Salient Characteristics_oscilloscope.doc

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name):

Michael Zellner Technical Point of Contact (TPOC)

The Contractor shall deliver one (1) oscilloscope, in accordance with the below specifications:

1. The oscilloscope must have a bandwidth greater than or equal to 13000000000 hertz (also commonly termed 13 gigahertz (GHz).

2. The oscilloscope must have four (4) independent recording channels.

3. The oscilloscope must have at least one (1) external trigger input.

4. Each of the four (4) independent recording channels must be capable of running with impedance set to 50 ohms.

5. Each of the four (4) independent channels must be capable of recording at a sampling rate greater than 20000000000 samples per second (also commonly termed 20 Gigasamples/s or 20 Gsamp/s or 20 Gs/s).

6. Each of the four (4) independent channels must be capable of recording 20000000 (20M) samples @ 20 Gigasamples/second or greater.

7. The four (4) independent channels must have SubMiniature version A connectors (SMA connectors) or adapters to SMA.

8. The oscilloscope must have an external display so it can run as a standalone entity.

9. The oscilloscope must be able to interface with a computer to be controlled remotely.

10. The oscilloscope must have an Ethernet interface.

11. The oscilloscope must have a Universial Serial Bus (USB) interface.

12. The oscilloscope must be capable to mount in a standard 19” laboratory rack.

13. The oscilloscope must come with the hardware to mount in a 19” laboratory rack.

14. The oscilloscope must come with the power supply and all accessories so as to be run upon receiving.

15. The oscilloscope must run on standard 110 volt alternating current power (110V ac).

The Contractor shall deliver two (2) oscilloscopes, in accordance with the below specifications:

1. The oscilloscope must have a bandwidth greater than or equal to 1000000000 hertz (also commonly termed 1 gigahertz (GHz)).

2. The oscilloscope must have four (4) independent recording channels.

3. The oscilloscope must have at least one (1) external trigger input.

4. Each of the four (4) independent recording channels must be capable of running with impedance set to 50 ohms or 1000000 ohms (1 MOhm).

5. Each of the four (4) independent channels must be capable of recording at a sampling rate greater than 2500000000 samples per second (also commonly termed 2.5 Gigasamples/s or 2.5 gigasamples per second or 2.5 Gs/s).

6. The oscilloscope must have an external display so it can run as a standalone entity.

7. The oscilloscope must be able to interface with a computer to be controlled remotely.

8. The oscilloscope must have an Ethernet interface.

9. The oscilloscope must have a Universial Serial Bus (USB) interface.

10. The oscilloscope must be capable to mount in a standard 19” laboratory rack.

11. The oscilloscope must come with the hardware to mount in a 19” laboratory rack.

12. The oscilloscope must come with the power supply and all accessories so as to be run upon receiving.

13. The oscilloscope must run on standard 110 volt alternating current power (110V ac).

Contracting Officer:

Template last updated 07/28/2016