Solicitation - FA301620Q0032.pdf

502 CONS/JBKAE

JBSA Lackland, TX 78236

F2MTR29352AW01

Containerized Housing Units

Containerized Housing Units Brand Name or Equivalent

(The quote shall be effective 30 days after submission)

Request for Quote: FA301620Q0032

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; quotes are being requested and a separate Request for Proposal (RFP) will not be issued. The solicitation number is FA301620Q0032 and is issued as a Request for Quotation (RFQ). This combined synopsis/solicitation incorporates provisions and clauses are those in effect through Federal Acquisition Circular 2020-04 and DFARS change notice 20200123. This purchase is restricted to Small Business concerns. This NAICS code is 332311 and the size standard is 750 employees. This is a requirement for CAC Enabled Doors as stated below.

Containerized Housing Units

NAICS 332311

(Quotes shall be effective for 30 days)

Please respond to this RFQ by emailing your response to: SSgt Maria Yalung at maria_christina.yalung.1@us.af.mil no later than 12:00PM CDT, 2 April 2020 - Thursday (or sooner if possible) in order to be considered timely. Any and all questions will be due by 12:00PM CDT 26 March 2020 - Thursday. Any quote, modification, revision, or withdrawal of a quote received after the exact time specified in this solicitation shall be determined as late and will not be considered unless received before award is made, the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition, and it was the only quote received. The contractor must submit a spec sheet and picture with their quote!

**Only the three lowest quotes deemed technically acceptable will be considered for evaluation for award** (Please provide a quote for the line items listed below. Failure to quote on all CLINs will render the quote unacceptable and ineligible for award consideration in the absence of discussions.)

Please provide the information below:

Payment Terms ___________________________ Delivery Date _______________________________ Company

Name:

DUNS # Required Cage Code Number:

POC: Telephone #

E-Mail Address: Tax ID#:

Warranty Information:

Do you have the ability to invoice electronically (invoicing through WAWF)?

mailto:lance.watters.1@us.af.mil

502 CONS/JBKAE

JBSA Lackland, TX 78236

Special Notes and Instructions:

1. This is a notice that this order is a total set-aside for small business concerns. Only quotes submitted by small business concerns holding NAICS Code 332311 and the size standard of 750 employees will be accepted by the Government.

2. Basis for Award. 502 CONS/JBKAE will issue a purchase order to the vendor who is determined to offer the best value to the Government. Failure to acknowledge Amendments may result in your quote not being considered for award. Contract type shall be Firm Fixed Price (FFP).

3. Best Value Determination. The Offeror who is deemed responsible and responsive with the Lowest Priced, Technically Acceptable (LPTA) quote will be determined to represent the best value. Technical acceptability will be determined by an evaluation of the quoted requirements that meet the technical criteria that is contained in the solicited item description. Quotes initially will be ranked from lowest to highest based on total cost. The Government will then evaluate the three lowest priced quotes for Technical Acceptability. However, the Government reserves the right to evaluate additional quotes for technical acceptability if deemed to be in the best interest of the Government. If additional quotes are evaluated for technical acceptability, they will be evaluated in the order of total cost. Award will be made to the responsible vendor whose quote is the lowest evaluated price among technically acceptable quotes.

4. Interchanges. The government intends to award a purchase order without interchanges with respective vendors/ quoters. The government however, reserves the right to conduct interchanges if deemed in its best interest. Under appropriate circumstances, interchanges can be an effective method to improve the Government's evaluation of Offerors' quoted approaches and may reduce acquisition cycle time. Interchanges may be written, email, phone call, etc., or any method which would accurately capture the contemporaneous sharing of information between the Government and the Offerors. Interchanges may also be oral conversations between the Government and the Offerors.

5. Mandatory Registrations. To be eligible for award, registration with the System for Award Management (SAM) must be current (legacy for On-line Registration and Certifications Application (ORCA) and Central Contractor Registration (CCR) registrations). To register or update former CCR and Reps & Certs that are not current go to https://www.sam.gov/portal/public/SAM/ and provide mandatory information.

6. Delivery/Assembly. All delivery, assembly and installation will be performed IAW the Statement of Objectives.

See Attachment 1, Statement of Objectives.

7. Site Visit. A site visit will take place on Wednesday, 18 March 2020 at 9:00 am CDT. Please contact SSgt Maria Yalung if you will be attending the site visit no later than Monday, 16 March 2020 at 12:00pm CDT via email: maria_christina.yalung.1@us.af.mil for instructions to the location or located location on www.FBO.gov solicitation posting. If a base pass is needed, provide the following information form your driver's license:

Name:

DOB:

DL #:

State:

F2MTR29352AW01

Containerized Housing Units https://www.sam.gov/portal/public/SAM/

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

Solicitation/Contract Form

FA301620Q0032

Supplies or Services and Prices/Cost

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

0001 Containerized Housing Unit (CHU) Manufacturer's Part Number: Null Product Service Code: 5410 Firm Fixed Price

CIN: 00000000000005098308

10.0 Each

0002 Delivery Manufacturer's Part Number: Null Product Service Code: 5410 Firm Fixed Price

CIN: 00000000000005098309

1.0 Lot

0003 Installation and Connection Manufacturer's Part Number: Null Product Service Code: 9999 Firm Fixed Price

CIN: 00000000000005098310

1.0 Lot

Description/Specifications/Statement of Work

Requirements Containerized Housing Units IAW the Statement of Objective (SOO)

Packaging and Marking

Inspection and Acceptance

0001 Inspection and Acceptance Location

Both Destination Instructions: Resource Advisor: Leticia Thorn, 210-671-4675 leticia.thorn@us.af.mil

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

0002 Inspection and Acceptance Location

Both Destination Instructions: Resource Advisor: Leticia Thorn, 210-671-4675 leticia.thorn@us.af.mil

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

0003 Inspection and Acceptance Location

Both Destination Instructions: Resource Advisor: Leticia Thorn, 210-671-4675 leticia.thorn@us.af.mil

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

Deliveries or Performance

Contractor Destination

0001 Delivery Schedule Ship To Address

Delivery Requested By

30 APR 2020

10.0 Each

Ship To

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

FoB Details

Contractor Destination

0002 Delivery Schedule Ship To Address

Delivery Requested By

30 APR 2020

1.0 Lot

Ship To

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

FoB Details

Contractor Destination

0003 Delivery Schedule Ship To Address

Delivery Requested By

30 APR 2020

1.0 Lot

Ship To

DoDAAC: F2MTR2 Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

F2MTR2 350 BA TS

AF NO MILSBILLS PROC CP 2106710947

950 VOYAGER DR

FoB Details

Contractor Destination

JBSA LACKLAND, TX 78236 5637

United States

OfficeCode:

Andrea Bell Telephone: 210-671-6065 Email: andrea.bell.7@us.af.mil

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.204-7006 Billing Instructions. 2005-10 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. 2018-12 As prescribed in 232.7004(b), use the following clause: WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. Payment request and receiving report are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the Web Based Training link on the WAWF home page at https://wawf.eb.mil/ (e) WAWF methods of document submission.

Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order: (1) Document type. The Contractor shall submit payment requests using the following document type(s): (i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher. (ii) For fixed price line items (A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer. __COMBO__ (Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.) (B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer. __GOVERNMENT__ (Contracting Officer: Insert either Invoice 2in1 or the applicable invoice and receiving report document type(s) for fixed price line items for services.) (iii) For customary progress payments based on costs incurred, submit a progress payment request. (iv) For performance based payments, submit a performance based payment request. (v) For commercial item financing, submit a commercial item financing request. (2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract. (f) [Note: The Contractor may use a WAWF combo document type to create some combinations of invoice and receiving report in one step.] (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* | Field Name in WAWF || Data to be entered in WAWF | | Pay Official DoDAAC || __F87700__ | | Issue By DoDAAC || __FA3016__ | | Admin DoDAAC || __FA3016__ | | Inspect By DoDAAC || __F2MTR2__ | | Ship To Code || __F2MTR2__ | | Ship From Code || __N/A__ | | Mark For Code || __N/A__ | | Service Approver (DoDAAC) || __F2MTR2__ | | Service Acceptor (DoDAAC) || __F2MTR2__ | | Accept at Other DoDAAC || __N/A__ | | LPO DoDAAC || __N/A__ | | DCAA Auditor DoDAAC || __N/A__ | | Other DoDAAC(s) || __N/A__ | (*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert See Schedule or Not applicable.) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).) (4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable. (5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activitys WAWF point of contact. __Ruben Catano, 210-671-6176, ruben.catano@us.af.mil__ (Contracting Officer: Insert applicable information or Not applicable.) (2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed. (End of clause)

Special Contract Requirements

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. 2016-03 As prescribed in 211.274-6(a)(1), use the following clause: ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. Concatenated unique item identifier means (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. Data matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number.

For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency. Governments unit acquisition cost means (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery. Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier. Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http:// www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Governments unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description ____ ____ ____ (ii) Items for which the Governments unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ____ ____ ____ (If items are identified in the Schedule, insert See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology International symbology specification Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall (A) Determine whether to (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Governments unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1) (v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods

(i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ____, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause)

Contract Clauses

ADDENDUM TO 52.212-1

ADDENDUM TO 52.212-1, INSTRUCTIONS TO OFFEROR - COMMERCIAL ITEMS (OCT 2018) The following paragraphs have been deleted:

52.212-1(h), Multiple Awards 52.212-1(i), Availability of Requirements Documents Cited in the Quote

(a) Paragraph 52.212-1(c), Period for Acceptance of Quotes, is tailored as follows: "The offeror agrees to hold the prices in its quote firm for 30 calendar days from the date specified for receipt of quotes."

(b) The following is inserted as new paragraph (m) of the provision:

(m) Quote Preparation Instructions.

A. To assure timely and equitable evaluation of quote, offeror must follow the instructions contained herein. Offerors are required to meet all quote requirements, including terms and conditions, and technical requirements, in addition to those identified as evaluation factors. Offeror must clearly identify any exception to the quote terms and conditions and provide complete accompanying rationale.

B. Specific Instructions:

1. PRICING DATA - Submit 1 electronic copy

(a) Insert proposed unit price(s) and extended amount(s) in the Schedule of Supplies/Services for each line item.

2. SUBMISSION OF QUOTE

(a) Quotes shall be submitted to the Contract Specialist directly by emailing all required documentation to SSgt Maria Yalung, maria_christina.yalung.1@us.af.mil. Secondary Point of Contact for submission: Robert De La Rosa, robert.de_la_rosa@us.af.mil.

3. SUBMISSION OF OFFER

(a) The contractor shall submit drawings, designs and specifications along with furniture drawings and layout of CHUs in accordance with (IAW) ADDENDUM TO 52.212-2 Evaluation - Commercial Items as stated below.

(End of clause)

ADDENDUM TO 52.212-2

ADDENDUM TO 52.212-2 Evaluation - Commercial Items (Oct 2014) The following have been deleted:

(b) Options has been deleted in its entirety (b)(iii) Past Performance has been deleted in its entirety The following have been added or changed

FAR 52.212-2 EVALUATION - COMMERICIAL ITEMS ADDENDUM

Addendum to 52.212-2(a): Paragraph (a) is tailored as follows:

(a) Basis for Award. The Government intends to award one Firm Fixed Price contract for this acquisition. Award will be made to technically acceptable Offerors who are deemed responsible in accordance with FAR 9.104 and whose quote conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, and all other information required by this quote. Unless specifically identified in your quote, by submission of its quote, the Offeror accedes to all solicitation requirements, including terms and conditions, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in a quote being determined ineligible for award. This contract will be awarded as Firm Fixed Price (FFP).

It is the Government's intent to evaluate quotes and award without interchanges with Offerors. Therefore, the Offeror's initial quotes should contain the Offeror's best terms from a price, and technical standpoint. However, the Government reserves the right to conduct interchanges if the Contracting Officer (CO) later determines them to be necessary.

1.0 Evaluation Process. The evaluation factor and process to be used is listed below.

1.1 Evaluation Factors. In evaluating quotes, the Government will select the quote that is most advantageous to the Government. To arrive at a decision, only the three lowest quotes will be assessed in accordance with the following evaluation factors for the award: Technical Acceptability Price

1.1.1 Technical Evaluation. Only the three lowest quotes will be evaluated for Technical Acceptability.

(A) Acceptability Ratings. The evaluation factors listed below will be used to evaluate each quote and will receive one of the following ratings

(i) Acceptable - The quote clearly meets the minimum requirements of the quote as listed in the attached Statement of Objectives (SOO), RFQ Attachment 1 and Specification Layout , RFQ Attachment 2.

(ii) Unacceptable - The quote does not clearly meet the minimum requirements of this quote and its attachments.

1.1.2 Price Evaluation. Evaluations will be completed by multiplying the Offeror's unit price by the estimated quantity. An offeror's proposed TEP will be determined by multiplying the estimated quantities identified in the Schedule of Supplies by the quoted unit price for each Line Item Number (CLIN). The Government may require submission of information other than cost or pricing data to the extent necessary to evaluate price reasonableness.

1.1.2.2 Evaluation of Factors. Offerors are advised that their initial submission should be their best effort. Only technically acceptable quotes, either initially or as a result of interchanges, are eligible for award. If award is made without interchanges, quote revisions will not be permitted. The Government will evaluate the quotes selected above for technical acceptability on an Acceptable/Unacceptable basis. For the technical quote to be rated as "Acceptable", the technical factor must be rated acceptable. If the technical factor is rated "Unacceptable" the overall quote will be rated as "Unacceptable".

(A) Interchanges. Under appropriate circumstances, interchanges can be an effective method to improve the Government's evaluation of Offerors' quoted approaches and may reduce acquisition cycle time. Interchanges may be written, email, phone call, etc., or any method which would accurately capture the contemporaneous sharing of information between the Government and the Offerors. Interchanges may also be oral conversations between the Government and the Offerors.

(B) Factor # 1 - Submit product descriptions for each item being quoted. The offeror shall submit product specifications that match the SOO, Statement of Objectives, Attachment 1 and characteristics outlined in Specifications Layout, Attachment 2.

The standard has been met when: The offeror provides products that fully conform to the product description requirements specified in the SOO.

(End of clause)

FAR Clause Incorporated by Reference 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

FAR Clauses Incorporated by Reference

Number Title Effective Date 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements or Statements-Representation.

2017-01

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01

52.204-13 System for Award Management Maintenance. 2018-10 52.204-23 Prohibition on Contracting for Hardware, Software, and Services

Developed or Provided by Kaspersky Lab and Other Covered Entities.

2018-07

52.212-4 Contract Terms and Conditions-Commercial Items. 2018-10 52.222-40 Notification of Employee Rights Under the National Labor Relations

Act.

2010-12

52.222-50 Combating Trafficking in Persons. 2019-01 52.228-5 Insurance-Work on a Government Installation. 1997-01 52.232-23 Assignment of Claims. 2014-05 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 52.233-1 Disputes. 2014-05 52.233-3 Protest after Award. 1996-08 52.233-4 Applicable Law for Breach of Contract Claim. 2004-10 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. 1984-04 52.237-3 Continuity of Services. 1991-01 52.243-1 Changes-Fixed-Price. 1987-08 52.243-4 Changes. 2007-06 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short

Form).

1984-04

DFARS Clauses Incorporated by Reference

Number Title Effective Date 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09 252.203-7001 Prohibition on Persons Convicted of Fraud or Other Defense-Contract-

Related Felonies.

2008-12

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09 252.204-7003 Control of Government Personnel Work Product. 1992-04 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 2016-05 252.209-7004 Subcontracting with Firms that are Owned or Controlled by the

Government of a Country that is a State Sponsor of Terrorism.

2019-05

252.223-7008 Prohibition of Hexavalent Chromium. 2013-06 252.225-7001 Buy American and Balance of Payments Program. 2017-12 252.225-7002 Qualifying Country Sources as Subcontractors. 2017-12 252.225-7012 Preference for Certain Domestic Commodities. 2017-12

252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. 2011-06 252.225-7048 Export-Controlled Items. 2013-06 252.232-7010 Levies on Contract Payments. 2006-12 252.232-7011 Payments in Support of Emergencies and Contingency Operations. 2013-05 252.243-7001 Pricing of Contract Modifications. 1991-12 252.243-7002 Requests for Equitable Adjustment. 2012-12 252.244-7000 Subcontracts for Commercial Items 2013-06

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items. 2019-10 As prescribed in 12.301(b)(4), insert the following clause: Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Oct2019) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). (3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(Aug 2019) (Section 889(a)(1)(A) of Pub. L. 115-232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (5) 52.233-3, Protest After Award (Aug 1996) (31U.S.C.3553). (6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19U.S.C.3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] __X__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41U.S.C.4704 and 10U.S.C.2402). ____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41U.S.C.3509)). ____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31U.S.C.6101note). ____ (5) [Reserved]. ____ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). ____ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

__X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31U.S.C.6101 note). ____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41U.S.C. 2313). ____ (10) [Reserved]. ____ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15U.S.C.657a). ____ (ii) Alternate I (Nov 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15U.S.C.657a). ____ (ii) Alternate I (Jan 2011) of 52.219-4. ____ (13) [Reserved] __X__ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15U.S.C.644).

____ (ii) Alternate I (Nov 2011). ____ (iii) Alternate II (Nov 2011). ____ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15U.S.C.644). ____ (ii) Alternate I (Oct 1995) of 52.219-7. ____ (iii) Alternate II (Mar 2004) of 52.219-7. __X__ (16) 52.219-8, Utilization of Small Business Concerns (Oct2018) (15U.S.C.637(d)(2) and (3)). ____

(17) (i) 52.219-9, Small Business Subcontracting Plan (Aug2018) (15U.S.C.637(d)(4)) ____ (ii) Alternate I (Nov 2016) of 52.219-9. ____ (iii) Alternate II (Nov 2016) of 52.219-9. ____ (iv) Alternate III (Nov 2016) of 52.219-9. ____ (v) Alternate IV (Aug 2018) of 52.219-9 __X__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15U.S.C.644(r)). __X__ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15U.S.C.637(a)(14)). ____ (20) 52.219-16, Liquidated Damages- Subcontracting Plan (Jan 1999) (15U.S.C.637(d)(4)(F)(i)). ____ (21) 52.219-27, Notice of Service-Disabled Veteran- Owned Small Business Set-Aside (Oct 2019) (15U.S.C.657f). ____ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15U.S.C.632(a)(2)). ____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15U.S.C.637(m)). ____ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec2015) (15U.S.C.637(m)). ____ (25) 52.222-3, Convict Labor (June 2003) (E.O.11755). __X__ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Oct 2019) (E.O.13126).

__X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). ____ (28) (i) 52.222-26, Equal Opportunity (Sept 2016) (E.O.11246). ____ (ii) Alternate I (Feb 1999) of 52.222-26. ____ (29) (i) 52.222-35, Equal Opportunity for Veterans (Oct2015) (38U.S.C.4212). ____ (ii) Alternate I (July 2014) of 52.222-35. ____ (30) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29U.S.C.793). ____ (ii) Alternate I (July 2014) of 52.222-36. __X__ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38U.S.C.4212). ____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). ____ (33) (i) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22U.S.C.chapter78 and E.O. 13627). ____ (ii) Alternate I (Mar 2015) of 52.222-50 (22U.S.C.chapter 78 and E.O.

13627). ____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) ____(35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42U.S.C.6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____(ii) Alternate I (May 2008) of 52.223-9 (42U.S.C.6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) ____(36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693). ____(37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun2016) (E.O. 13693). ____ (38) (i) 52.223-13, Acquisition of EPEAT?-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Oct 2015) of 52.223-13. ____ (39) (i) 52.223-14, Acquisition of EPEAT?-Registered Televisions (Jun2014) (E.O.s 13423 and 13514). ____ (ii) Alternate I (Jun2014) of 52.223-14.

__X__ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42U.S.C.8259b). ____ (41) (i) 52.223-16, Acquisition of EPEAT?-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514). ____

(ii) Alternate I (Jun 2014) of 52.223-16. __X__ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). ____ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693). ____ (44) 52.223-21, Foams (Jun2016) (E.O. 13693). ____ (45) (i) 52.224-3 Privacy Training (Jan2017) (5 U.S.C. 552 a). ____ (ii) Alternate I (Jan 2017) of 52.224-3. ____ (46) 52.225-1, Buy American-Supplies (May 2014) (41U.S.C.chapter83). ____ (47) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014) (41U.S.C.chapter83,19U.S.C.3301 note, 19U.S.C.2112 note, 19U.S.C.3805 note, 19U.S.C.4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. ____ (ii) Alternate I (May 2014) of 52.225-3. ____ (iii) Alternate II (May 2014) of 52.225-3. ____ (iv) Alternate III (May 2014) of 52.225-3. ____ (48) 52.225-5, Trade Agreements (Oct 2019) (19U.S.C.2501, et seq., 19U.S.C.3301 note). __X__ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10U.S.C. 2302Note). ____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42U.S.C.5150). ____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42U.S.C.5150). ____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41U.S.C.4505, 10U.S.C.2307(f)). ____ (54) 52.232-30, Installment Payments for Commercial Items (Jan2017) (41U.S.C.4505, 10U.S.C.2307(f)). __X__ (55) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31U.S.C.3332). ____ (56) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C.3332). __X__ (57) 52.232-36, Payment by Third Party (May 2014) (31U.S.C.3332).