SOW - Vickers Valves.docx

SCOPE OF WORK PR 71292194 / W16H1F0363003O

1. The contractor shall inspect the valves and provide a list of task to be performed, materials by part number to be replaced, and associated cost proposal.

2. The contractor shall provide an exterior inspection looking for damage and leaking.

3. Servo valve are disassembled and pre-testing of key components like control and power wiring, current/flow, coil independence, motor, and ball weld, etc. parts required for repair as recorded.

4. All new seals & filters ultrasonically are replaced every time.

5. The motors are calibrated every time.

6. All new parts will be provided, unless written approval is granted on a case by case basis.

7 Provide a quote and work to be performed to the Contract Specialist. The cost for repair cannot exceed 70% of the cost of a new valve ($4,036.00).

8 Servo valve is cleaned and all required parts are installed 9 Test each servo valve to OEM specifications.

10 After the valve has passed the testing procedure, package with a service report, test report, Certificate of Conformance, and a one (1) year Warranty of parts and labor. Servo Valve is to be electro statically packaged and returned.

11 Additional valves may be required to be repaired. No more than four (4) sets will be required for repair.

12 Repairs are classified into four specific pre-priced repairs. Contractor shall provide pricing for each category.

GENERAL REPAIR VICKERS SERVO VALVES ______

TORQUE MOTOR REPAIR ______

MAJOR TORQUE MOTOR ______

RESPOOL REPAIR ______

13 Evaluation for low offer will be based on four (4) respool repairs.