SOW Weld Positioner.docx

Statement of Work Universal Balance Weld Positioner For 846th Test Squadron In Support of Welding Shop TGTOHW

1.0 PURPOSE

The 846th Test Squadron Welding Shop TGTOHW located in Building 1178, Holloman AFB, NM, is in need of a Welding Positioner capable of handling up to a 2000lb weldment. The positioner must be a universal balance design with a caster base and friction brakes.

2.0 SCOPE

The Contractor shall provide a Universal Balance Welding Positioner that meets the following requirements:

2.1.1 Operational Requirements:

2.1.1 Universal balance with a capacity of up to 2000 pounds.

2.1.2 Tilt and Rotational axis will be 360 degrees, manually operated and have an adjustable brake with pin locks.

2.1.3 Mobile caster base will have 2 each 6”x2” ridged casters and 2 each 6”x2” swivel caters with manual floor locks.

2.1.4 Work plate shall be a minimum of 8” diameter with 4, ½” bolt holes on a 5” bolt center.

2.1.5 Must have 1,200 amp ground current conduction capacity.

2.1.6 Machine work table for attaching awkward weldments to maintain an efficient down-hand welding position.

2.1.7 Chassis base will be adjustable height from 27” to 33”.

2.1.2 Hardware

2.1.3 Operator’s manual.

2.2.2 Maintenance manual.

3.0 MILESTONES

The Welding Positioner shall be delivered by 1 Oct 2021.

4.0 DELIVERABLES

4.1 Deliver a Welding Positioner that meets the minimum requirements listed in section 2.0.

5.0 GENERAL CONSIDERATIONS

5.1 PERIOD OF PERFORMANCE

This is a short term project the period of performance shall be approximately 60 days from Authority to Proceed (ATP).

5.2 GOVERNMENT FURNISHED EQUIPMENT (GFE)

The Government will not provide any equipment in support of contractor efforts.

5.3 PLACE OF PERFORMANCE

The Welding Positioner shall be fabricated at the contractor facilities and delivered to Building 1178 Room 206, Holloman AFB, NM 88330.

5.4 CONTRACTOR IDENTIFICATION

Contractor personnel must identify themselves as contractors during meetings, telephone conversations, in electronic messages or correspondence related to this contract.

5.5 CONTRACTOR FURNISHED ITEMS AND SERVICES

The contractor shall furnish all personnel, equipment, tools, materials, supervision, and other items and non-personal services, necessary to perform the work defined in this SOW.

6.0 CONTRACT ADMINISTRATION:

6.1 HOURS OF OPERATION

The Government’s regular hours of operation are between the hours of 7:30 AM to 4:00 PM Monday through Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government-directed facility closings.

-0-