SECTION J ATTACHMENTS.pdf

1 MB Posted

Attached to
COLLAR STUD
Solicitation number
SPMYM226Q73070002
Issued by

About this file

Written by GovTribe AI ·

This document contains Material Ordering Data for welding studs governed by military specification MIL-S-24149C, dated 27 MAR 1989, with Reinstatement Notice 2 (21 AUG 2000) and Amendment 1 (01 DEC 1989). The document specifies ordering requirements for three distinct stud configurations, each with unique dimensions and part numbers. All three line items procure Type II carbon steel studs with solid flux or aluminum flux coated weld-ends, modified to use NiCrMoCb - 625 Inconel material instead of standard carbon steel. The three configurations differ only in length: IDN N4523A-6127-9707 (Dimension 0.375"-16UNC-2A x 3.000"), IDN N4523A-6127-9710 (Dimension 0.375"-16UNC-2A x 3.600"), and IDN N4523A-6128-9708 (Dimension 0.375"-16UNC-2A x 2.397"). All items reference applicable Military Specification Sheet part numbers M24149/1-551 (MOD) or M24149/1-549 (MOD) and are prepared under ICN 38CTB46901 by Huanan Li, Code 290EP.

Common requirements across all three line items include: no first article inspection required, no protective coating or treatment, Level A preservation and packing, and no fire-retardant requirements. The current issue of DODISS (Department of Defense Index of Specifications and Standards) must be cited in solicitation documents. All studs conform to the eight stud type classifications outlined in the specification, with Type II selected for these orders. Inspection conditions remain as specified in the base specification, and no deviations from standard fire-retardant or other special requirements apply.

View the file

Other files

File Type Posted
Solicitation Amendment - SPMYM226Q73070002 COLLAR STUD.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

MATERIAL ORDERING DATA

MIL-S-24149

IDN: N4523A - 6127 - 9707

ICN: 38CTB46901 KO: A10 KOI: 001

Paragraph 6.2 Ordering Data

A. MIL-S-24149C, STUDS, WELDING, AND ARC SHIELDS (FERRULES),

GENERAL SPECIFICATION FOR, dated 27 MAR 1989.

REINSTATEMENT NOTICE 2, dated 21 AUG 2000 INCLUDING AMENDMENT 1, dated 01 DEC 1989.

B. Current issue of DODISS is to be cited in the solicitation (see 2.1.1 and 2.2).

C. Type of stud and arc shield (see 1.2): Type II with material and length alterations. See below

Type I – Carbon steel studs, fluxless weld-end

Type II – Carbon steel studs, solid flux or aluminum flux coated weld-end

Type III – Aluminum alloy studs, bulb weld-end

Type IV – Aluminum alloy studs, cone protection weld-end

Type V – Corrosion-resistant steel studs, solid flux weld-end

Type VI – Carbon steel studs, tipped or pointed weld-end

Type VII – Aluminum alloy studs, tipped or pointed weld-end

Type VIII – Corrosion-resistant steel studs, tipped or pointed weld-end

D. Applicable Military Specification Sheet part numbers: M24149/1-551 (MOD)

E. First article inspection is not required. (see 3.2, 4.3 and 6.4)

F. Type of protective coating or treatment (see 3.6): None

G. If inspection conditions are other than specified (see 4.4.2): N/A

H. Level of preservation and packing requirements (see 5.1): Level A

I. When fire-retardant requirements are required (see 5.1(a)(1)(2): N/A

Additional Data Requirements:

Type II studs with alteration to material (NiCrMoCb - 625 Inconel) and length (3.000 in). Dimension: 0.375"-16UNC-2A x 3.000"

Prepared By: Huanan Li

Code: 290EP

IDN: N4523A - 6127 - 9710

ICN: 38CTB46901 KO: A10 KOI: 004

alterations. See below

Type I – Carbon steel studs, fluxless weld-end

Type II – Carbon steel studs, solid flux or aluminum flux coated weld-end

Type III – Aluminum alloy studs, bulb weld-end

Type IV – Aluminum alloy studs, cone protection weld-end

Type V – Corrosion-resistant steel studs, solid flux weld-end

Type VI – Carbon steel studs, tipped or pointed weld-end

Type VII – Aluminum alloy studs, tipped or pointed weld-end

Type VIII – Corrosion-resistant steel studs, tipped or pointed weld-end

D. Applicable Military Specification Sheet part numbers: M24149/1-551 (MOD)

E. First article inspection is not required. (see 3.2, 4.3 and 6.4)

F. Type of protective coating or treatment (see 3.6): None

G. If inspection conditions are other than specified (see 4.4.2): N/A

(3.600 in). Dimension: 0.375"-16UNC-2A x 3.600"

IDN: N4523A - 6128 - 9708

ICN: 38CTB46901 KO: A10 KOI: 002

alterations. See below

Type I – Carbon steel studs, fluxless weld-end

Type II – Carbon steel studs, solid flux or aluminum flux coated weld-end

Type III – Aluminum alloy studs, bulb weld-end

Type IV – Aluminum alloy studs, cone protection weld-end

Type V – Corrosion-resistant steel studs, solid flux weld-end

Type VI – Carbon steel studs, tipped or pointed weld-end

Type VII – Aluminum alloy studs, tipped or pointed weld-end

Type VIII – Corrosion-resistant steel studs, tipped or pointed weld-end

D. Applicable Military Specification Sheet part numbers: M24149/1-549 (MOD)

E. First article inspection is not required. (see 3.2, 4.3 and 6.4)

F. Type of protective coating or treatment (see 3.6): None

G. If inspection conditions are other than specified (see 4.4.2): N/A

(2.397 in). Dimension: 0.375"-16UNC-2A x 2.397"

61279707 data.pdf
61279710 data.pdf
61289708 data.pdf

File details come from the government source that posted it. Updated .