Salient Characteristics.doc
DOC document 77 KB Posted
- Attached to
- Hydrogen Purifier
- Solicitation number
- W911QX23Q0101
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combination Synopsis-Solicitation for Commercial Purchases (Under SAT).docx | DOCX document | |
| Provisions and Clause Full-Text Attachment (for Combo Synopsis-Solictation).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
The Contractor shall provide one (1) Hydrogen Gas Palladium-based Purifier with the following minimum characteristics:
1. Palladium membrane purifier for hydrogen; unlimited lifetime – no regeneration required
2. Minimum Inlet (feed gas) hydrogen purity of 99.99 percent (%)
3. Minimum Outlet (purified gas) purity 99.9999999% hydrogen
4. Typical pure hydrogen flow rate of 20 standard liter per minute (slpm) at outlet pressure of 80 pounds per square inch gauge (psig) and inlet pressure of 180 psig
5. Maximum bleed rate of 1.1 slpm (feed gas) hydrogen
6. Automatic nitrogen purge for cell protection
7. Outlet check valve to prevent back diffusion
8. Boost bleed valve for quick purging of 3-5x normal bleed rate
9. Z-purge of electrical cabinet
10. Feed gas, purified gas, bleed gas outlet, and nitrogen purge inlet are all male Vacuum Coupling Radiation (VCR) metal-to-metal seal fittings
11. Closed loop cell temperature control
12. High/Low Cell temperature alarms
13. Maximum volume of 4100 cubic inches
14. Programmable logic controller (PLC) controlled shutdown and startup
15. 120 volts alternating current (VAC) operation.
The Contractor shall deliver one (1) Hydrogen Gas Palladium-based Purifier with the above characteristics with Free on Board (FOB) Destination to the following address no later than 30 November 2023.
US ARMY RESEARCH LABORATORY
SHIPPING & RECEIVING
2800 POWDER MILL RD
ADELPHI MD 20783-1138
Signature (typed name): A. Glen Birdwell Technical Point of Contact (TPOC) or Contracting Officer’s Representative (COR)
Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .