Salient_Characteristics.docx

Salient Characteristics

· Operating weight with canopy not to exceed 6500 lbs.

· Enclosed Cab

· Heating & Air Conditioning

· Cloth Seat

· Bluetooth Capable Stereo

· Hydraulic Clamp with Thumb

· Long Arm

· Bucket

· Bucket Pivot Angle of 185 degrees

· Rubber Tracks

· Zero turn

· 7” Digital Operator Control Panel

· Ground Clearances: Upper structure to groundline 21.2 in, center of machine to groundline 11.5 in, groundline to top of engine cover 60.6 in.

· 6-way slew blade

· Overall Height (top of canopy/cab) 96.0 in.

· Total hydraulic pump capacity shall be capable of providing no less than 24.9 GPM

· Auxiliary quick couplers shall be flush faced couplers and mounted on the end of the boom.

· Hydraulic system shutdown shall be provided as standard equipment and shall monitor hydraulic oil temperature and hydrostatic charge pressure.

· Each track shall be independently driven by a hydrostatic axial piston motor.

· Excavator shall have a 3 cylinder, liquid-cooled, diesel producing no less than:

24.8 hp (18.5 kW) at 2550 RPM rated engine speed.

· Automatic glow plugs (cold start assist) shall be standard equipment.

· Excavator direction, steering, and travel speed shall be controlled by two hand or foot levers. - Thumb buttons control auxiliary hydraulics and boom swing

· Blade control shall be a separate lever with float function

· Excavator boom, arm, bucket and slew functions shall be controlled by two joysticks.

· High and Low travel speed shall be controlled by a push button on the blade lever

· Excavator Functions shall be selectable between ISO and Standard controls.

· Engine speed control shall be a rotary dial with auto-idle feature.

· Excavator auxiliary function shall be controlled by switches on right-hand joystick.

· Service brake (Travel) shall be a hydraulic lock on the motor.

· Parking brake (Travel) shall be a hydraulic lock on the motor.

· Service brake (Slew) shall be a hydraulic lock on the motor.

· Holding brake (Slew) shall be an automatically applied slew brake integrated in motor.

· Engine starting and shutdown functions shall be controlled electrically with a key switch or optional keyless start keypad.

· Keyless controller with programmable code to start engine

· Digital readout of machine hours

· Temperature and Fuel Gage