SOW.pdf

Statement of Work A. Background

The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets.

All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy reviews to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Mfr. one-year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Units (over $5,000) shall have an IUID Label applied per DFAR 252.211-7003.

4. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) provided with each unit. .

The contractor shall provide the following equipment without substitutions:

1) P/N 3665-1-1 Tire Gauge Calibrator QTY 88 To include the following without substitutions:

a. Operating Medium: Dry Nitrogen or clean, Dry Air

b. Pressures:

a) Inlet (maximum): 3,000 psig

b) Test Circuit (maximum): 1,000 psig

c. Reference Standard Gauges: Accuracy ±¼% of Full Scale

d. Low-Range Gauge: 0 to 200 psig

e. High-Range Gauge: 0 to 606 psig

f. Regulated Pressure Gauge Range: 0 to 1,000 psig

g. Supply Pressure Gauge Range: 0 to 1,000 psig

h. Plenum Chamber:

a) Volume: 172 Cubic inches

b) Rated Pressure: 2215 psig

i. Power Requirements:

a) Input Voltage: 115-volts 60-Hz ac

b) Current Drain: 3 amperes

j. Dimensions & Weight: 22”L x 19”W x 19.5”H 56 lbs.

2) P/N 3712-20-10000 Master Gauge Qty 5

To include the following without substitutions:

a. Test Fluid: D-2 Ethylhexyl Sebacate or other hydraulic oil, distilled water, isopropyl alcohol, and various calibration fluids.

b. Temperature range:

a) Operating: +5° to +50° C

b) Storage: -40° to +72° C

c. Humidity (operating): 0 to 95% RH, from 5°C to +50°CHand Pump Assembly:

a) Discharge Pressure: 0 to 10,000 psig

b) Reservoir Capacity: 75 cubic inches

c) Piston displacement:

High Volume: 0.196 cubic inches per stroke Low Volume: 0.022 cubic inches per stroke

d) Manifold ports, Qty. 2: Quick-Disconnect fittings, female

d. Adapter Kit Assembly:

a) Quantity of adapters: 6

b) End Configuration: 1/8” FPT, ¼” FPT; 3/8” FPT; 7/16 -20 UNF female thread, per

AN 10050-4; 7/16” -20 UNF male thread, per AN 10056-4

c) Disconnects for D-H ref. standard: 2

e. High Pressure Test Hoses (qty.2):

a) Pressure Rating:

b) Operating: 10,000 psig

c) Proof: 15,000 psig

d) Burst (minimum): 40,000 psig

e) Material: Braided stainless steel

f. Case Dimensions & Weight (including accessories):

a) 26”W x 10”H x 10”D

b) 27.5 lbs.

C. Deliverables

Delivery of the equipment to the following address:

COMMANDER

NAVAIR Calibration Standards MCAS, Attn: Lou Cerrillo (UIC N48535) BLDG 612, Bay 9 Beaufort, SC 29904-5002

D. Delivery Date

Delivery to be:

ITEM 3665-1-1: 11/month commencing 150 days ADC.

ITEM 3712-20-10000: 150 Days ADC.

***PARTIAL SHIPMENT ACCECPTED***

E. Invoicing

All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.