT) ARE

TRADITIONAL AND MUST BE MADE ACCORDING TO JEWISH LAW. CERTIFIED PACKAGES

OF FRINGES WILL CONTAIN 16 STRINGS, FOUR FOR EACH CORNER. FOUR OF THESE

STRINGS ARE LONGER THAN THE REST, AND THEY ARE USUALLY WOUND AROUND THE

OTHERS. ONE OF THESE LONGER STRINGS CALLED "SHAMASH" IS USED IN EACH

CORNER AND SERVES TO MAKE THE WINDINGS. MAKE FOUR UNITS OF FOUR STRINGS

EACH. EACH UNIT WILL HAVE A LONG STRING AND THREE EQUAL LENGTH STRINGS.

THE FOLLOWING SHOULD BE REPEATED FOR EACH EYELET

ON EACH CORNER:

1. TAKE ALL FOUR STRINGS AND PLACE THEM THOUGH

THE EYELET. ADJUST THEM SO THAT THEY ARE ALL

EVEN (EXCEPT FOR THE SHAMASH, WHICH REMAINS

LONGER ON ONE SIDE). FOLD THE STRINGS WITH THE

EYELET AT THE CENTER OF THE FOLD. THE FOUR

STRINGS ARE NOW DOUBLED INTO EIGHT.

2. MAKE A DOUBLE KNOT (SQUARE KNOT OR A GRANNY

KNOT), WITH FOUR STRINGS ON EACH SIDE.

3. TAKE THE SHAMASH AND WIND IT AROUND THE

OTHER SEVEN STRINGS. MAKE SEVEN WINDINGS.

4. MAKE ANOTHER DOUBLE KNOT.

5. MAKE EIGHT WINDINGS.

6. MAKE A DOUBLE KNOT.

7. MAKE ELEVEN WINDINGS.

8. MAKE A DOUBLE KNOT.

9. MAKE THIRTEEN WINDINGS.

10. MAKE A FINAL DOUBLE KNOT.

THE TZITZIT ARE NOW COMPLETE. THE TZITZIT

SHOULD CONTAIN FIVE KNOTS AND FOUR GROUPS OF

WINDINGS.

COMMERCIAL PACKAGING TO ASTM-D-3951 PRES/PACK TO ASTM-D-3951 – GOOD COMMERCIAL PRACTICE IS

REQUIRED.

MARKING IAW MIL-STD-129 & MIL-HDBK-129

NSN: 9925-01-673-0359

SHAWL, PRAYER, NYLON, OPERATIONAL CAMOUFLAGE PATTERN (OCP)

SHAWL, PRAYER,; BASIC MATERIAL SHALL BE MADE IN

ACCORDANCE WITH MIL-DTL-31011B TYPE II, CLASS 4; STAR OF DAVID WITH

TABLETS BENEATH STAR EMBROIDERED ON TO EACH END OF THE TALLIT

POSITIONED 2-1/2" FROM BOTTOM OF TALLIT; TABLETS CENTERED BENEATH STAR

OF DAVID; EMBROIDERY THREAD FOR THE STAR OF DAVID AND TABLETS SHALL BE A

GOOD MATCH TO FOLIAGE GREEN 502; HEBREW LETTERS REPRESENTING EACH OF THE

TEN COMMANDMENTS EMBROIDERED ON THE TABLETS IN A ROW FROM TOP TO BOTTOM,

5 PER TABLET; EMBROIDERY THREAD FOR THE HEBREW LETTERS SHALL BE A GOOD

MATCH TO DESERT SAND 503; FOLDED AND PACKAGED IN A RESEALABLE POLY BAG

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER

TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE

STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

INTERIM CHANGES TO MIL-DTL-31011 Rev B 10-Feb-2005:

THE STANDARD SAMPLE FOR TYPES I, III, AND IV, CLASS 1, FOR SHADE AND

APPEARANCE SHALL BE ROLL #3389.

THE STANDARD SAMPLE FOR TYPE II, CLASS 1, FOR SHADE AND APPEARANCE SHALL

BE ROLL #3682.

THE STANDARD SAMPLE FOR TYPES I, III, AND IV FOR SHADE AND APPEARANCE

SHALL BE ROLL #3698.

INTERIM STANDARD SAMPLE FOR FOLIAGE GREEN 504 IS MIL-C-44436, ROLL #3729

(THE FOLIAGE GREEN 502 AREA OF THE PATTERN), REFERENCED FOR SHADE ONLY.

STANDARD SAMPLE FOR TYPE II CLASS 4,UNIVERSAL CAMOUFLAGE IS ROLL #3753

AND IS REFERENCED FOR SHADE ONLY.

PAGE 1, 1.2 UNDER TYPE II, ADD: "CLASS 5 - TIGER STRIPE CAMOUFLAGE"

PAGE 4, DRAWINGS, ADD: "DLA TROOP SUPPORT

05-AFCTO-194-DIGITAL TIGER STRIPE CAMOUFLAGE PATTERN

(COPIES OF DRAWINGS ARE AVAILABLE FROM THE DLA TROOP SUPPORT, ATTN: DLA

TROOP SUPPORT -FQSAB, 700 ROBBINS AVE. PHILADELPHIA, PA 19111-5092)"

PAGE 5, PARAGRAPH "3.3 PERFORMANCE REQUIREMENTS." DELETE THE PARAGRAPH

IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING NEW PARAGRAPH: "3.3

MATERIAL. THE BASIC MATERIAL FOR ALL TYPES AND CLASSES SPECIFIED IN 1.2

SHALL BE A NYLON MATERIAL CONFORMING TOTHE REQUIREMENTS IN TABLE I BELOW

AND 3.4 THROUGH 3.12. THE FINISHED MATERIAL SHALL BE TESTED AS SPECIFIED

IN 4.3.3.".

AFTER PARA. 3.9.4 ADD NEW PARA. "3.9.5 CLASS 5, TIGER STRIPE PATTERN.

THE COLOR OF THE FACE SIDE OF THE CLOTH SHALL BE THEAIR FORCE DIGITAL

TIGER STRIPE CAMOUFLAGE PATTERN AND SHALL MATCH TAN 1639, GRAY 1640,

SAGE GREEN 1641 AND BLUE 1642. EACHAREA OF THE SPECIFIC COLOR OF THE

PATTERN SHALL BE IN ACCORDANCE WITH THE APPLICABLE STANDARD SAMPLE.

THE COLOR OF THE BACK SIDE OF THE CLOTH SHALL BE SAGE GREEN 1641 OR SHOW

TIGER STRIPE STRIKE-THROUGH FROM THE FACE SIDE PRINT.BOTH SIDES OF THE

CLOTH SHALL MATCH THE RESPECTIVE SIDE OF THE STANDARD SAMPLE.".

ADD: "3.10.2 CLASS 5, TIGER STRIPE CAMOUFLAGE PATTERN EXECUTION.

THE TIGER STRIPE CAMOUFLAGE PATTERN SHALL REPRODUCE THE STANDARD

SAMPLE IN RESPECT TO DESIGN, COLORS AND REGISTRATION OF THE

RESPECTIVE AREAS. THE PATTERN REPEAT OF THE DYED, PRINTED, AND FINISHED

CLOTH SHALL BE 17.0 INCHES (+/-1.0 INCH) IN THE WARPDIRECTION. THE

VARIOUS AREAS OF THE PATTERN SHALL BE PROPERLY REGISTERED IN RELATION TO

EACH OTHER AND SHALL PRESENT DEFINITESHARP DEMARCATIONS WITH A MINIMUM

OF FEATHERING OR SPEW. EACH PATTERN AREA SHALL SHOW SOLID COVERAGE;

SKITTERNESS EXCEEDING THAT SHOWN BY THE STANDARD SAMPLE IN ANY OF THE

PRINTED AREAS SHALL NOT BE ACCEPTABLE. WHEN THE STANDARD SAMPLE IS

NOTREFERENCED FOR PATTERN EXECUTION OR DESIGN, A PATTERN DRAWING SHALL

BE PROVIDED, AND THE PATTERN ON THE FINISHED CLOTH SHALLMATCH THAT OF

DRAWING 05-AFCTO-194.".

ADD: TABLE IV A

Table IV A Spectral reflectance requirements; Reflectance (percent)

Tan 1639 Gray 1640 Sage Green 641 Blue 1642 Wave Min Max Min Max Min Max Min Max length (nm) 600 30 40 16 26 9 18 9 18 620 32 42 16 26 9 18 9 18 640 35 48 18 28 11 20 11 20 660 37 56 21 30 13 26 13 26 680 42 60 22 34 13 26 13 26 700 43 60 24 38 15 28 15 28 720 47 62 26 42 16 30 16 30 740 48 64 30 46 16 30 16 30 760 48 64 32 48 20 32 20 32 780 52 68 34 48 20 34 20 34 800 52 68 34 48 22 36 22 36 820 52 68 36 52 24 38 24 38 840 53 70 38 52 24 38 24 38 860 53 70 40 53 26 40 26 40

PAGE 13, TABLE V, AT THE END OF DEFECTS ADD: "TIGER STRIPE PATTERN ---

LESS THAN 16.0 INCHES OR MORE THAN 18.0 INCHES ---

MAJOR-----123".

PAGE 15, TABLE VI, UNDER THE CHARACTERISTIC OF "WATER PERMEABILITY:"

DELETE LINE READING "AFTER SYNTHETIC PERSPIRATION-------3.3-------4.4.12

& 4.4.7" AND SUBSTITUTE THE FOLLOWING:

CHARACTERISTIC REQUIREMENT PARAGRAPH TEST METHOD

"AFTER SYNTHETIC PERSPIRATION

INITIAL AND AFTER LAUNDERING 3.3 4.4.12,4.4.14,

AND 4.4.7"

PAGE 21, PARAGRAPH 4.4.12, ADD THE FOLLOWING TO THE END OF THE

PARAGRAPH:"FOR TESTING THE "INITIAL" CONDITION, THE TEST SPECIMEN SHALL

BE AS SPECIFIED BY THE APPLICABLE TEST METHOD. FOR TESTING THE "AFTER

LAUNDERING" CONDITION, THE LAUNDERING TEST SHALL BE CONDUCTED IN

ACCORDANCE WITH 4.4.14 FOR ONE LAUNDERING AND DRYING CYCLE AND ONE

LAUNDERING SAMPLE, 48 INCHES BY THE FULL WIDTH OF THE CLOTH; THE

SPECIMEN AREAS FOR THE TEST LIQUID SHALL BE MARKED ON THE FACE SIDE

(USING A LAUNDRY MARKER PEN) FOR THE SPECIMEN AREAS FOR WATER

PERMEABILITY; AFTER LAUNDERING, THE SPECIMEN MAY BE CUT FROM THE

LAUNDERED SAMPLE TO FACILITATE PERFORMANCE PROPERTY TESTING IN

ACCORDANCE WITH 4.4.7. FIVE (5) SPECIMENS (MINIMUM) SHALL BE TESTED FOR

EACH OF THE "INITIAL" AND THE "AFTER LAUNDERING" CONDITIONS."

PAGE 24, UNDER CUSTODIAN: DELETE "AIR FORCE - 99" AND SUBSTITUTE

"AIR FORCE - 11".

COMMERCIAL PACKAGING TO ASTM-D-3951 PRES/PACK TO ASTM-D-3951 – GOOD COMMERCIAL PRACTICE IS

REQUIRED

NSN: 9925-01-673-0282

SHAWL, PRAYER, OPERATIONAL CAMOUFLAGE PATTERN (OCP), shall be of commercial design and fabricated from material in accordance with Class 8 of MIL-DTL-44436.

The SHAWL, PRAYER shall be commercial size # 55, approximately 51 inches by 71 inches and sized to fit individuals 5 feet 2 inches to 5 feet 4 inches tall.

COMMERCIAL PACKAGING TO ASTM-D-3951 PRES/PACK TO ASTM-D-3951 – GOOD COMMERCIAL PRACTICE IS

REQUIRED

NSN: 9925-01-673-0292

SHAWL, PRAYER (TALLIT), OPERATIONAL CAMOUFLAGE PATTERN (OCP)

The shawl, prayer,(tallit) shall be of commercial design and fabricated from material in accordance with Class 8 of MIL-DTL-44436.

The tallit shall be commercial size # 60, approximately 56 inches by 76 inches and sized to fit individuals 5 feet 5 inches to 5 feet 7 inches tall.

COMMERCIAL PACKAGING TO ASTM-D-3951 PRES/PACK TO ASTM-D-3951 – GOOD COMMERCIAL PRACTICE IS

REQUIRED

NSN:9925-01-673-0379

SHAWL, PRAYER (TALLIT), OPERATIONAL CAMOUFLAGE PATTERN (OCP) The shawl, prayer (tallit) shall be of commercial design and fabricated from material in accordance with Class 8 of MIL-DTL-44436.

The shawl, prayer, (tallit) shall be commercial size # 70, approximately 60inches by 80 inches and sized to fit individuals 5 feet 8 inches to 5 feet 10 inches tall.

NSN: 9925-01-673-0284

SHAWL, PRAYER,(TALLIT), OPERATIONAL CAMOUFLAGE PATTERN (OCP) The shawl, prayer,(tallit) shall be of commercial design and fabricated from material in accordance with Class 8 of MIL-DTL-44436.

The shawl, prayer(tallit) shall be commercial size # 18, one size fits all.

COMMERCIAL PACKAGING TO ASTM-D-3951 PRES/PACK TO ASTM-D-3951 – GOOD COMMERCIAL PRACTICE IS

REQUIRED

NSN: 9925-01-673-0141

Yarmulke, OPERATIONAL CAMOUFLAGE PATTERN (OCP)

Material Shall be in accordance with MIL-DTL-44436, Class 7

MIL-DTL-44436 CLOTH, CAMOUFLAGE PATTERN,

. WIND RESISTANT POPLIN,

. NYLON/COTTON BLEND,

. 04 April 2012.

Class 8 Standard sample for Cloth, Universal Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 8 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3877 and is applicable for Shade, Appearance, Colorfastness and IR Spectral Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

SHADE:DESERT SAND SHADE:URBAN GRAY SHADE:FOLIAGE GREEN SHADE

DECMC 500 DECMC 501 DECMC 502 DECMC

DL* 63.87 DL* 51.22 DL* 42.45 DL*

Da* 2.81 Da* -0.51 Da* -1.82 Da* Db* 11.61 Db* 6.41 Db* 3.49 Db*

DATE: FEB.2005 CERTIFIED BY MELANIE A. KING

CIELAB readings are provided as an informational tool only. The readings provided were taken using American Association Of Textile Chemists and Colorists (AATCC) Evaluation Procedure 6,(D65 /10 degree) unless a smaller aperture is needed for digital prints. It is recommended that suppliers take a reading of the standard shade sample provided by DLA Troop Support with their own Spectrophotometer. Due to different equipment models, different equipment condition, software, and calibration of equipment, readings taken by the ESA may differ from contractor readings, these readings are only one piece of information and are provided for information purposes only. Matching CIELAB readings as provided may or may not produce an acceptable match to the shade standard provided by DLA Troop Support. The CIELAB readings will not be used for shade acceptance evaluation. All shade acceptance evaluation will be based on Government visual shade evaluations only.

12/17/08

Class 11 Standard sample for Cloth, Operational Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 11 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3900 and is applicable for Shade, Appearance, Colorfastness and IR Spectral

Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

Class 14 Standard sample for Cloth, Operational Enduring Freedom Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 11 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3886 and is applicable for Shade, Appearance, Colorfastness and IR Spectral Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

CHANGES TO MIL-DTL-44436B:

Page 17, TABLE X, Dimensional Stability, under "After 5 launderings" add "After 1 laundering".

INTERIM SPECIFICATION CHANGES TO MIL-DTL-44436B, APPLICABLE TO THIS

CONTRACT ONLY:

Paragraph 1.2 Classification.

- Delete all previous names or name changes to Class 9 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) (see 6.4.1)."

- Delete all previous names or name changes to Class 10 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) Water Repellent Treated (Quarpel Type) (see 6.4.1)."

- Delete all previous names or name changes to Class 11 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) - Wrinkle Free Finish"

- Add "Class 12 - Operational Camouflage Pattern (OCP)"

- Add "Class 13 - Operational Camouflage Pattern (OCP) - Water Repellent Treated (Quarpel Type) (see 6.4.1)."

- Add "Class 14 - Operational Camouflage Pattern (OCP) - Wrinkle Free Finish"

Comment Block:

Delete the hyperlink "https://assist.daps.dla.mil/" and replace with "https://assist.dla.mil/."

Paragraph 2.2.1 Specifications. standards, and handbooks.

Delete hyperlink " https://assist.daps.dla.mil/quicksearch/" and replace with "https://assist.dla.mil/"

Paragraph 2.2.2 Other Government documents, drawings, and publications.

Delete office "ATTN: RDNS-WPW-C" and replace with "ATTN: RDNS-SEW-EWC"

Paragraph 2.3 Non-Government publications.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

Delete "AATCC Test Method - 16 Colorfastness to Light" and replace with the following:

"AATCC Test Method - 16.2 Colorfastness to Light: Carbon Arc AATCC Test Method - 16.3 Colorfastness to Light: Xenon"

OTHER PUBLICATIONS

After Sears Roebuck and Co., Sears Fabric Defect Replica Scales

Delete: "(Copies available from Sears Roebuck and Co., "Fabric Defect Replica Kit" Dept 817 (ATTN: FC 554B), 3333 Beverly Road, HG, FC568B, Hoffman Estates, IL 60179. For information call (847-286-8952.)" and replace with the following:

"(Copies available from Sears Roebuck and Co., "Fabric Defect Replica Kit" at SHGS Hong Kong Textile Testing Laboratory, 49/F, Office Tower, Langham Place, 8 Argyle Street, Mongkok, Kowloon, Hong Kong)."

Paragraph 3.5.1.4 Delete title of the paragraph in its entirety And replace with "Class 9, 10 and 11, Operation Enduring Freedom Camouflage Pattern (OEF-CP)."

Add Paragraph 3.5.1.5:

"3.5.1.5 Class 12, 13 and 14 Operational Camouflage Pattern (OCP). The cloth(s) shall be dyed to a ground shade either matching or approximating Dark Cream 559 and then shall be overprinted with the camouflage pattern by roller or screen printing. When the ground shade is dyed to match Dark Cream 559, the remaining colors shall be obtained by subsequent printing using six rollers or screens, as appropriate for the Tan 525, Light Sage 560, Olive 527, Dark Green 528, Brown 529 and Bark Brown 561areas of the pattern. When the ground shade is dyed to approximate Dark Cream 559 all seven colors of the camouflage pattern shall be obtained by subsequent printing using seven rollers or screens to match all seven colors. Resin bonded pigments shall not be used."

Paragraph 3.5.4 TABLE IA. Delete Title of TABLE IA in its entirety and replace with the following:

"TABLE IA. Colorfastness requirements (Class 9, 10, 11, 12, 13 and 14)"

Paragraph 3.5.4 TABLE IA. Row 3 - after "Dark Brown 530" Add "Bark Brown 561"

Paragraph 3.5.4 TABLE IA. Row 4 -after "Olive 527" Add "Dark Cream 559 and Light Sage 560"

Paragraph 3.6 Delete Title of the paragraph in its entirety and Replace with the following:

"Pattern execution (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)."

Paragraph 3.6 Line 6 after "direction." Delete "The pattern repeat of Classes 9 and 10 shall be 25.255 (+1.25, -2.50) inches in the warp direction." And replace with the following:

"The pattern repeat of Classes 9, 10, 11 12, 13 and 14 shall be 25.255 (+1.25, -2.50) inches in the warp direction."

Paragraph 3.6, Line 13 after "2-1-2519" Add the following:

"and Classes 12, 13 and 14 shall match that of drawing 2-1-2592 (see 2.2.2, 6.2 and 6.4)."

Paragraph 3.7.5 Delete the title and paragraph in its entirety and replace with the following:

"Class 9, 10 and 11, Operation Enduring Freedom Camouflage Pattern (OEF- CP). The reflectance values for Class 9, Class 10 and Class 11 cloth(s) shall conform to the requirements listed in Table VI, when tested as specified in 4.4.4."

TABLE VI. Delete "TABLE VI. and all values in its entirety and replace with:

"TABLE VI Spectral reflectance requirements, Class 9, 10 and 11

Wavelength, (nm) Cream 524 - Pale Green 526, Olive - Dark Green 528 and & Tan 525 - 527 and Brown 529 - Dark Brown 530

Min. Max. Min. Max. Min. Max.

600 22 44 12 30 3 11 620 24 45 12 30 3 12 640 24 45 12 32 4 13 660 25 45 12 32 4 14 680 28 45 14 34 4 17 700 28 48 14 36 6 23 720 30 52 16 39 6 23 740 32 55 18 41 10 25 760 36 56 20 43 14 30 780 38 57 22 45 18 35 800 40 57 22 45 21 40 820 44 58 24 46 24 42 840 46 59 26 47 26 43 860 48 60 28 48 28 45"

Add New Paragraph 3.7.6.

"3.7.6 Class 12, 13 and 14 Operational Camouflage Pattern (OCP). The reflectance values for Class 12, Class 13 and Class 14 cloth(s) shall conform to the requirements listed in Table VI.A, when tested as specified in 4.4.4."

Add New TABLE VI.A. "TABLE VI.A Spectral Reflectance requirements Classes 12, 13 and 14 Wavelength, (nm) Dark Cream 559 - Light Sage 560, Olive - Dark Green 528 and & Tan 525 - 527 and Brown 529 - Bark Brown 561

Min. Max. Min. Max. Min. Max.

600 22 44 12 30 3 11 620 24 45 12 30 3 12 640 24 45 12 32 4 13 660 25 45 12 32 4 14 680 28 45 14 34 4 17 700 28 48 14 36 6 23 720 30 52 16 39 6 23 740 32 55 18 41 10 25 760 36 56 20 43 14 30 780 38 57 22 45 18 35 800 40 57 22 45 21 40 820 44 58 24 46 24 42 840 46 59 26 47 26 43 860 48 60 28 48 28 45"

Paragraph 3.8 TABLE VII. Physical requirements Delete Row 1 in its entirety and replace with the following :

Characteristic Class Class Class 1, 3, 5, 6, 9 &12 2, 7, 10 & 13 8 ,11 &14

Paragraph 3.8.1 Weave. Line three (3) delete miss spelled word "forth" and replace with "fourth"

Paragraph 3.9 Finish. Delete all after the word "printed" on line two

(2) in their entirety and replace with the following:

"The Class 2, 7, 10 and 13 cloth(s) shall be given a water repellent treatment as specified in 3.9.1. The Class 8, 11 and 14 cloth(s) shall be given a wrinkle free finish as specified in 3.9.2."

Paragraph 3.9.1 Delete the paragraph in its entirety and replace with the following:

"3.9.1 Water repellency (Class 2, 7, 10 and 13). The Class 2, 7, 10 & 13 cloth(s) shall be given a fluorocarbon (Quarpel Type) water repellent treatment and meet the requirements of Table VIII when tested as specified in 4.4.4."

"TABLE VIII. Delete Title of the Table in its entirety and replace with the following:

"TABLE VIII. Water repellency (Class 2, 7, 10 and 13)"

Paragraph 3.9.2 Delete the paragraph in its entirety and replace with the following:

"3.9.2 Wrinkle free finish (Classes 8, 11 and 14). The Class 8, Class 11 and Class 14 cloth(s) shall be given a wrinkle free finish treatment to match the "hand" crispness, fabric appearance and smoothness of the guide sample provided."

Paragraph 3.11 Resistance to organic liquid. Delete paragraph in its entirety and Replace with the following:

"3.11 Resistance to organic liquid. The Class 2, 7, 10 and 13 finished cloth(s) shall show no wetting by n-tetradecane, initially and after 15 launderings when tested as specified in 4.4.4."

Paragraph 4.3 Conformance inspection. Delete line 2 after "applicable."

And replace with the following "Sampling for Classes 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 shall be in accordance with 4.4.2"

Paragraph 4.4 Yard by yard examination. Line 1 Delete line in its entirety and replace with the following:

"Each roll for Class 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 in the sample shall be examined yard by yard on the printed side only"

TABLE IX Defects.

Delete Row 5 in its entirety and replace with:

"Pattern design not equal to the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 6 in its entirety and replace with:

"Incorrect color in any part of the pattern (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 7 in its entirety and replace with:

"Pattern repeat not equal to the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 11 in its entirety and replace with:

"Pattern repeat less than 22.755 inches or more than 26.505 inches (Classes 9, 10, 11, 12, 13 and 14)"

Delete Row 12 in its entirety and replace with:

"Skitteriness (mottled, uneven color) of pattern exceeds that shown by the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 16 in its entirety and replace with:

"Overall application of water repellent not uniform (Classes 2, 7, 10 and 13)"

Delete Row 17 in its entirety and replace with:

"Tackiness (sticky to touch) (Classes 2, 7, 10 and 13)"

Paragraph 4.4.2 Shade and appearance examination. Line 4 after "lot."

Delete "The shade and appearance examination sampling procedure for Classes 1-3 and 5-10 shall be followed as written below unless otherwise stated in the contract or solicitation."

And replace with the following:

"The shade and appearance examination sampling procedure for Classes 1-3 and 5-14 shall be followed as written below unless otherwise stated in the contract or solicitation."

TABLE X. End item tests - Continued Row for Colorfastness, Column 3 (test), Row for Light Delete "AATCC-16 Opt 1 or 3" and replace with "AATCC 16.2 or 16.3"

Row for Spectral reflectance, Column 1 (Characteristic), Add the following lines after "Class 6, 7 and 8" Class 9, 10 and 11 3.75 4.5.3 Class 12, 13 and 14 3.7.6 4.5.3

Row for Fabric Appearance/Smoothness: Column 1 (Characteristic), Delete "(Class 8)" and replace with "(Class 8, 11 and 14)"

Row for Water repellent treatment, Column 1 (Characteristic), Delete "(Class 2, 7 and 10)" and replace with "(Class 2, 7, 10 and 13)"

Row for Resistance to organic liquids, Column 1 (Characteristic), Delete "(Class 2, 7 and 10)" and replace with "(Class 2, 7, 10 and 13)"

TABLE X. End item tests. Footnote 9/, Line 4: After "ASTM D" Delete "6183" and replace with "6193"

Paragraph 4.5.2.1 Delete Paragraph in its entirety and replace with the following:

"4.5.2.1 Operation Enduring Freedom Camouflage pattern (OEF-CP) (Class 9, 10, and 11). All colorfastness testing for Operation Enduring Freedom Camouflage pattern (OEF-CP) (Class 9, 10 and 11) shall be performed on the solid color area and not the tonal area."

Add New Paragraph "4.5.2.2 Operational Camouflage Pattern (OCP) (Class 12, 13 and 14). All Colorfastness testing for Operational Camouflage Pattern (OCP) (Class 12, 13 and 14) shall be performed on the solid color area and not the tonal area."

Paragraph 4.5.3 Spectral reflectance test.

Line 1 Delete 1st sentence in its entirety and replace the following:

"Spectral reflectance data shall be obtained from 600 to 860 nanometers

(nm) for Classes 1, 2, 5, 6, 7, 8, 9 10, 11, 12, 13 and 14, and 700 to 860 nanometers (nm) for Class 3 at 20 nm intervals on a spectrophotometer relative to the barium sulfate standard, the preferred white standard."

Line 16 After "standard." Delete "The cloth for Classes 6, 7, 8, 9 and 10 shall be measured as a single layer backed with four layers of the same shade." And replace with the following:

"The cloth for Classes 6, 7, 8, 9, 10, 11, 12, 13 and 14 shall be measured as a single layer backed with four layers of the same shade."

Line 22 after "nanometers." Delete "The diameter for standard aperture size used in the color measurement device shall be 1.0 to 1.25 inches for Classes 1, 2, 3 and 5, and 0.3725 inches or larger for the Classes 6, 7, 8, 9 and 10." And replace with the following:

"The diameter for standard aperture size used in the color measurement device shall be 1.0 to 1.25 inches for Classes 1, 2, 3 and 5, and 0.3725 inches or larger for the Classes 6, 7, 8, 9, 10. 11, 12, 13 and 14."

Paragraph 6.1 Intended use. Delete Paragraph in its entirety and replace with the following:

"6.1 Intended use. The cloth is intended for use in Classes 1, 2, 3, 5, 6, 7, 8, 9, 10 11, 12, 13 and 14 camouflage pattern or solid colored (Black) clothing which are wind resistant, and depending on the Class are water repellent and wrinkle free."

Paragraph 6.4.1 Delete in its entirety and replace with the following:

"6.4.1 Operation Enduring Freedom Camouflage Pattern (OEF-CP). For information on obtaining Operation Enduring Freedom Camouflage Pattern (OEF-CP) approved screens address the contracting activity issuing the invitation for bids or request for proposal".

Paragraph 6.8 Subject Term (keyword) listing.

After "Operation Enduring Freedom" add "Camouflage Pattern (OEF-CP)" Delete "OCP" and replace with "Operational Camouflage Pattern (OCP)"

NOTE: Delete the hyperlink https://assist.daps.dla.mil/. And replace with "https://assist.dla.mil/.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER

TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE

STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE STANDARD PRACTICE