Salient Characteristics_KO Approved.docx

SIGNAL GENERATOR

SALIENT CHARACTERISTICS

1. GOVERNMENT NEEDS: Four each Rohde and Schwartz SGS100A signal generators are required.

2. DESCRIPTION: Four each Rohde and Schwartz SGS100A signal generators with the following features will be provided:

- Low SSB phase noise of 133 dBc (meas., 20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)

- Wideband noise of < -145 dBc

- Nonharmonics of < 76 dBc (> 10 kHz carrier offset, f ≤ 1500 MHz)

- Very high level accuracy and repeatability

The following options will be provided:

- SGS-B106 – Frequency range: 1 MHz to 6 GHz, CW only

- SGS-B1 – Reference oscillator OXCO

- SGS-B26 – Electronic step attenuator

- SGS-K90 – Phase coherent input and output

- ACAGS100A – R&S accredited calibration

- ZZA-KN20 – 19” adapter BW2010 cabinet 1 HU ½, combination instrument with instrument of same size, side by side

3. WARRANTY: A minimum 12 month warranty will be provided.

4. PRESERVATION, PACKAGING AND DELIVERY: The contractor shall utilize standard commercial methods for preservation and packaging appropriate for the provided equipment and acceptable to commercial carriers. As a minimum, all areas susceptible to damage from exposure to the elements shall be preserved and/or packed to prevent damage. The contractor shall be responsible for ensuring the equipment is delivered to LEAD in good condition.

5. INSPECTION AND ACCEPTANCE: The provided equipment shall be examined for design, construction, materials, components, and workmanship to determine compliance with the contract and this specification. Any deviation from these requirements shall be cause for rejection.