SATPC0042050 Tab 07 SOW PRINTED.pdf

This is a Statement of Work (SOW) for the fabrication and delivery of a custom Knudsen Cell Spool Assembly for NASA Glenn Research Center (GRC). The contractor must fabricate, inspect, and deliver one complete assembly in accordance with NASA drawing package DWG. NO. 200201MRA001 through 200201MRA040. The assembly supports NASA's Knudsen Effusion Mass Spectrometry (KEMS) instrumentation and requires high-precision machining, high-temperature compatible materials, and exact dimensional conformity.

The contractor's scope includes manufacturing all components (actuator couplers, weldments, flanges, translation assemblies, rails, rollers, heater stand assemblies, and plates); following all NASA-provided drawings, tolerances, and material specifications without deviation; performing all machining, welding, fabrication, and finishing operations in-house; chemically etching all parts for identification; ensuring compatibility with high-temperature operation and KEMS furnace geometry; and providing 100% inspection of all parts with complete inspection reports. Deliverables include the fully fabricated assembly per NASA drawings, inspection and quality assurance documentation, material certifications, and any deviation or nonconformance reports (subject to NASA approval). The delivery schedule is 24 weeks after receipt of order (ARO), with the contractor required to notify NASA immediately of any schedule risks related to commercial lead times for linear cages, rail rollers, or specialty materials. Acceptance criteria require verification of component conformity to NASA drawings and specifications, receipt and approval of inspection reports, confirmation that all parts are properly etched, finished, and defect-free, and successful fit-check and leaking check with existing KEMS hardware performed by NASA. Delivery is to NASA Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135, Building 106, Room 211.