SATPC0042180 Tab 04 4 SOW.pdf

STATEMENT OF WORK

1. Objective/Requirements

This requirement is for acquisition of digital image correlation hardware and infra-red (IR) add-on software to an existing VIC-3D license (Correlated Solutions, Inc., Digital Image Correlation) for use in the Materials and Structures Laboratories at NASA Langley Research Center. All hardware and software shall be compatible with digital image correlation hardware and software currently in use in the Materials and Structures Laboratories at NASA Langley Research center. Specific requirements are listed below.

2. Characteristics, Scope, and Specs

The contractor shall provide hardware and software with specifications equal to or better than the requirements provided below.

a) VIR IR Addition

i) FLIR IR Camera and Lenses

• One FLIR A700 kit with IR lens, f=17 mm (24°) with macro mode option

• One FLIR A700/400 IR lens, f=70 mm (6°) with case (minimum focus distance - 5m)

• One FLIR A700/400 IR lens, f=29 mm (17°) with case (minimum focus distance -1m)

ii) Digital Image Correlation IR Add-on Software and Accessories

• IR Module Add-on to one existing VIC-Snap license

• Eight Piece IR Calibration Target set with carrying case (1"-18" FOV)

• IR fine-adjustment mount with focusing stage

iii) VIC-3D Accessories

• One VIC-Gimbal Motorized Automatic Calibration System (holds four calibration targets for FOV: 30-110mm) - WiFi disabled

• One VIC-DAQ FT - 6 Channel (10 kS/s per channel (6 channels) +Flexible Triggering options

b) Digital Image Correlation High Temperature Hardware

i) Four (4) Blue 30.5 mm filters (compatible with most Schneider C-mount lenses, with exception for some short focal lengths)

ii) Two High Powered Blue-X Focus LED Lighting Systems

• Supports strobe and continuous lighting

• Fully integrated in VIC-Snap 10

• Polarizing filter included

• Includes extrusion adapter plate and magic arm

• Strobe requires compatible DAQ or trigger box

• Includes two focusing lenses for large or small FOVs

iii) Two year warranty on all non-consumables

c) Blue-Hawk, out-of-the-box simple system for FOV range: 45 mm x 40 mm to 120 mm x 105

mm. - Quantity (2)

i) Two (2) 24.6 megapixel (5320 x 4608 @17 fps) digital cameras (faster fps available at reduced resolution)

ii) Integrated Blue-X lite LED system with strobe (up to 10Hz) or continuous monochrome lighting

iii) Two (2) 60 mm Schneider C-mount Lenses

iv) Trigger cables (BNC) and USB cables (5m)

v) Extrusion and focusing stage

vi) Rigidly mounted carbon fiber stereo system

d) VIC-DAQ FT (10K samplers and triggering) – Quantity (2)

i) One VIC-DAQ - 6 Channel (10 kS/s per channel + flexible triggering)

ii) Camera triggering (camera trigger cables required) and analog data sync

iii) One manual trigger switch

iv) Vibration/fatigue compatible (input sinusoidal signal for flexible triggering: peaks, valleys, number of cycles, user-defined phase, etc.)

v) Compatible with Blue X-Strobe lights (not included, see d-ii)

e) Additional DIC system hardware

i) Two 25 mm Schneider Jade 1.2" lenses to increase FOV range to 352 mm X 295 mm

ii) 8-piece target set

• Compatible with fluorescent and standard DIC

• FOV range 20 mm-250 mm

iii) VIC Gimbal (works with targets 3, 4, 5, or 7 mm spacing; FOV: 25 mm-105 mm)

• Automated calibration with a single click

• Fully integrated in VIC-Snap

iv) Two (2) M30.5 x .5 Blue Filters for application in extreme temperature testing

v) Two (2) M30.5 x .5 Polarizing Filters

vi) Two (2) M30.5 x .5 Fluorescent Filters

3. Place of Performance

Shipping address:

NASA Langley Research Center 4 S Marvin St Hampton, VA , 23681 ATTN: William Johnston

Final location:

NASA Langley Research Center ATTN: William Johnston B1205, Room 114 2 West Reid Street Hampton, VA, US, 23681