SOW Boom Service.pdf
PDF 21 KB Posted
- Attached to
- Boom Inspection
- Solicitation number
- FA4626-20-Q-0029
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QandA Sheet.pdf | ||
| COMBO - Revised.pdf | ||
| COMBO.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
1. Description of Services
1.1 Provide services as outlined. Here to the customer is known as the 341st Missile Wing (US Government) and the contractor providing service is known as the vender.
1.2 Customer will provide transportation of vehicle(s) to and from vender’s service location.
2. Provided Service:
2.1 Vender will accomplish full boom disassembly to allow for a thorough inspection for two (2) Maintenance Squadron National Cranes 1100 Series (Registration #s 03D00255 and 11D00080).
Cables and Wear Pads will be replaced. Boom will be reassembled, lubed and Load Tested at end of repair. Any other repairs noted (if needed) will be quoted before proceeding.
2.2 Vender will accomplish full boom disassembly to allow for a thorough inspection for a total of four (4) each 583rd MMXS (Rivet MILE) cranes consisting of three (3) each National Cranes 1100 Series (Registration #s 08D00449, 08D01023 and 08D01024) and one (1) each being a ALTEC Crane (Registration # 10D00650). Cables will be replaced for each crane serviced.
Wear pads will be replaced as required. Boom will be inspected, reassembled, lubed and load tested to manufacturers specifications at end of service.
2.3 Any additional service or repairs required above what is listed herein will be accomplished through CLINs 0002 and 0004. Contractor must send a quote for additional repairs to the Contracting Officer as soon as practicable.
2.4 All service; parts and lubrications MUST meet all local, state, federal laws / regulations and applicable American Society of Mechanical Engineers / American National Standards Institute (ASME / ANSI) codes, OSHA standards and manufacturer’s requirements in a manner that shall ensure continuous and safe operation.
2.5 Vender will provide records of any preventative maintenance, inspection / testing, repair, load testing, and certification conducted.
3. Vender will provide a one year warranty for all parts and services provided.
4. Prior to acceptance, the vehicle(s) will be inspected and full function check will be performed by the customer listed below.
File details come from the government source that posted it. Updated .