SOW Hydraulic Cylinder Repair_11 Aug 2021.pdf

Statement of Work

AF 01D00146 Hydraulic Cylinder Repair For

846th Test Squadron

1.0 PURPOSE

The 704th Test Group (704 TG) mission is to be the premier provider of unique test and evaluation capabilities relevant to tomorrow’s warfighter through world-class people improving technical excellence, cost-effectiveness, and agility. The 846th Test Squadron (846 TS) is one of the units assigned to the 704 TG. The 846 TS’s primary test capability is the Holloman High Speed Test Track (HHSTT) where they utilize rocket powered sled trains to simulate flight like environments and scenarios with the control and recovery of a ground based system. The 846 TS, Holloman High Speed Test Track (HHSTT) requires a hydraulic cylinder repair for a 60 ton crane. The crane is used by 846 TS, to move heavy items during the preparation and testing of sleds. The current cylinder will not hold pressure during lifting allowing item to drop that is out of tolerance for this piece of equipment.

2.0 SCOPE

The Contractor shall repair the following components for the 846 TS’s 60 ton crane hydraulic cylinder:

2.1 Dissemble and fix cylinder head as appropriate.

2.2 Clean and inspect barrel of cylinder.

2.3 Inspect barrel and rod for nicks or imperfections to see if honing is needed for repair.

2.4 Replace holding valves.

2.5 Clean cylinder and reassemble cylinder with new seal kit and new style head.

2.6 Ensure that Cylinder Head and Barrel are repaired and ready for installation.

2.7 Pass safety inspection by ensuring bleed off does not exceed parameters.

3.0 MILESTONES

The contractor shall deliver all hardware no later than 30 days ARO.

4.0 DELIVERABLES

The contractor shall deliver all hardware and documentation to 704 TSS/XPL, Attn: Brad Thomas at 1644 Vandergrift Road, Building 1260, Holloman Air Force Base, New Mexico 88330-7850.

5.0 CONTRACT ADMINISTRATION:

The Government’s regular hours of operation are alternating work weeks between the hours of 6:30 AM to 4:00 PM Monday through Thursday and 6:30 AM to 4:00 PM Monday through Thursday/Friday 6:30 AM to 3:00 PM, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government-directed facility closings.