RSI025487_Contract_V6.pdf

STATE OF OHIO

DEPARTMENT OF ADMINISTRATIVE SERVICES

GENERAL SERVICES DIVISION

OFFICE OF PROCUREMENT SERVICES

4200 SURFACE ROAD, COLUMBUS, OH 43228-1395

MANDATORY USE CONTRACT FOR: New, Model Year 2025 or Newer, Sport Utility Vehicles, Cargo Vans, and Trucks;

Alternative Fuel Vehicles (SUVs and Midsize Trucks)

CONTRACT No.: RSI025487

CONTRACT ID: CTR025487-A5

EFFECTIVE DATES: 12/20/24 to 09/30/25 *Renewal through 9/30/26

SUPPLIER: Tim Lally Chevrolet

The Department of Administrative Services has accepted bids submitted in response to Invitation to Bid No.

SRC0000022772. The evaluation of the bid response(s) has been completed. The bidder(s) listed herein have been determined to be the lowest responsive and responsible bidder(s) and have been awarded a contract for the items(s) listed. The respective bid response, including the Instructions to Bidders and Standard Terms and Conditions, special contract terms & conditions, any bid addenda, specifications, pricing schedules and any attachments incorporated by reference and accepted by DAS become a part of this Requirements Contract.

This Requirements Contract is effective beginning and ending on the dates noted above unless, prior to the expiration date, the Contract is renewed, terminated or cancelled in accordance with the Contract Terms and Conditions.

CONTRACT RENEWAL. This Contract may be renewed after the ending date of the Contract solely at the discretion of the Contracting Agency for a period of one month. Any further renewals will be by mutual agreement between the Contractor and the Contracting Agency for any number of times and for any period of time. The cumulative time of all mutual renewals may not exceed 09/30/2027 unless the Contracting Agency determines that additional renewal is necessary.

This Requirements Contract is available to all State Agencies, State institutions of higher education and properly registered members of the Cooperative Purchasing Program of the Department of Administrative Services, as applicable.

Agencies are eligible to make purchases of the listed supplies and/or services in any amount and at any time as determined by the agency. The State makes no representation or guarantee that agencies will purchase the volume of supplies and/or services as advertised in the Invitation to Bid.

This Requirements Contract and any Amendments thereto are available from the Ohio|Buys public portal at the following address:

https://supplier-emarketplace.ohio.gov/page.aspx/en/usr/login?ReturnUrl=%2fpage.aspx%2fen%2fbuy%2fhomepage

*Contract renewed through 9/30/26 https://supplier-emarketplace.ohio.gov/page.aspx/en/usr/login?ReturnUrl=%2fpage.aspx%2fen%2fbuy%2fhomepage

IN WITNESS WHEREOF, the parties have executed this Contract as of the dates below;

For TIM LALLY CHEVROLET:

Signed:

Jamie Onion, Fleet Manager

For the OHIO DEPARTMENT OF ADMINISTRATIVE SERVICES:

Signed:

Kathleen C. Madden, Director

1 - SPECIFICATIONS AND REQUIREMENTS

1.1 - SCOPE

These specifications define the State’s requirements for new, never titled, model year 2025 or newer sports utility vehicles (SUVS), trucks and cargo vans; included are alternative fuel SUVs and midsize trucks. These specifications are to be utilized by state agencies in the operation of state government. This includes political subdivisions that are members of the Department of Administrative Services, Office of Procurement Services Cooperative Purchasing Program.

Vehicle shall be the latest current model, complete with all standard equipment, unless otherwise specified. Any item which is standard equipment on the vehicle being bid, but not listed below, must not be removed from the vehicle. Manufacturer’s disclaimers indicate changes in product specifications may occur during the model year and they reserve the right to do so without repercussion. All current mandatory Department of Transportation safety requirements are to be furnished, including seat belts and shoulder harness.

The State may permit updates to model year and model year pricing for the same make/model upon manufacturer build out of the awarded model year (refer to Section 3.3 of this document for model year and model year pricing updates).

1.2 - CLASSIFICATION

Due to the life cycle of vehicles, usage data will change from year to year. The State makes no representation or guarantee as to the actual number of vehicles that will be purchased by participating agencies. The estimates listed below are based upon 2024 vehicle purchases and projections for 2025.

*Item Number

Estimated # of Units Item Description

14AT 5 Pickup Full Size 2WD, Regular Cab, Long Bed, 6,100# GVWR 15AT 0 Pickup Full Size 4WD, Regular Cab, Long Bed, 6,300# GVWR 16AT 20 Pickup Full Size 2WD, Extended Cab, Short Bed, 6,200# GVWR 17AT 30 Pickup Full Size 4WD, Extended Cab, Short Bed, 6,400# GVWR 18AT 13 Pickup – Full Size – 6,200# GVWR – 2WD – Crew Cab – Short Bed 19AT 23 Pickup – Full Size – 6,400# GVWR – 4WD – Crew Cab – Short Bed 28AT 5 Pickup – Full Size – 9,900# GVWR – 2WD – Extended Cab, Long Bed - SRW 29AT 5 Pickup – Full Size – 9,900# GVWR – 4WD – Extended Cab, Long Bed - SRW 32AT 0 C & C – Full Size – 12,800# GVWR – 2WD – Regular Cab- DRW 37AT 0 C & C – Full Size – 12,800# GVWR – 4WD – Crew Cab- DRW

NOTE: Political subdivision purchases are not included in the figures shown above. The evaluation is based upon these State usage figures. This Contract will be available to political subdivisions in addition to the State usage projections above. Political subdivision purchases may represent a significant increase to the estimated purchase quantity.

For items with an Estimated Usage of 0, a value of 1 will be used for evaluation purposes.

*Indicates removal of Item 1AT from the contract, per Amendment 1.

1.3 - APPLICABLE DOCUMENTS

A. Ohio Revised Code Section 125

B. Ohio Revised Code Chapters 4501, 4503, 4513, and 4517

C. Federal Motor Vehicle Safety Standards (FMVSS)

D. Society of Automotive Engineers (SAE) Automotive Technical Standards

E. Occupational Safety & Health Administration (OSHA) Regulations

F. U.S. Environmental Protection Agency (EPA) Laws & Regulations

G. Model Year 2025 or Manufacturer’s most current Model EPA Fuel Economy Guide

1.4 - REQUIREMENTS

In addition to the State of Ohio sport utility vehicle, cargo van, and truck specifications, the following items of factory-installed equipment shall be required as standard equipment on each vehicle listed in this bid, unless otherwise noted. Optional equipment required to be furnished on the units is noted on the State’s specifications. Options listed herein are to be factory installed except for any item(s) not available from the factory.

1.4.1 - REQUIRED STANDARD EQUIPMENT

The following is required standard equipment:

A. Four Speed Automatic Transmission (unless otherwise noted)

B. Outside Rearview Mirrors, Left and Right, Low Mount with break-a-way mirror head feature (unless otherwise specified, manufacturers largest standard manually operated left and right mirrors to be bid).

C. Inside Rearview Mirrors

D. Spare Wheel and Tire (of same manufacturer style and tread design as Original Equipment) with manufacturers standard spare tire mounting location, unless otherwise specified. Tire and wheels shall be conventional full size, if available. All tires to be radial unless otherwise stated. A tire mending kit can also be used as an alternative where noted.

E. Bumpers: Front and Rear, manufacturer’s standard, with the rear bumper to be a step bumper on all pickup trucks with factory beds or utility body.

F. Standard heater and defroster

G. Heavy duty radiator to include radiator overflow tank

H. Dual armrests

I. Dual visors

J. Dual airbags http://codes.ohio.gov/orc/125 http://codes.ohio.gov/orc/4501 http://codes.ohio.gov/orc/4503 http://codes.ohio.gov/orc/4513 http://codes.ohio.gov/orc/4517

K. Gauges on instrument panel, as standard for model being bid

L. 12V power point

M. Lug wrench and tire jack

N. Second row bench seat required on utility vehicles and crew cab trucks unless otherwise specified. Shall be manufacturer’s standard seating.

O. Passenger seat required on each van. Second row bench seat required on crew cab trucks unless otherwise specified. Shall be manufacturer’s standard seating.

P. Manufacturer’s standard floor covering. Floor covering in cargo vans to include load area.

Q. All wiring provided is to be properly sized and installed in accordance with the manufacturer’s recommendations. All wiring is to be adequately protected from cargo in the load space.

R. Rust Proofing: Each vehicle listed in this bid shall have the manufacturer’s standard corrosion protection system. A copy of the corrosion protection warranty is to be returned with the bid, certifying compliance to this requirement.

Bidder to provide this information via the Questionnaire.

NOTE: Failure to provide this warranty may result in disqualification of the bid.

S. Radio Suppression: Each vehicle listed in this bid shall have the manufacturer’s standard radio suppression system.

T. Key FOBS: Two sets of keys with FOBS enabling electronic keyless entry will be included with the delivery of the vehicle.

U. Restraint System and Supplemental Restraint Systems: Restraint Systems refers to lap and shoulder seat belts and Supplemental Restraint Systems refer to air bag systems.

V. Tires: Shall be as recommended by the manufacturer for the vehicle specified, and shall be premium quality of recognized manufacturer, steel belted radials (all season tread; unless otherwise specified).

W. All vehicles to be delivered ready to use, fully charged or with the fuel tank at least one-half (1/2) full.

X. Bluetooth Connectivity: Each vehicle listed in this Bid shall have Bluetooth Connectivity to allow handsfree phone operation.

Y. Paint: The entire unit shall be painted in accordance with automotive standards. All colors are to be solid and manufacturer standard and will be specified on the order. Certain items may require specific paint as noted. Bidder to note which colors are standard at no extra cost on each item bid. If no chart is submitted or no notations are made it will assume all colors are standard and no additional compensation will be made for any factory color ordered.

Z. Additional Option Package: This has been included on the pricing pages for the bidder to provide several of their more popular options for the item being bid. In the event of an order for one (1) or more of these options, it is the responsibility of the contractor to assure that the entire content(s) of the Option Package is made available to the ordering entity and is what the ordering entity is requesting to be included with their purchase.

1.4.2 - BODY SPECIFICATIONS

A. Frame, Axle, and Springs: Shall be manufacturer’s standard for the payload rating, unless otherwise specified.

B. Cab/Vehicle Body: Shall be the manufacturer’s standard protection closed type with safety glass throughout. Key type door lock in at least one (1) door.

C. Pickup Box: Shall be of the open express wide type with down swinging tailgate. The tailgate shall be fitted with shield top chains or other means of holding the tailgate in a 90-degree open position. The floor of the box shall be either all steel or aluminum and be the manufacturer’s standard box for model being bid. Inside box dimensions shall be manufacturer’s standard for box specified.

1.4.3 - OPTIONAL EQUIPMENT REQUIREMENTS (WHEN ORDERED)

A. 6 DOOR UTILITY BODY: Furnish and install a six (6) door utility body that is appropriately sized for the chassis. The quoted bid price is to include all parts and labor for the installation of the body. If the body is installed on a four (4) wheel drive vehicle an off-road installation kit is to be provided. The body is to include the following features:

1. Removal of the pickup box if required.

2. Finish paint to match the cab.

3. All steel construction with a five (5) year rust through warranty.

4. Four (4) vertical compartments and two (2) horizontal compartments with standard shelving. All doors are to be keyed alike.

5. 3/16” tread plate floor.

6. Rear tailgate with rubber coated chains.

7. Rear step bumper with pintle hood recess.

8. Lighting package to comply with FMVSS 108.

B. SNOW PLOW PACKAGE: Furnish and install a snow plow package that includes the following features:

1. Chassis manufacturer’s snow plow prep package.

2. Blade with quick-disconnect mounting assembly. The blade is to incorporate a replaceable cutting edge.

3. Blade to be sized according to the manufacturer’s recommendation based on the rear axle track width.

Pricing will be established for single rear wheel and dual rear wheel track widths when applicable. Bidder will indicate the price and the blade length for each configuration in their bid response. The State may reject the proposed snow plow if the design is not appropriate for the truck configuration.

4. Power and blade.

5. Plow lights and markers.

6. In cab controls installed in a convenient location for the driver.

C. 2 YARD DUMP BODY: Furnish and install a 2 Yard Dump Body that is appropriately sized for the chassis. The dump body is to include the following features:

1. Cab Shield.

2. Double acting tailgate.

3. 15 GPM Central Hydraulic system w/9 Ton double acting hoist.

4. All DOT safety items such as cab lights, rubber mounted bed lights, bed props, and mud flaps.

5. Finish paint to match the cab.

D. METAL SAFETY PARTITION: Furnish and install a metal wire mesh safety partition between the cab and load areas of the van. The partition is not to interfere with the seat travel or the side door opening of the load area.

E. PLEXIGLAS SAFETY PARTITION: Furnish and install a clear plexiglass safety partition between the cab and load area of the van. The partition is not to interfere with the seat travel or the side door opening of the load area.

F. TRAILER TOW PACKAGE: The trailer tow package is to include a Reese type receive tube and trailer receptacle.

G. 7-PIN TRAILER RECEPTACLE WIRING (ODOT WIRING SPECIFICATION): Furnish and install a 7-pin trailer receptacle at the rear of the truck that is wired per Supplement A.

H. BED LINER: Furnish and install a bed liner that is to be a Spray-In Liner (aftermarket installation will be accepted).

1.5 - DELIVERY

1.5.1 - ORDER CONFIRMATION

Upon receipt of an order from an ordering agency, the contractor will confirm receipt of the agency’s order by electronic means.

The contractor is to provide confirmation by electronic means once the order has been placed with the manufacturer. The confirmation document shall confirm the contractor’s order number, specific item(s), order quantities, and unit price. The confirmation document may be a copy of the agency’s order with the contractor’s order number entered thereon.

Upon receipt of the vehicle from the manufacturer, the dealer is to acknowledge receipt of the vehicle to the ordering agency.

The contractor (dealer) is to then schedule delivery with the ordering agency. Delivery may be refused by the ordering agency if delivery was not scheduled. Delivery to the ordering agency is to be accomplished within seven (7) days after the contractor receives and services ordered items (for Delayed Delivery refer to Section 1.5.4 of this document).

1.5.2 - ORDERING ENTITY CONTACT

Any State of Ohio ordering entity and/or political subdivision ordering from this contract needs to be sure that they have included a contact, phone/fax numbers on the purchase order to the dealership. State’s Cooperative Purchasing members need to be sure to include their current membership certificate number and / or a copy of their current membership certificate when placing an order to the dealership.

1.5.3 - PERFORMANCE AGREEMENT

The manufacturer has, upon occasion, oversold productive capability, resulting in an inability to deliver all of the contractor’s properly entered and acknowledged orders. When this occurs, the contractor cannot deliver for reasons beyond his control and cannot be held responsible. Usually, the manufacturer will complete deliveries with the new model year vehicle at the contractor’s bid price.

1.5.4 - DELAYED DELIVERY

A. Certain agencies may require delayed delivery on various items within this Contract. For any vehicle order that requests delayed delivery, the storage charges per day shall commence seven (7) calendar days after agency contact person notification that vehicle(s) so ordered are serviced and ready for delivery. The rate of such charges shall be indicated on the catalog item as Delayed Delivery Daily Storage Charge. Failure to include a dollar amount at bid submission for the Delayed Delivery Daily Storage Charge will be interpreted as $0.00.

B. If ordering entities elect to take delivery at the Contractor’s place of business, pickup must be within seven (7) calendar days after notification that the vehicle is serviced and ready for pickup. If the vehicle is not picked up within the seven

(7) calendar days after notification, the ordering entity is subject to a storage charge. The rate of such charges shall be indicated on the catalog item as Delayed Delivery Daily Storage Charge. Failure to include a dollar amount at bid submission for the Delayed Delivery Daily Storage Charge will be interpreted as $0.00.

1.5.5 - DELIVERY INSTRUCTIONS

The transporting and delivery of automobiles shall be accomplished by surface transport, or by being driven individually. Tow bar delivery is not acceptable. All deliveries shall be effected per bid commitment. Failure to meet delivery requirements may be cause for cancellation, only with the approval of the Office of Procurement Services.

1.5.6 - MANUFACTURERS PRODUCTION TERMINATION NOTICE (BUILD-OUT)

A. The contractor is required to notify the Office of Procurement Services when build out dates and dealer order cutoff dates are released by the manufacturer. A build out schedule is listed in the Contract to assist entities in planning vehicle purchases. With build out notification, the contractor must provide the status of pricing: price protection (maintaining current prices for the next model year) or the proposed new model year pricing. If new model year pricing is unknown at the time of current model year build out, the Contractor must communicate that pricing is to be determined (refer to Section 3.3 of this document for model year and model year pricing updates). Failure to provide timely notification may result in breach of contract.

B. Orders prior to manufacturer production termination notice (build-out date): All orders placed against any contract resulting from this bid, shall be provided to the contractor no later than the manufacturer’s build-out date, which in the past is usually around March, but may be much earlier. Agencies will be notified of these dates but are urged to submit their orders as quickly as possible after receipt of the contract.

C. All orders received and accepted by the contractor on, or prior to, the build-out date shall guarantee delivery of the vehicle as described on the purchase order at the Contract price. In the event the manufacturer cancels a confirmed order placed by an ordering agency due to the model year build-out, the contractor must notify the ordering agency immediately and provide evidence of manufacturer cancellation. If the contract has been amended to include the next model year with approved pricing, the ordering agency may opt to proceed with their order for the new model year at pricing approved in the contract. The ordering agency should confirm in writing to the contractor that they want to proceed with the next model year. The contractor should attempt to maintain the ordering agency’s place in line if the next model year is ordered.

D. Any order received by the contractor after the build-out date for that model year will be subject to availability. The contractor reserves the right to accept or reject these orders. The contractor will be required to notify the ordering agency, within five (5) working days, after the purchase order has been received by the contractor, whether the purchase order will be accepted or rejected. If the purchase order cannot be accepted, it shall be returned to the ordering agency by the contractor. Once accepted, the contractor shall be required to fulfill the order. Failure to do so may result in the ordering agency purchasing a comparable vehicle from another source. The contractor may be held liable for any difference in price.

1.6 - NOTES

1.6.1 - WARRANTY

Unless ordered with extended warranty, manufacturer’s standard warranty shall apply, copy of warranty to be delivered with vehicle(s) purchased. Order will be considered incomplete until warranty is delivered. Bidder to attach this information via the Questionnaire.

1.6.2 - SPECIFICATION CONFORMATION & EXTRA ACCESSORIES

Any delivered vehicle not conforming to these specifications shall be rejected and it will be the responsibility of the dealer or manufacturer to comply with State of Ohio requirements. Any extra accessories delivered on vehicles cannot and will not be paid for.

1.6.3 - ORDERING REQUIREMENTS/LIMITATIONS

Some equipment requested may be available only in combination with other options or subject to additional ordering requirements or limitations. Be sure such requirements are noted. Once awarded, contractors are expected to deliver vehicles as ordered, incurring no additional costs beyond the stated prices.

1.6.4 - ADDITIONAL OPTIONS

Bidders may elect to quote some of their more popular options for the item being bid. The options(s) being offered must be available for the item being bid. The additional options being offered must not change the item model being bid.

If offering additional options, include the information in the Additional Option Package on the Item Grid.

1.6.5 - DIFFERENTIAL TYPE/RATIO

For the purposes of this bid the terms limited slip, anti-spin, automatic locking, rear locking, TRAC-LOC, etc. are to have the same meaning. The bidder is to state the standard rear axle ratio being provided (include information on the Specification Identification & Unspecified Option Price form and attach form via Questionnaire) and is to quote any additional ratio that may be available when preparing their bid.

1.7 - *SPECIFICATION SHEETS

Shown below are the specifications requirements for equipment that the State desires to purchase. These specifications are only considered as necessary to establish functional requirements. Proprietary design, exact dimensions, capacities, or restrictive features will not preclude acceptance of other recognized alternates meeting comparable performance requirements as determined by the Department of Administrative Services. List all deviations providing equivalent performance in the Questionnaire. Failure to comply may deem the bid not responsive.

ITEM 14AT, PICKUP FULL SIZE 6,100 LB 2WD REG CAB LONG BED

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 1500

Model Number: CC10903

Delivery, Days After Receipt of Order: 180 Days (estimated)

Line No. Standard Specification Items Minimum Requirements

Powertrain

1. Engine Type (Liter / Cylinder) Turbo Max 4 cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Required

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 2WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 8

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

17. Restraint System (Driver & Passenger) Required

18. Supplement Restraint System (Driver & Passenger) Required

*Indicates removal of Item 1AT from the contract, per Amendment 1.

**Indicates model year update to 2026, per amendment 3 effective 9/11/2025

ITEM 14AT, PICKUP FULL SIZE 6,100 LB 2WD REG CAB LONG BED (continued)

Safety (continued)

19. Power Antilock Brakes (Front and Rear)

Required

20. Rear Camera Required

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 3

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 133

28. Fuel Capacity (Gal.) 28

29. Headroom (Front) (in.) 40

30. Leg Room (Front) (in.) 41

31. Hip Room (Front) (in.) 60

32. Shoulder Room (Front) (in.) 65

33. Cargo Volume (cu. ft.) 75

34. Payload (lbs.) 1,790

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,100

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

44. Cargo Dome Light Automatic

45. Floor Mats N/A

ITEM 14AT, PICKUP FULL SIZE 6,100 LB 2WD REG CAB LONG BED (continued)

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) - online

49. Service Manual(s) - online

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

51. Seat Belt Extender - SBE

52. Cloth Seat Covering - HIT

53. Bed Liner - CGN

54. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82

56. All Terrain Tires - QDV

57. Trailer Tow Mirrors - DPO

58. Backup Alarm – 8S3

59. Hybrid Engine – N/A

60. Short Bed Length - N/A

Unspecified Option Price: 3% above manufacturer invoice

Standard Rear Axle Ratio: 3.42

ITEM 15AT, PICKUP FULL SIZE 6,300 LB 4WD REG CAB LONG BED

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 1500

Model Number: CK10903

Powertrain

1. Engine Type (Liter / Cylinder) 4 Cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Required

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 4WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 8

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

17. Restraint System (Driver & Passenger) Required

ITEM 15AT, PICKUP FULL SIZE 6,300 LB 4WD REG CAB LONG BED (continued)

Safety (continued)

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 3

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 133

28. Fuel Capacity (Gal.) 28

29. Headroom (Front) (in.) 40

30. Leg Room (Front) (in.) 41

31. Hip Room (Front) (in.) 60

32. Shoulder Room (Front) (in.) 65

33. Cargo Volume (cu. ft.) 74

34. Payload (lbs.) 1,790

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,300

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

ITEM 15AT, PICKUP FULL SIZE 6,300 LB 4WD REG CAB LONG BED (continued)

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) - online

49. Service Manual(s) - online

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

51. Seat Belt Extender - SBE

52. Cloth Seat Covering - HIT

53. Bed Liner - CGN

54. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1 (must have Z82)

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) - Z82

56. All Terrain Tires - QDV

57. Trailer Tow Mirrors - DPO

58. Backup Alarm – 853

60. Short Bed Length: N/A

ITEM 16AT, PICKUP FULL SIZE 6,200 LB 2WD EXT CAB SHORT BED

**Model Year and Model: MY2026 Silverado 1500

Model Number: CC10753

Powertrain

1. Engine Type (Liter / Cylinder) 4 Cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Required

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 2WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 6.5

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

17. Restraint System (Driver & Passenger) Required

ITEM 16AT, PICKUP FULL SIZE 6,200 LB 2WD EXT CAB SHORT BED (continued)

Safety (continued)

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 6

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 140

28. Fuel Capacity (Gal.) 28

29. Headroom (Front/Rear) (in.) 41/39

30. Leg Room (Front/Rear) (in.) 41/33

31. Hip Room (Front/Rear) (in.) 60/61

32. Shoulder Room (Front/Rear) (in.) 65/65

33. Cargo Volume (cu. ft.) 57

34. Payload (lbs.) 1,790

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,200

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

ITEM 16AT, PICKUP FULL SIZE 6,200 LB 2WD EXT CAB SHORT BED (continued)

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) - online

49. Service Manual(s) - online

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

51. Seat Belt Extender - SBE

52. Cloth Seat Covering - HIT

53. Bed Liner- CGN

54. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1 (Must have Z82)

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82

56. All Terrain Tires - QDV

57. Trailer Tow Mirrors - DPO

58. Backup Alarm – 8S3

ITEM 17AT, PICKUP FULL SIZE 6,400 LB 4WD EXT CAB SHORT BED

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 1500

Model Number: CK10753

Powertrain

1. Engine Type (Liter / Cylinder) 4 Cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Required

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 4WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 6.5

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

17. Restraint System (Driver & Passenger) Required

TEM 17AT, PICKUP FULL SIZE 6,400 LB 4WD EXT CAB SHORT BED (continued)

Safety (continued)

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 6

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 140

28. Fuel Capacity (Gal.) 28

29. Headroom (Front/Rear) (in.) 41/39

30. Leg Room (Front/Rear) (in.) 41/33

31. Hip Room (Front/Rear) (in.) 60/61

32. Shoulder Room (Front/Rear) (in.) 65/65

33. Cargo Volume (cu. ft.) 57

34. Payload (lbs.) 1,690

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,400

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

ITEM 17AT, PICKUP FULL SIZE 6,400 LB 4WD EXT CAB SHORT BED (continued)

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) - online

49. Service Manual(s) - online

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

51. Seat Belt Extender - SBE

52. Cloth Seat Covering - HIT

53. Bed Liner- CGN

54. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1 (must have Z82)

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82

56. All Terrain Tires - QDV

57. Trailer Tow Mirrors - DPO

58. Backup Alarm – 8S3

59. Hybrid Engine - N/A

ITEM 18AT, PICKUP FULL SIZE 6,200 LB 2WD CREW CAB SHORT BED

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 1500

Model Number: CC10543

Powertrain ***1. Engine Type (Liter / Cylinder) 4 cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 2WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 69.6”

13. Rear Step Bumper Manufacturer Standard

14. Full Size Doors 4

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

18. Restraint System (Driver & Passenger) Required

19. Supplement Restraint System

***Indicates update to engine type, per amendment 4 effective 10/1/2025

ITEM 18AT, PICKUP FULL SIZE 6,200 LB 2WD CREW CAB SHORT BED (continued)

Safety (continued)

20. Power Antilock Brakes

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 6

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 140

29. Fuel Capacity (Gal.) 28

30. Headroom (Front/Rear) (in.) 41/39

31. Leg Room (Front/Rear) (in.) 41/38

32. Hip Room (Front/Rear) (in.) 60/63

33. Shoulder Room (Front/Rear) (in.) 65/65

34. Cargo Volume (cu. ft.) 50

35. Payload (lbs.) 1,700

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,200

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

45. Cargo Dome Light Automatic

46. Floor Mats N/A

ITEM 18AT, PICKUP FULL SIZE 6,200 LB 2WD CREW CAB SHORT BED (continued)

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) - online

50. Service Manual(s) - online

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

52. Seat Belt Extender - SBE

53. Cloth Seat Covering - HIT

54. Bed Liner - CGN

55. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1 (must have Z82)

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82

57. All Terrain Tires – QDV

58. Trailer Tow Mirrors - DPO

59. Backup Alarm – 8S3

ITEM 19AT, PICKUP FULL SIZE 6,400 LB 4WD CREW CAB SHORT BED

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 1500

Model Number: CK10543

Powertrain ***1. Engine Type (Liter / Cylinder) 4 cylinder

2. Horsepower (Net HP) 280

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) Bidder to specify on the Specification Identification, Unspecified Option Price, & Delivery form and attach form via Questionnaire

9. Drivetrain 4WD Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 69.6”

13. Rear Step Bumper Manufacturer Standard

14. Full Size Doors 4

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Red Hot, Summit White, Black, Sterling Grey Metallic

Safety

18. Restraint System (Driver & Passenger) Required

***Indicates update to engine type, per amendment 4 effective 10/1/2025

ITEM 19AT, PICKUP FULL SIZE 6,400 LB 4WD CREW CAB SHORT BED (continued)

Safety (continued)

20. Power Antilock Brakes

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 6

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 140

29. Fuel Capacity (Gal.) 28

30. Headroom (Front/Rear) (in.) 41/39

31. Leg Room (Front/Rear) (in.) 41/38

32. Hip Room (Front/Rear) (in.) 60/63

33. Shoulder Room (Front/Rear) (in.) 65/65

34. Cargo Volume (cu. ft.) 50

35. Payload (lbs.) 1,630

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 6,400

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

ITEM 19AT, PICKUP FULL SIZE 6,400 LB 4WD CREW CAB SHORT BED (continued)

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) - online

50. Service Manual(s) - online

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

52. Seat Belt Extender - SBE

53. Cloth Seat Covering - HIT

54. Bed Liner - CGN

55. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1 (must have Z82)

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82

57. All Terrain Tires - QDV

58. Trailer Tow Mirrors - DPO

59. Backup Alarm – 8S3

ITEM 28AT, PICKUP FULL SIZE 9,900 LB 2WD EXT CAB LONG BED SRW

**Model Year and Model: MY2026 Silverado 3500

Model Number: CC30953

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 2WD

10. Rear Axle Single Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Red Hot, Summit White, Black, Sterling Grey Metallic, Lakeshore Blue Metallic

Safety

18. Restraint System (Driver & Passenger) Required

ITEM 28AT, PICKUP FULL SIZE 9,900 LB 2WD EXT CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Safety (continued)

20. Power Antilock Brakes (Front and Rear) Required

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 6

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 158

29. Fuel Capacity (Gal.) 36

30. Headroom (Front/Rear) (in.) 40/38

31. Leg Room (Front/Rear) (in.) 41/31

32. Hip Room (Front/Rear) (in.) 60/61

33. Shoulder Room (Front/Rear) (in.) 65/65

34. Cargo Volume (cu. ft.) 75

35. Payload (lbs.) 4,000

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

ITEM 28AT, PICKUP FULL SIZE 9,900 LB 2WD EXT CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) - online

50. Service Manual(s) - online

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

52. Seat Belt Extender - SBE

53. Cloth Seat Covering - HIT

54. Bed Liner - CGN

55. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) - Standard

57. All Terrain Tires - QDV

58. Trailer Tow Mirrors – DPO (must have JL1)

59. Backup Alarm – 8S3

60. 6-Door Utility Body – 6UTL

61. Dual Rear Wheels (DRW) - DRW

62. Transmission Power Take-off Provision – PTO (must have L5P)

63. Dual Batteries: 70 amp hour – K42

64. Heavy Duty Alternator (220 Amp Minimum) -KHF

65. Additional Option Package: 6.6 Diesel – L5P

Standard Rear Axle Ratio: 3.73

ITEM 29AT, PICKUP FULL SIZE 9,900 LB 4WD EXT CAB LONG BED SRW

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 Silverado 3500

Model Number: CK30953

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 4WD

10. Rear Axle Single Rear Wheels (SRW) Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Red Hot, Summit White, Black, Sterling Grey Metallic, Lakeshore Blue Metallic

Safety

18. Restraint System (Driver & Passenger) Required

ITEM 29AT, PICKUP FULL SIZE 9,900 LB 4WD EXT CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Safety (continued)

20. Power Antilock Brakes (Front and Rear) Required

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 6

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 158

29. Fuel Capacity (Gal.) 36

30. Headroom (Front/Rear) (in.) 40/38

31. Leg Room (Front/Rear) (in.) 41/31

32. Hip Room (Front/Rear) (in.) 60/61

33. Shoulder Room (Front/Rear) (in.) 65/65

34. Cargo Volume (cu. ft.) 75

35. Payload (lbs.) 4,000

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

ITEM 29AT, PICKUP FULL SIZE 9,900 LB 4WD EXT CAB LONG BED SRW (continued)

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) - online

50. Service Manual(s) - online

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

52. Seat Belt Extender – SBE

53. Cloth Seat Covering - HIT

54. Bed Liner - CGN

55. Tow Hitch / 7-Pin Receptacle / Brake Controller – JL1

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) - Standard

57. All Terrain Tires – QDV

58. Trailer Tow Mirrors – DPO

59. Backup Alarm – 8S3

60. 6-Door Utility Body – 6UTL

61. Dual Rear Wheels (DRW) - DRW

62. Transmission Power Take-off Provision – PTO (must have L5P)

63. Dual Batteries: 70 amp hour – K42

64. Heavy Duty Alternator (220 Amp Minimum) - KHF

65. Manufacturer Snow Plow Prep Package (Includes HD Suspension, HD Alternator, HD Transmission Cooling, Skid Plates, Etc.) Does not include Snow Plow - VYU

66. Snow Plow Package for DRW (order w/Snow Plow Prep Package). 7.6 Foot - BOSS7

67. Snow Plow Package for SRW (order w/Snow Plow Prep Package). 8 Foot – BOSS8

68. Additional Option Package: 6.6 Diesel – L5P

IITEM 32AT, CAB & CHASSIS 12,800 LB 2WD REG CAB DRW

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 3500 Chassis

Model Number: CC31003

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 2WD

10. Rear Axle Dual Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Tires All Season

13. Spare Tire (No Tire Mending Kit Accepted) Required

14. Paint Red Hot, Summit White, Black, Sterling Grey Metallic, Lakeshore Blue Metallic

Safety

15. Restraint System (Driver & Passenger) Required

16. Supplement Restraint System (Driver & Passenger) Required

17. Power Antilock Brakes (Front and Rear) Required

18. Rear Camera Required

19. Bluetooth Connectivity Required

20. Factory Installed Running Boards Required

ITEM 32AT, CAB & CHASSIS 12,800 LB 2WD REG CAB DRW (continued)

Seating

21. Seating Capacity 3

22. Front Seat Type Split Bench

23. Seat Covering Cloth

24. Floor Covering Vinyl

Dimensions

25. Wheelbase (in.) 137

26. Fuel Capacity (Gal.) 63.5

27. Headroom (Front) (in.) 40

28. Leg Room (Front) (in.) 41

29. Hip Room (Front) (in.) 60

30. Shoulder Room (Front) (in.) 65

31. Payload (lbs.) 6,520

32. Gross Vehicle Weight Rating (GVWR)(lbs.) 12,800

Accessories

33. Air Conditioning Required

34. Tilt Wheel & Cruise Control Required

35. Power Windows & Door Locks Required

36. Keyed Door Locks Required

37. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

38. Intermittent Windshield Wipers Required

39. Radio Standard AM/FM

40. Exterior Rear-View Mirror Dual

41. Cargo Dome Light Automatic

42. Floor Mats N/A (rubber floors)

ITEM 32AT, CAB & CHASSIS 12,800 LB 2WD REG CAB DRW (continued)

Warranty

43. Rust Proofing Min. Factory Warranty

44. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

45. Parts Manual(s) - online

46. Service Manual(s) - online

47. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

48. Seat Belt Extender - SBE

49. Vinyl Seat Covering - HIT

50. Tow Hitch / 7-Pin Receptacle / Brake Controller – Z82

51. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82A (must have Z82)

52. All Terrain Tires - QZT

53. Trailer Tow Mirrors - DPO

54. Backup Alarm – 8S3

55. 6-Door Utility Body – 6UTL

56. 2 Yard Dump Body – 2YD

57. 84” CA in lieu of 60” CA (N/A with 2 Yard Dump Body) – 84CA

58. Diesel Engine – L5P

59. Transmission Power Take-off Provision – PTO (must have L5P)

60. Dual Batteries: 70 amp hours – K42

61. Heavy Duty Alternator (220 Amp Minimum) - KHF

ITEM 37AT, CAB & CHASSIS 12,800 LB 4WD CREW CAB DRW

Make/Manufacturer: Chevrolet

**Model Year and Model: MY2026 3500 Chassis

Model Number: CK31043

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) N/A

9. Drivetrain 4WD

10. Rear Axle Dual Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Full Size Doors 4

13. Tires All Season

14. Spare Tire (No Tire Mending Kit Accepted) Required

15. Paint Red Hot, Summit White, Black, Sterling Grey Metallic, Lakeshore Blue Metallic

Safety

16. Restraint System (Driver & Passenger) Required

17. Supplement Restraint System (Driver & Passenger) Required

18. Power Antilock Brakes (Front and Rear) Required

19. Rear Camera Required

20. Bluetooth Connectivity Required

21. Factory Installed Running Boards Required

ITEM 37AT, CAB & CHASSIS 12,800 LB 4WD CREW CAB DRW (continued)

Seating

22. Seating Capacity 6

23. Front Seat Type Split Bench

24. Seat Covering Cloth

25. Floor Covering Vinyl

Dimensions

26. Wheelbase (in.) 171

27. Fuel Capacity (Gal.) 63.5

28. Headroom (Front/Rear) (in.) 40/40

29. Leg Room (Front/Rear) (in.) 41/39

30. Hip Room (Front/Rear) (in.) 60/65

31. Shoulder Room (Front/Rear) (in.) 65/65

32. Payload (lbs.) 6,225

33. Gross Vehicle Weight Rating (GVWR)(lbs.) 12,800

Accessories

34. Air Conditioning Required

35. Tilt Wheel & Cruise Control Required

36. Power Windows & Door Locks Required

37. Keyed Door Locks Required

38. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

39. Intermittent Windshield Wipers Required

40. Radio Standard AM/FM

41. Exterior Rear-View Mirror Dual

42. Cargo Dome Light Automatic

43. Skid Plate(s) Required

44. Floor Mats N/A (rubber floors)

ITEM 37AT, CAB & CHASSIS 12,800 LB 4WD CREW CAB DRW (continued)

Warranty

45. Rust Proofing Min. Factory Warranty

46. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

47. Parts Manual(s) - online

48. Service Manual(s) - online

49. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - AMF

50. Seat Belt Extender - SBE

51. Vinyl Seat Covering - HIT

52. Tow Hitch / 7-Pin Receptacle / Brake Controller – Z82

53. 7-Pin Trailer Receptacle Wiring (See Supplement A) – Z82A (must have Z82)

54. All Terrain Tires - QZT

55. Trailer Tow Mirrors - DPO

56. Backup Alarm – 8S3

57. 6-Door Utility Body – 6UTL

58. 2 Yard Dump Body – 2YD

59. Diesel Engine – L5P

60. Transmission Power Take-off Provision – PTO (must have L5P)

61. Dual Batteries: 70 amp hour – K42

62. Heavy Duty Alternator (220 Amp Minimum) - KHF

63. Manufacturer Snow Plow Prep Package (Includes HD Suspension, HD Alternator, HD Transmission Cooling, Skid Plates, Etc.) Does not include Snow Plow - VYU

64. Snow Plow Package for DRW (order w/Snow Plow Prep Package). 8 foot – BOSS8

2 - STANDARD TERMS AND CONDITIONS

The State of Ohio Standard Terms and Conditions (revised 03/01/24) govern this Contract and are incorporated as if fully rewritten herein.

3 - SPECIAL CONTRACT TERMS AND CONDITIONS

3.1 - ORDER OF PRIORITY

The order of priority of the Contract will be the following: 1.) Specifications and Requirements; 2) Contract Specific Terms and Conditions; 3) Standard Terms and Conditions.

3.2 - AMENDMENT TO CONTRACT TERMS AND CONDITIONS

The following Amendments to the Contract Terms and Conditions do hereby become a part hereof. In the event that an amendment conflicts with the Contract Terms and Conditions, the Amendment will prevail.

3.3 - FIXED PRICE…