Salient Characteristics_Redacted.pdf
PDF 332 KB Posted
- Attached to
- One (1) broad beam ion polisher
- Solicitation number
- W911QX24Q0132
About this file
The document provided is a Salient Characteristics Commercial Availability Certification template related to a federal contract opportunity. The template indicates that the Contractor shall provide one (1) broad beam ion polisher with specific technical requirements, including: argon gun(s) as the ion source, ion beam energy range of 100V to 6kV, timed beam on/off intervals, tabletop design, turbo pump vacuum system, cross-section milling and planar milling capabilities with defined sample sizes and movements, and a cryogenic cooling stage with a temperature range of 0 to -100 Celsius. The Contractor shall deliver the product within 270 days after contract award to the U.S. Army Research Laboratory (ARL) at Aberdeen Proving Ground, MD. The related federal contract opportunity is solicitation number W911QX24Q0132, which is a pre-solicitation for the same broad beam ion polisher requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought Notice.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Template last updated 01/8/2019.
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name):
Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
The Contractor shall provide one (1) broad beam ion polisher with the following specifications:
1) Argon gun(s) used as the ion source with mass flow controller.
2) Maximum ion beam energy of six (6) kilovolt (kV) or higher
3) Minimum ion beam energy of 100 volt (V) or less
4) Timed beam on/off intervals
5) Tabletop design
6) Turbo pump for vacuum system
7) Cross-section milling capability.
Maximum sample size of 20 x 12 x 7 millimeter (mm) or greater Sample X- moving range of at least seven (7) mm.
Sample Y-moving range of at least three (3) mm.
Minimum stage swing angle of ±15 degrees (°) Milling rate greater than 500 micrometer/second (µm/s) (measured on
Silicon)
8) Planar milling capability
Maximum sample size of 50 mm diameter x 25 mm height or greater Sample moving range of zero (0) to five (5) mm or greater.
Sample rotation range: maximum of ±90° or greater.
Stage tilt range from 0° – 90° or greater.
9) Cryogenic cooling stage Cooling by liquid nitrogen gas (N2) Cooling temperature range: zero (0) to -100° Celsius (C)
The Contractor shall deliver the product within 270 days after contract award to:
U.S. Army Research Laboratory (ARL) Shipping and Receiving 6375 Johnson Road, Building 321 Aberdeen Proving Ground, MD 21005
File details come from the government source that posted it. Updated .