Solicitation W912BV21Q0012.pdf

SEE ADDENDUM

(No Collect Calls)

W912BV21Q0012 22-Mar-2021

b. TELEPHONE NUMBER

918.669.7657

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 22 Apr 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

C C THAYER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIV

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 E. 81ST STREET

TULSA OK 74137-4290

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

918-669-7436FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$19,500,000

NAICS:

561720

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF72

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BV21Q0012

Section A - Solicitation/Contract Form

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

Read the solicitation in its entirety and all amendments before submitting documents. Payments will be made after receipt of a proper invoice and receipt of acceptable supplies or services. Regular office hours: Monday to Friday, 8:00 a.m. to 4:30 p.m. CST

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, to include audio-visual materials, electronic media, CD’s, thumbdrives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross outs or strike through marks. Submit a legible quote with no correction marks.

EMAIL

Emailed quotes must be received in a supported Adobe or Microsoft Office file format. These formats are the only acceptable methods of submitting a quote electronically. Zip Files, Cloud storage providers, google docs, web-based drop boxes, OneNote/OneDrive, URLs, web-based format, or any other virtual/web-based memory service are NOT acceptable methods of submitting a quote electronically. All documents must be attached in one file.

Reference the solicitation in the subject line. Send quotes to E-mail address CESWT-CT-SS- Quotes@USACE.Army.mil and copy Colleen.Thayer@USACE.Army.mil. Ensure your quote is received before the due date and time. In order for your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received your quote will not be considered.

FAX or MAIL

Include a cover sheet that references the Contract Specialist – Colleen Thayer and the solicitation number. When submitting through mail ensure you clearly mark the envelope to:

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

Colleen Thayer, CECT-SWT-E 2488 East 81st Street

TULSA, OK 74137

FAX: (918) 669-7436

Clearly mark the envelope in the lower left-hand corner with the solicitation number. All pages should be numbered. Use only 8 ½ by 11-inch paper for fax or mail submissions. Do not use foldouts (e.g., 11” x 14” or 11” x 17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Time New Roman or Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder.

Do not use plastic multi-hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Ensure to allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand‐carried, please provide notification to the Contract Specialist at least two working day in advance, (918‐669‐7657) or Colleen.Thayer@USACE.Army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider in your arrival that visitors must go through security check points located on the 16th floor of the small tower. Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District Office. The address of the Tulsa District Office is below:

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 East 81st Street

TULSA, OK 74137-4290

This procurement is being conducted in accordance with Simplified Acquisition Procedures (SAP) of FAR Parts 12 and 13. Any reference to offers or bids or offerors or bidders should be substituted with quotations or quoters. All reference to discussions shall not be interpreted under FAR Part 15, but rather indicate that the Government may communicate with offerors/quoters as allowed under simplified acquisition procedures.

Submit the following documents:

1) Complete a signed copy of the first page of the solicitation and all amendments, including CAGE code/DUNS number.

2) Complete the past performance references page, if included in solicitation.

3) Complete the pricing schedule provided in the solicitation.

4) Product specification.

5) Complete all FAR Clauses, with applicable blanks filled in from SECTIONS I, K, and L. If information is already completed in the System for Awards Management (https://www.sam.gov/) then write “SAM”

6) Your quote must identify the business size of the prime contractor and the business name and address of any subcontractors, if applicable, based on the NAICS code identified. Offerors must clearly identify whether a subcontractor(s) will be performing work, the percentage of work to be performed by each subcontractor, and the socio-economic category into which each identified subcontractor falls. (FAR 52.219-14 LIMITATIONS ON

SUBCONTRACTING (DEVIATION 2019-O0003) (JAN 2019))

7) Updated clause- contractor MUST complete 52.204-24 and 52.204-26 in section K. New requirements stipulate contractors must complete the fill-in section to be responsible for award.

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

For information related to amendments, and the dates set for receipt of proposals, please check https://beta.sam.gov.

Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self‐ register into the system. To self‐register go to the aforementioned web page and click on the BID tab.

Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e‐mail address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continue.

2. From this page, you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e‐mail, followed by an answer to their question after it has been processed.

The Solicitation Number is: W912BV21Q0012

The Bidder Inquiry Key is: YMYC2E-3NUPG5

The Bidder Inquiry System will be unavailable for new inquiries 2:00 PM CST Thursday, 15 April 2021 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

4. Offerors are requested to review the specification in its entirety and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

5. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800‐428‐HELP.

6. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

7. The point of contact for this solicitation is:

Contract Specialist: Colleen Thayer Telephone: 918‐669‐7657 E‐mail: Colleen.Thayer@usace.army.mil

PREPROPOSAL/SITE VISIT CONFERENCE

A Preproposal Conference/Site Visit is scheduled for 10:30 am local time on 08 April 2021 at Pine Creek Lake Office, US Army Corps of Engineers, 175 White Dove Lane, Valliant, OK 74764-9615. The Site Visit will allow prospective Contractors an opportunity to view the site conditions firsthand. A question and answer period will not be conducted. Questions must be posed using Bidder’s Inquiry as per the instructions above.

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

In accordance with AFARS 5132.702(a)(ii)(B): “Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.”

Section B - Supplies or Services and Prices

PRICING SCHEDULE

PRICING SCHEDULE

Pine Creek LAKE, OKLAHOMA

JANITORIAL – Pine Creek LAKE PROJECT OFFICE

Unit Total Description Quantity Unit Price Amount

BASE YEAR: 1 May 2021 – 30 April 2022

0001 JANITORIAL SERVICES 102 Days $__________ $__________

1st OPTION YEAR: 1 May 2022 – 30 April 2023

1001 JANITORIAL SERVICES 102 Days $__________ $__________

2nd OPTION YEAR: 1 May 2023 – 30 April 2024

2001 JANITORIAL SERVICES 102 Days $__________ $__________

3RD OPTION YEAR: 1 May 2024 – 30 April 2025

3001 JANITORIAL SERVICES 104 Days $__________ $__________

4TH OPTION YEAR: 1 May 2025 – 30 April 2026

4001 JANITORIAL SERVICES 103 Days $__________ $__________

52 weeks each year – 2 days per week, Tuesdays and Fridays(Excluding Holidays)

TOTAL FOR BASE AND ALL OPTION YEARS $ ____________

Contractor Name (printed) Signature

Janitorial Services are to be performed at Pine Creek Lake Project Office, Valliant, Oklahoma, in accordance with attached Specifications.

SUB-CONTRACTING INFORMATION:

Self-Performing:

Name of Prime Contractor

Business Size of Prime contractor

Percentage of Work To Be Completed by Prime Contractor

Sub-Contractor (if applicable):

Name of Sub-Contractor

Address

Business Size and Socio-economic Category

Percentage of Work to be

Completed by Sub-Contractor

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

MAINTENANCE CONTRACT

FOR

JANITORIAL WORK

Pine Creek Lake

Valliant, Oklahoma

ORGANIZATION OF SPECIFICATIONS

This specification consists of a general section supplemented by exhibits and appendices. A Table of Contents is provided on the following pages.

The general section contains requirements that apply to all work to be performed under the provisions of this specification. The exhibits contain detailed listings or examples referred to in the general section and the Performance Requirements. The appendices contain a description of the facilities to be serviced and the work to be performed.

Any reference to paragraphs or subparagraphs in this specification will refer to those in the general section unless otherwise noted.

TABLE OF CONTENTS

Para.

No. Paragraph Title 1 Scope of Work 2 Definitions 3 References 4 Initiation, Execution, & Acceptance of Work 5 Personnel 6 Equipment 7 Materials and Supplies 8 Performance Requirements 9 Deductions for Deficient Work 11 Safety 12 Contractor's Facilities 13 Work Schedules 14 Reporting Defective Facilities 15 Building Security 16 Prework Conference 17 Contractor Submittals 18 Billing 19 Antiterrorism and Operations Security Requirements

EXHIBITS

No. Title 1 Quality Assurance Report 2 Specifications for Contractor-Furnished

Materials and Supplies 3 Performance Requirements Table 4 Invoice Format 5 Quality Control Inspection Log

APPENDICES

Appendix Title A Janitorial Work - Project Office/Shop Area

1. SCOPE OF WORK. The work required under this specification provides for the janitorial work at the Pine Creek Lake project office, and contiguous exterior areas.

2. DEFINITIONS.

2.1. Bimonthly. Work required to be performed every other

month.

2.2. Biweekly. Work required to be performed every other week.

2.3. Contractor Quality Control (CQC). The contractor's system of controlling the quality of services provided under the provisions of the contract.

2.4. Deficient Service. Any service provided by the contractor that does not meet the Performance Standards specified in the Performance Requirements given in Exhibit 3.

2.5. Government. The term "Government" as used herein means the United States of America.

2.6. Performance Requirement (PR). The Government's requirement for each service provided under the contract.

Performance Standard (PStd) specifies the minimum standard (quality) for each service provided under the contract.

2.7. Project. The term "project" as used herein means all Government property and easements at Hugo Lake.

2.8. Quality. Conformance with the contract specification. Government determines CQC is functioning effectively.

2.9. Quality Assurance (QA). The procedure by which the Government determines CQC is functioning effectively.

2.10. Regulations. The term "regulations" refers to any local, state, or Federal law or regulation applicable to operation or maintenance of the project.

2.11. Semi-Annually. Work required to be performed 2 times per year.

2.12. Workday. Any day, Monday through Friday, exclusive of Federal holidays. This definition should not be interpreted to mean work is not required by this specification on other days.

3. REFERENCES. Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, current issue) is hereby incorporated into this specification. EM385-1-1 is available on-line at:

http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx.

4. INITIATION, EXECUTION, AND ACCEPTANCE OF WORK.

4.1. Initiation and execution of janitorial work shall be in accordance with this specification.

4.2. Acceptance of janitorial work. The Government shall accept Work unless the Contracting Officer or the Contracting Officer’s Representative (COR) notifies the contractor of deficient services.

4.2.1. Initial notification of deficiencies may be written or oral; however, all oral notification shall be confirmed by the Contracting Officer or COR in writing within two (2) workdays. Written notification shall be provided by completing Parts I, II, and III of a Quality Assurance Report (SWT Form 982, Exhibit 1).

4.2.2. If the Contracting Officer or COR notifies the contractor of deficient work, the contractor shall initiate action to accomplish corrective work. Work performed on a daily schedule shall be reperformed the same day. Work performed on less than a daily schedule shall be reperformed not later than the following day. Refer to paragraph 10 for deficient work not reperformed.

4.2.3. The contractor shall notify the Contracting Officer and COR when deficiencies have been corrected by completing Part IV of the QA Report, provided it has been furnished the contractor. If not, notification shall be made orally. When work has been corrected, the Contracting Officer or COR shall complete Part V of the QA Report and furnish the contractor a copy. A copy will also be provided the Contracting Officer at the Tulsa District Office.

5. PERSONNEL. The contractor shall provide personnel necessary to accomplish all work required by this specification within specified time limits.

5.1. Experience and Skills. The contractor shall provide personnel that are experienced and demonstrate proficiency in the skills required performing the various types of work specified.

5.2. Supervision.

5.2.1. The contractor shall provide one supervisor on the project who shall have full authority to direct any work required. This supervisor and alternates, who shall have full authority to execute work during their absence, shall be designated in writing.

5.2.2. The contractor shall provide the Contracting Officer and COR a telephone number at or through which the supervisor can be reached between 8:00 a.m. and 4:30 p.m. on all days work is being performed. Use of a cellular-type phone is acceptable.

6. EQUIPMENT. The contractor shall furnish equipment necessary to accomplish all work required by this specification within specified time limits. Upon request, the contractor shall present equipment to the Contracting Officer or the COR for inspection.

6.1. All motorized equipment shall be powered by 115 Volts AC.

6.2. All equipment must be in good operating and mechanical condition.

6.3. While performing work under this contract, vehicles shall be operated only by legally licensed drivers and parked only on roads, parking areas, or pullouts unless the COR and the Site/Lake Manager approves use of other areas.

7. MATERIALS AND SUPPLIES.

7.1. Contractor Furnished.

7.1.1. Except for the items listed in subparagraph 7.2., the contractor shall furnish all materials and supplies necessary to accomplish all work required by this specification within specified time limits.

7.1.2. All materials and supplies shall be new and adequate quantities shall be maintained to perform the required services without interruptions. All materials and supplies are subject to review by the Contracting Officer or COR to determine compliance with this specification.

7.1.3. Specifications for selected contractor-furnished materials and supplies are given in Exhibit 2.

7.1.4. In addition to materials and supplies listed in Exhibit 2, the contractor shall furnish the following:

Glass Cleaner Cleaning compounds Disinfectants Mops, brooms, etc.

Spot Remover for carpets & upholstered chairs

7.2. Government Furnished. The Government will furnish potable water.

8. PERFORMANCE REQUIREMENTS. PRs for work performed under this specification are given in Exhibit 3.

The contractor's performance will be evaluated using these PRs as follows:

8.1. Services provided by the contractor will be inspected for compliance with PStds. Those not meeting PStds shall be considered deficient. Major or recurring minor deficiencies will result in a letter of correction being issued by the COR.

8.2. Deficient services are determined during initial QA inspections since the purpose of QA is to determine how well CQC is functioning. The results of inspections are not changed as a result of satisfactory reperformance.

9. CONTRACTOR QUALITY CONTROL. The contractor shall establish and execute a CQC Program in accordance with clause 52.246-4 "Inspection of Services" to assure that all work required by this specification is completed on schedule and in accordance with the PRs in Exhibit 3.

9.1. Results of quality control inspections conducted by the contractor shall be entered on the Quality Control Inspection Log (SWT Form 990, Exhibit 5). Furnish a copy of completed inspection logs to the Contract Officer’s Representative weekly.

9.2. Requirements in 9.1. may be waived by the COR if it is determined proper CQC can be achieved without the required submissions. This determination will normally be made on the basis of actual performance by the contractor and shall be made in writing by the COR. If submissions are again required after being waived this reinstatement shall not be considered as grounds for a price increase.

10. DEDUCTIONS FOR DEFICIENT WORK. Deductions from the contractor's scheduled earnings shall be made for services that do not meet the PStds in Exhibit 3. Deductions for documented defects will be made in accordance with the following procedures:

10.1. Each service found deficient and reperformed by the contractor: No deduction.

10.2. Each service found deficient and performed by the Government: Deduction for loss in value shall be based on the Government's cost for performing the work.

10.3. Each service found deficient and performed by another contractor: Deduction is the contract price paid the other contractor to perform the work.

10.4. Each service found deficient and not reperformed by anyone, or work not performed at all: Deduction for loss in value shall be based on estimates of the contractor's cost for performing the work, i.e., labor, materials, equipment costs, work schedules, etc. Loss in value shall be based on the contract bid price or applicable portion thereof.

11. SAFETY.

11.1. Safety Plan. The contractor shall furnish the Contracting Officer and COR a safety plan to implement the general policies and procedures for safe operation and maintenance of the project in accordance with EM 385-1-1.

The safety plan shall include, but not be limited to the following:

11.1.1. Procedures for training employees in responsibilities for safety of others, including the general public.

11.1.2. Requirements for wearing or utilizing personal safety equipment and apparel.

11.1.3. Procedures for handling, reporting, and correcting unsafe conditions, practices, and safety violations.

11.1.4. Procedures for treating and transporting injured persons to medical facilities.

11.2. Safety Violations. If a contractor's employee persists in not following the safety requirements of this specification or the contractor's safety plan, the employee shall be permanently discharged upon the written request of the Contracting Officer.

11.3. Personal Clothing and Safety Apparel. Contractor personnel shall wear clothing suitable for the weather and working conditions. The minimum shall be short-sleeve shirt and long trousers (no sleeveless shirts or tank tops, or shorts). Clothing shall be in good repair. Personnel will wear additional protective apparel when required by Section 5, EM 385-1-1.

11.4. Accident Reports.

11.4.1. The contractor shall immediately notify the Contracting Officer and COR of all known accidents that occur at the project and result in death or serious injury.

11.4.2. The contractor shall investigate all accidents involving contractor or subcontractor employees that result in death, traumatic injury, occupational disease, or damage to property, materials, supplies and equipment incidental to work performed under this specification. The results of investigations shall be reported to the Contracting Officer and COR immediately, and in writing on ENG Form 3394, Accident Investigation Report, within one (1) workday following the accident.

11.5. Exposure Reports. The contractor shall maintain an accurate record of exposure data (man-hours worked) and submit the figure in writing monthly by the 1st of the following month.

12. CONTRACTOR'S FACILITIES. A closet is available at the project office for storage of janitorial supplies and equipment.

13. WORK SCHEDULES. The contractor shall furnish the Contracting Officer and COR a schedule for performing all janitorial work that is required at a weekly frequency or less. A revised schedule shall be furnished the Contracting Officer and COR prior to the contractor changing their mode of operation.

14. REPORTING DEFECTIVE FACILITIES. While performing work, contractor personnel shall observe the condition of Government facilities. Damaged, defective, and/or inoperative facilities shall be reported to the COR or Site Manager each workday.

15. BUILDING SECURITY. The names of contractor personnel authorized to perform work under this contract shall be furnished the Contracting Officer and COR. Only those persons whose name appears on this list shall be allowed access to buildings. When Government personnel are not present while work is being performed, contractor personnel shall keep buildings locked and refuse entrance to anyone who does not have a key to the buildings.

Contractor personnel will be instructed by the COR in the operation of intruder alarm systems and will be responsible for correct operation of these devices when work is performed, and Government personnel are not present.

16. PREWORK CONFERENCE. The Contracting Officer or COR shall conduct a Prework Conference with the contractor to discuss the provisions of this specification and the contractor's submittals listed in paragraph 17 below.

As a minimum, the officer of the company that signed the contract and the on-site supervisor shall represent the contractor. The Contracting Officer or COR shall establish the location, date, and time of the Prework Conference after consultation with the contractor.

17. CONTRACTOR SUBMITTALS. Unless otherwise noted, the contractor shall submit the documents listed below to the Contracting Officer and/or COR prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer and COR. If the Contracting Officer and COR determine any of the submittals do not comply with this specification, the contractor shall resubmit these documents within one (1) week.

17.1. Names of supervisor and alternate (submit prior to initiation of work and prior to changing designated employees) (subparagraph 5.2.1.).

17.2. Safety Plan (subparagraph 11.1.).

17.3. Exposure reports (submit by 1st of each month) (subparagraph 11.5.).

17.4. Work schedules (submit prior to initiation of work and prior to changing schedules) (paragraph 13.).

17.5. AT/OPSEC Training form provided prior to initiation of work and prior to any employee entering the facility (paragraph 20)

17.6. Background check initiated with the Tulsa District Security Officer (subparagraph 20.2.)

18. BILLING.

18.1. The contractor shall submit the original and two copies of invoices at the end of each month for all completed work.

18.2. Invoices shall be prepared in the format shown at

Exhibit 4.

18.3. All exposure reports shall be submitted before an invoice will be accepted.

18.4. Invoices and supporting documents shall be delivered or mailed to the Contracting Officer’s Representative, Hugo Lake Office, P.O. Box 99, Sawyer, OK 74756.

EXHIBIT 1

QUALITY ASSURANCE REPORT

EXHIBIT 2

SPECIFICATIONS FOR CONTRACTOR-FURNISHED

MATERIALS AND SUPPLIES

ITEM APPENDIX SPECIFICATION

HAND SOAP A LIQUID, ANTIBACTERIAL, EQUAL TO DIAL

OR SOFTSOAP IN A STAND-UP BOTTLE.

REFUSE CONTAINER LINER A PLASTIC, 8 TO 32 GALLON.

TISSUE PAPER A 2-PLY BATH TISSUE, NON-BLEACHED,

NATURAL, SEPTIC TANK SAFE, MINIMUM

OF 500 SHEETS PER ROLL.

TOWELS A PAPER, ROLLS, EQUAL TO BOUNTY OR

BRAWNY.

URINAL DEODORANT CAKE A PERFUMED, SEPTIC TANK SAFE.

EXHIBIT 3

PERFORMANCE REQUIREMENTS

SERVICE REQUIREMENTS

PR

NO.

PERFORMANCE STANDARDS

APPENDIX A

Dust furniture, etc. 1 All surfaces free of dust.

Clean floors 2 Clean. No litter, mop strands, streaks, swirl marks, or detergent residue left on floors. No splash marks on furniture, walls, & baseboards.

Buff floors 3 Entire floor has a uniform, glossy appearance. No scuffmarks or visible wax buildup. Baseboards, furniture, etc., shall be free of cleaning and waxing solutions.

Vacuum carpets 4 Clean.

Clean mirrors & glass (other than windows)

5 Clean, no streaks.

Clean restrooms 6 Odor-free. All fixtures, walls, & floors clean. Lavatories, urinals, commodes, & floors sanitary. Soap, towels, & toilet tissue adequate until next cleaning day.

Clean drinking fountains 7 Clean, sanitary.

Grounds keeping 8 Grounds, parking areas, & sidewalks free of refuse & debris.

Refuse collection 9 Containers empty. Liners clean & not torn.

Refuse disposal 10 Refuse deposited in dumpsters. No refuse left outside dumpsters.

EXHIBIT 4

INVOICE FORMAT

BILLING FOR

MAINTENANCE CONTRACT

PROJECT: ______________________________ SHEET ___ OF ___

CONTRACTOR: ___________________________ DATE: __________

ADDRESS: _________________________ CONTRACT NO: W912BV-__-_-___

BILLING PERIOD: _______ THRU _______ INVOICE NO: _________

PAYMENT TERMS: ____________________________

(Payment Discount or N/A)

BID ITEM NO. AMOUNT

PAYMENT REQUESTED: ____________

CONTRACTOR (Signature/Date)

APPENDIX A

JANITORIAL WORK - PROJECT OFFICE/SHOP AREA

1. FACILITIES TO BE SERVICED. The facilities to be serviced under the provisions of this appendix consist of the project office and contiguous exterior areas. An inventory of these areas is given in Table A.

2. FREQUENCIES AND TIMES OF SERVICES. Services required shall be performed on Tuesdays and Fridays, excluding Federal holidays. All work shall be accomplished between 8:00 a.m. and 3:30 p.m.

3. DESCRIPTION AND FREQUENCY OF WORK. The contractor shall perform the following work:

3.1. Interior Areas (Excluding Restrooms). Each cleaning day. Empty trash receptacles; clean sinks and counter tops; clean drinking fountains; vacuum carpeted floors; and clean tile floors. Wet mopping shall be performed if necessary, to remove dirt. Spot remover shall be used to remove new spills from carpeted floors. Electronic equipment, computers, typewriters, radio, and copy machine shall not be cleaned. However, work areas around the specified equipment shall be cleaned.

3.1.2. Biweekly. Dust office furniture, windowsills, and pictures. Clean exterior surfaces of refrigerator.

The glass on entry doors shall be cleaned.

3.1.3. Monthly. Clean vent covers and light fixtures. Dust ceiling fans and venetian blinds.

3.2. Restrooms. Each cleaning day. Clean mirrors and plumbing fixtures, a disinfectant shall be used to eliminate odor and minimize health hazards. Deodorant cakes shall be maintained in urinals. Empty trash receptacles. Soap, paper towels, and toilet tissue dispensers shall be checked and filled if necessary. Wet mop floors. Excess water shall be removed from floors.

3.2.1. Biweekly. Dust windowsills.

3.2.2. Monthly. Clean vent covers. Dust venetian blinds. Clean light fixtures.

3.3. Interior Work and Storage Areas. Each cleaning day. Empty trash receptacles. Sweep or dust mop floors, wet mopping shall be performed if necessary, to remove dirt.

3.4. Exterior Areas. Each cleaning day trash and debris shall be picked up. Sidewalks shall be swept clean. The contractor shall remove all refuse from refuse containers. Plastic liners shall be maintained in each refuse container.

3.4.1. Bimonthly. Outside refuse containers shall be rinsed and sanitized.

4. PERFORMANCE REQUIREMENTS. The work performed under this appendix shall comply with the PRs in Exhibit 3. The terms clean, sanitary, and odor-free facilities are used in Exhibit 3 and are defined as follows.

4.1. Clean. The contractor shall vacuum, sweep, wash, wipe, or brush facilities to ensure that dirt, dust, rocks, debris, trash, garbage, fecal matter, urine, soap scum, biological formations and resultant stains, insects, insect nests and webs, and residue from cleaning agents are removed.

4.2. Sanitary. The contractor shall disinfect facilities each time they are cleaned.

4.3. Odor-free. The contractor shall use a chemical agent in a manner that will eliminate odor from facilities.

TABLE A

INVENTORY OF FACILITIES

LAKE OFFICE BUILDING SIZE

Interior Heated Areas with Carpet Floors 1375 SF Restrooms with Ceramic Tile Floors 128 SF Interior Heated Areas with Ceramic Tile Floors 418 SF Shop Area Restroom with Ceramic Tile Floors 20 SF

Square footage is an estimate. It is strongly recommended that all bidders view the project office and shop area before bidding.

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-1 Contractor Inspection Requirements APR 1984

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

52.242-15 Stop-Work Order AUG 1989

Section G - Contract Administration Data

252.201-7000 Contracting Officer's Representative DEC 1991 252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

Section H - Special Contract Requirements

WAGE DETERMINATIONS

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5333 Daniel W. Simms Division of | Revision No.: 14 Director Wage Determinations| Date Of Last Revision: 12/21/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Oklahoma

Area: Oklahoma Counties of Choctaw Haskell Latimer McCurtain Pittsburg Pushmataha

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.19 01012 - Accounting Clerk II 16.57 01013 - Accounting Clerk III 18.54 01020 - Administrative Assistant 19.10 01035 - Court Reporter 19.66 01041 - Customer Service Representative I 11.13 01042 - Customer Service Representative II 12.51 01043 - Customer Service Representative III 13.65 01051 - Data Entry Operator I 14.97 01052 - Data Entry Operator II 16.33 01060 - Dispatcher Motor Vehicle 21.55 01070 - Document Preparation Clerk 12.66 01090 - Duplicating Machine Operator 12.66 01111 - General Clerk I 11.94 01112 - General Clerk II 13.03 01113 - General Clerk III 16.83 01120 - Housing Referral Assistant 17.38 01141 - Messenger Courier 12.89 01191 - Order Clerk I 13.01 01192 - Order Clerk II 15.17 01261 - Personnel Assistant (Employment) I 15.33 01262 - Personnel Assistant (Employment) II 17.15 01263 - Personnel Assistant (Employment) III 19.12 01270 - Production Control Clerk 21.74 01290 - Rental Clerk 14.52 01300 - Scheduler Maintenance 13.93 01311 - Secretary I 13.93 01312 - Secretary II 15.59 01313 - Secretary III 17.38 01320 - Service Order Dispatcher 19.26

01410 - Supply Technician 19.10 01420 - Survey Worker 15.08 01460 - Switchboard Operator/Receptionist 13.16 01531 - Travel Clerk I 12.83 01532 - Travel Clerk II 13.68 01533 - Travel Clerk III 14.28 01611 - Word Processor I 12.41 01612 - Word Processor II 13.93 01613 - Word Processor III 15.59 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.27 05010 - Automotive Electrician 18.19 05040 - Automotive Glass Installer 17.24 05070 - Automotive Worker 17.24 05110 - Mobile Equipment Servicer 15.14 05130 - Motor Equipment Metal Mechanic 19.15 05160 - Motor Equipment Metal Worker 17.24 05190 - Motor Vehicle Mechanic 17.91 05220 - Motor Vehicle Mechanic Helper 13.98 05250 - Motor Vehicle Upholstery Worker 16.08 05280 - Motor Vehicle Wrecker 17.19 05310 - Painter Automotive 18.22 05340 - Radiator Repair Specialist 17.24 05370 - Tire Repairer 13.78 05400 - Transmission Repair Specialist 19.15 07000 - Food Preparation And Service Occupations 07010 - Baker 11.29 07041 - Cook I 9.79 07042 - Cook II 11.11 07070 - Dishwasher 9.25 07130 - Food Service Worker 9.59 07210 - Meat Cutter 12.68 07260 - Waiter/Waitress 8.84 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.54 09040 - Furniture Handler 11.67 09080 - Furniture Refinisher 16.54 09090 - Furniture Refinisher Helper 13.06 09110 - Furniture Repairer Minor 14.73 09130 - Upholsterer 16.54 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.52 11060 - Elevator Operator 11.13 11090 - Gardener 14.12 11122 - Housekeeping Aide 11.13 11150 - Janitor 11.13 11210 - Laborer Grounds Maintenance 11.38 11240 - Maid or Houseman 9.66 11260 - Pruner 10.52 11270 - Tractor Operator 13.16 11330 - Trail Maintenance Worker 11.38 11360 - Window Cleaner 12.04 12000 - Health Occupations 12010 - Ambulance Driver 15.25 12011 - Breath Alcohol Technician 17.53 12012 - Certified Occupational Therapist Assistant 29.72 12015 - Certified Physical Therapist Assistant 32.48 12020 - Dental Assistant 17.79 12025 - Dental Hygienist 37.34 12030 - EKG Technician 24.60 12035 - Electroneurodiagnostic Technologist 24.60 12040 - Emergency Medical Technician 15.25 12071 - Licensed Practical Nurse I 15.66 12072 - Licensed Practical Nurse II 17.53 12073 - Licensed Practical Nurse III 19.53 12100 - Medical Assistant 13.92 12130 - Medical Laboratory Technician 18.84 12160 - Medical Record Clerk 13.67 12190 - Medical Record Technician 15.30 12195 - Medical Transcriptionist 15.66

12210 - Nuclear Medicine Technologist 38.50 12221 - Nursing Assistant I 11.47 12222 - Nursing Assistant II 12.90 12223 - Nursing Assistant III 14.07 12224 - Nursing Assistant IV 15.79 12235 - Optical Dispenser 14.54 12236 - Optical Technician 15.66 12250 - Pharmacy Technician 15.24 12280 - Phlebotomist 13.85 12305 - Radiologic Technologist 24.01 12311 - Registered Nurse I 23.85 12312 - Registered Nurse II 29.18 12313 - Registered Nurse II Specialist 29.18 12314 - Registered Nurse III 35.30 12315 - Registered Nurse III Anesthetist 35.30 12316 - Registered Nurse IV 42.31 12317 - Scheduler (Drug and Alcohol Testing) 21.71 12320 - Substance Abuse Treatment Counselor 20.15 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.95 13012 - Exhibits Specialist II 22.25 13013 - Exhibits Specialist III 27.23 13041 - Illustrator I 18.95 13042 - Illustrator II 22.25 13043 - Illustrator III 27.23 13047 - Librarian 20.68 13050 - Library Aide/Clerk 11.89 13054 - Library Information Technology Systems 19.12 Administrator 13058 - Library Technician 13.77 13061 - Media Specialist I 13.50 13062 - Media Specialist II 15.11 13063 - Media Specialist III 16.84 13071 - Photographer I 15.06 13072 - Photographer II 17.50 13073 - Photographer III 20.54 13074 - Photographer IV 25.14 13075 - Photographer V 30.42 13090 - Technical Order Library Clerk 16.47 13110 - Video Teleconference Technician 15.24 14000 - Information Technology Occupations 14041 - Computer Operator I 14.95 14042 - Computer Operator II 16.73 14043 - Computer Operator III 23.75 14044 - Computer Operator IV 27.62 14045 - Computer Operator V 30.38 14071 - Computer Programmer I (see 1) 22.27 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.18 14160 - Personal Computer Support Technician 28.80 14170 - System Support Specialist 28.27 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.53 15020 - Aircrew Training Devices Instructor (Rated) 35.72 15030 - Air Crew Training Devices Instructor (Pilot) 42.81 15050 - Computer Based Training Specialist / Instructor 29.53 15060 - Educational Technologist 28.58 15070 - Flight Instructor (Pilot) 42.81 15080 - Graphic Artist 19.06 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.81 15086 - Maintenance Test Pilot Rotary Wing 42.81 15088 - Non-Maintenance Test/Co-Pilot 42.81 15090 - Technical Instructor 18.16 15095 - Technical Instructor/Course Developer 22.74 15110 - Test Proctor 14.65

15120 - Tutor 14.65 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.61 16030 - Counter Attendant 9.61 16040 - Dry Cleaner 12.25 16070 - Finisher Flatwork Machine 9.61 16090 - Presser Hand 9.61 16110 - Presser Machine Drycleaning 9.61 16130 - Presser Machine Shirts 9.61 16160 - Presser Machine Wearing Apparel Laundry 9.61 16190 - Sewing Machine Operator 13.13 16220 - Tailor 14.01 16250 - Washer Machine 10.52 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.71 19040 - Tool And Die Maker 28.72 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.03 21030 - Material Coordinator 21.74 21040 - Material Expediter 21.74 21050 - Material Handling Laborer 14.69 21071 - Order Filler 12.54 21080 - Production Line Worker (Food Processing) 18.03 21110 - Shipping Packer 16.78 21130 - Shipping/Receiving Clerk 16.78 21140 - Store Worker I 14.20 21150 - Stock Clerk 18.20 21210 - Tools And Parts Attendant 18.03 21410 - Warehouse Specialist 18.03 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 23.62 23019 - Aircraft Logs and Records Technician 18.98 23021 - Aircraft Mechanic I 22.50 23022 - Aircraft Mechanic II 23.62 23023 - Aircraft Mechanic III 24.77 23040 - Aircraft Mechanic Helper 16.51 23050 - Aircraft Painter 21.33 23060 - Aircraft Servicer 18.98 23070 - Aircraft Survival Flight Equipment Technician 21.33 23080 - Aircraft Worker 20.13 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 20.13 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 22.50

II

23110 - Appliance Mechanic 22.18 23120 - Bicycle Repairer 18.44 23125 - Cable Splicer 26.99 23130 - Carpenter Maintenance 21.80 23140 - Carpet Layer 20.91 23160 - Electrician Maintenance 26.96 23181 - Electronics Technician Maintenance I 26.12 23182 - Electronics Technician Maintenance II 27.68 23183 - Electronics Technician Maintenance III 29.20 23260 - Fabric Worker 19.73 23290 - Fire Alarm System Mechanic 23.41 23310 - Fire Extinguisher Repairer 18.44 23311 - Fuel Distribution System Mechanic 28.26 23312 - Fuel Distribution System Operator 22.98 23370 - General Maintenance Worker 16.16 23380 - Ground Support Equipment Mechanic 22.50 23381 - Ground Support Equipment Servicer 18.98 23382 - Ground Support Equipment Worker 20.13 23391 - Gunsmith I 18.44 23392 - Gunsmith II 20.91 23393 - Gunsmith III 23.41 23410 - Heating Ventilation And Air-Conditioning 20.63 Mechanic 23411 - Heating Ventilation And Air Contidioning 21.65 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.38

23440 - Heavy Equipment Operator 18.06 23460 - Instrument Mechanic 23.41 23465 - Laboratory/Shelter Mechanic 22.18 23470 - Laborer 14.69 23510 - Locksmith 22.18 23530 - Machinery Maintenance Mechanic 27.42 23550 - Machinist Maintenance 21.07 23580 - Maintenance Trades Helper 14.15 23591 - Metrology Technician I 23.41 23592 - Metrology Technician II 24.58 23593 - Metrology Technician III 25.77 23640 - Millwright 25.86 23710 - Office Appliance Repairer 19.68 23760 - Painter Maintenance 18.21 23790 - Pipefitter Maintenance 21.77 23810 - Plumber Maintenance 20.63 23820 - Pneudraulic Systems Mechanic 23.41 23850 - Rigger 24.94 23870 - Scale Mechanic 20.91 23890 - Sheet-Metal Worker Maintenance 17.41 23910 - Small Engine Mechanic 18.17 23931 - Telecommunications Mechanic I 25.74 23932 - Telecommunications Mechanic II 27.10 23950 - Telephone Lineman 27.01 23960 - Welder Combination Maintenance 18.32 23965 - Well Driller 23.41 23970 - Woodcraft Worker 23.41 23980 - Woodworker 18.44 24000 - Personal Needs Occupations 24550 - Case Manager 14.48 24570 - Child Care Attendant 10.22 24580 - Child Care Center Clerk 13.07 24610 - Chore Aide 9.25 24620 - Family Readiness And Support Services 14.48 Coordinator 24630 - Homemaker 16.29 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.41 25040 - Sewage Plant Operator 17.71 25070 - Stationary Engineer 23.41 25190 - Ventilation Equipment Tender 17.17 25210 - Water Treatment Plant Operator 17.71 27000 - Protective Service Occupations 27004 - Alarm Monitor 13.85 27007 - Baggage Inspector 14.67 27008 - Corrections Officer 15.88 27010 - Court Security Officer 18.38 27030 - Detection Dog Handler 16.42 27040 - Detention Officer 15.88 27070 - Firefighter 21.37 27101 - Guard I 14.67 27102 - Guard II 16.42 27131 - Police Officer I 18.67 27132 - Police Officer II 20.74 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.88 28042 - Carnival Equipment Repairer 12.87 28043 - Carnival Worker 9.15 28210 - Gate Attendant/Gate Tender 14.70 28310 - Lifeguard 11.48 28350 - Park Attendant (Aide) 16.45 28510 - Recreation Aide/Health Facility Attendant 12.00 28515 - Recreation Specialist 18.85 28630 - Sports Official 13.09 28690 - Swimming Pool Operator 17.25 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 25.70 29020 - Hatch Tender 25.70 29030 - Line Handler 25.70 29041 - Stevedore I 24.48

29042 - Stevedore II 27.07 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 17.97 30022 - Archeological Technician II 20.87 30023 - Archeological Technician III 25.85 30030 - Cartographic Technician 25.85 30040 - Civil Engineering Technician 24.94 30051 - Cryogenic Technician I 25.90 30052 - Cryogenic Technician II 28.60 30061 - Drafter/CAD Operator I 17.97 30062 - Drafter/CAD Operator II 20.87 30063 - Drafter/CAD Operator III 23.28 30064 - Drafter/CAD Operator IV 28.64 30081 - Engineering Technician I 17.13 30082 - Engineering Technician II 19.23 30083 - Engineering Technician III 21.51 30084 - Engineering Technician IV 26.65 30085 - Engineering Technician V 32.59 30086 - Engineering Technician VI 39.44 30090 - Environmental Technician 23.38 30095 - Evidence Control Specialist 23.38 30210 - Laboratory Technician 24.86 30221 - Latent Fingerprint Technician I 25.90 30222 - Latent Fingerprint Technician II 28.60 30240 - Mathematical Technician 25.85 30361 - Paralegal/Legal Assistant I 18.26 30362 - Paralegal/Legal Assistant II 21.08 30363 - Paralegal/Legal Assistant III 24.49 30364 - Paralegal/Legal Assistant IV 31.22 30375 - Petroleum Supply Specialist 28.60 30390 - Photo-Optics Technician 25.85 30395 - Radiation Control Technician 28.60 30461 - Technical Writer I 23.78 30462 - Technical Writer II 29.08 30463 - Technical Writer III 35.19 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35 30501 - Weather Forecaster I 28.64 30502 - Weather Forecaster II 34.84 30620 - Weather Observer Combined Upper Air Or (see 2) 23.28 Surface Programs 30621 - Weather Observer Senior (see 2) 25.85 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 11.74 31030 - Bus Driver 15.84 31043 - Driver Courier 15.55 31260 - Parking and Lot Attendant 10.68 31290 - Shuttle Bus Driver 16.71 31310 - Taxi Driver 9.57 31361 - Truckdriver Light 16.71 31362 - Truckdriver Medium 17.87 31363 - Truckdriver Heavy 21.55 31364 - Truckdriver Tractor-Trailer 21.55 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 9.65 99050 - Desk Clerk 10.22 99095 - Embalmer 26.02 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 12.72 99252 - Laboratory Animal Caretaker II 13.52 99260 - Marketing Analyst 22.67 99310 - Mortician 26.02

99410 - Pest Controller 15.54 99510 - Photofinishing Worker 13.32 99710 - Recycling Laborer 14.87 99711 - Recycling Specialist 17.19 99730 - Refuse Collector 13.74 99810 - Sales Clerk…