SALIENT CHARACTERISTICS.pdf
PDF 332 KB Posted
- Attached to
- VENTAIR
- Solicitation number
- SPMYM225Q1640
About this file
This document is a Salient Characteristics specification for two Ventilation Blowers dated May 1, 2025, associated with a Defense Logistics Agency solicitation. The specification requires Ventair TM-8 blowers with specific technical requirements: 460V/3 Phase/60 Hz operation, 15 HP motor, Class One/Div 1 rating, silver powder-coated sheet metal components suitable for marine environments, and capability to operate in hazardous locations.
The document mandates stringent safety certification requirements, requiring each blower to comply with OSHA regulations (CFR Title 29, Part 1910) and be inspected by a Nationally Recognized Testing Laboratory (NRTL). Vendors must provide two hard copies of operation/maintenance manuals with detailed mechanical and electrical schematics, a "no asbestos used" statement, and a list of recommended spare parts. NRTL certification documentation or stickers must be submitted, with the option that if both blowers are identical, only one needs direct NRTL inspection.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM225Q1640U0003 Ventair_ amendment3.pdf | ||
| REV 2 SALIENT CHARACTERISTICS.pdf | ||
| SPMYM225Q1640U0002 Ventair_ amendment2.pdf | ||
| SPMYM225Q1640 Ventair.pdf | ||
| CDRL_Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for a Ventilation Blower (Qty 2)
May 1, 2025
1. VENTILATION BLOWER REQUIREMENTS:
a. Ventair TM-8 460V / 3 Phase / 60 Hz / TE 15 HP Motor or equal
b. “Each” unit shall include the following minimum (or equal) features:
i. Class One/ Div 1 rated (including electrical motor)
ii. Operate on 460 VAC power
iii. 15 HP electrical motor
iv. Sheet metal components are silver powder coated suitable for use in marine environment
v. Motor Frame, standard configuration
vi. Capable to operate in a Hazardous location
2. NRTL Safety Certification Requirements – Each Ventilation Blower and its component parts shall be in compliance with applicable Code of Federal Regulations (CFR) Title 29, Part 1910. By definition, any equipment will be deemed acceptable and approved by TRF, Bangor, if it meets specific Occupational Safety and Health Administration (OSHA) conditions outlined in CFR Title 29, Part 1910; Subparts "O" and "S". Specifically, equipment will be "Accepted" by TRF, Bangor, if it has been inspected and found by a Nationally Recognized Testing Laboratory (NRTL) to conform to specified plans or procedures of applicable codes. The equipment (as a whole system) shall be Nationally Recognized Testing Laboratory (NRTL) inspected and certified (by an OSHA authorized third party). If both blowers are identical, only one blower needs to be NRTL inspected, and the NRTL certification shall apply to both blowers. Two
(2) “hard” copies (one for each blower) of the NRTL certification report shall be provided. If the equipment type/model as already been NRTL inspected and certified, a certification report, (two (2) ”hard” copies (one for each blower) or sticker documentation mounted on the equipment, (which acknowledges it is NRTL certified), shall be provided.
3. TECHNICAL DATA TO BE PROVIDED:
a. Operator / Maintenance / Repair Manuals - The equipment shall be furnished with two (2) hard copies (total for both ventilation motor) of the manufacturer’s standard Operation, Maintenance, and Repair Manual(s), bound in durable three ring binder(s). The manuals shall include all mechanical and electrical schematics showing discrete components/block diagrams/wiring diagrams with inputs and outputs identified/system electrical interface documents and drawings for the specific model of all machine equipment/drives/controls supplied. The information contained in the manual(s) shall reflect the unit and its components in the “as built” configuration.
The information contained in the manual(s) shall be adequate to permit trouble shooting and repair of the equipment by journeymen level personnel. The information contained in the manual(s) shall be in the English language. The information contained in the manual(s) shall be in imperial units of measure. The vendor shall provide a “no asbestos used” statement, certifying that all products/materials (i.e. gaskets, etc.) used in the components of the equipment does not contain asbestos. The contractor shall provide a list of recommended consumable spare parts and possible sources for procurement.
b. NRTL Certification Documentation/Stickers - As outline in paragraph 2.
File details come from the government source that posted it. Updated .