RSI023710_Contract_V3.pdf

STATE OF OHIO

DEPARTMENT OF ADMINISTRATIVE SERVICES

GENERAL SERVICES DIVISION

OFFICE OF PROCUREMENT SERVICES

4200 SURFACE ROAD, COLUMBUS, OH 43228-1395

MANDATORY USE CONTRACT FOR: New, Model Year 2025 or Newer, Sport Utility Vehicles, Cargo Vans, and Trucks;

Alternative Fuel Vehicles (SUVs and Midsize Trucks)

CONTRACT No.: RSI023710

CONTRACT ID: CTR023710-A2

EFFECTIVE DATES: 12/20/24 to 09/30/25

SUPPLIER: Cronin Ford North

The Department of Administrative Services has accepted bids submitted in response to Invitation to Bid No.

SRC0000022772. The evaluation of the bid response(s) has been completed. The bidder(s) listed herein have been determined to be the lowest responsive and responsible bidder(s) and have been awarded a contract for the items(s) listed. The respective bid response, including the Instructions to Bidders and Standard Terms and Conditions, special contract terms & conditions, any bid addenda, specifications, pricing schedules and any attachments incorporated by reference and accepted by DAS become a part of this Requirements Contract.

This Requirements Contract is effective beginning and ending on the dates noted above unless, prior to the expiration date, the Contract is renewed, terminated or cancelled in accordance with the Contract Terms and Conditions.

CONTRACT RENEWAL. This Contract may be renewed after the ending date of the Contract solely at the discretion of the Contracting Agency for a period of one month. Any further renewals will be by mutual agreement between the Contractor and the Contracting Agency for any number of times and for any period of time. The cumulative time of all mutual renewals may not exceed 09/30/2027 unless the Contracting Agency determines that additional renewal is necessary.

This Requirements Contract is available to all State Agencies, State institutions of higher education and properly registered members of the Cooperative Purchasing Program of the Department of Administrative Services, as applicable.

Agencies are eligible to make purchases of the listed supplies and/or services in any amount and at any time as determined by the agency. The State makes no representation or guarantee that agencies will purchase the volume of supplies and/or services as advertised in the Invitation to Bid.

This Requirements Contract and any Amendments thereto are available from the Ohio|Buys public portal at the following address:

https://supplier-emarketplace.ohio.gov/page.aspx/en/usr/login?ReturnUrl=%2fpage.aspx%2fen%2fbuy%2fhomepage

Signed: _____________________________________________________________________

Kathleen C. Madden, Director Date https://supplier-emarketplace.ohio.gov/page.aspx/en/usr/login?ReturnUrl=%2fpage.aspx%2fen%2fbuy%2fhomepage

1 - SPECIFICATIONS AND REQUIREMENTS

1.1 - SCOPE

These specifications define the State’s requirements for new, never titled, model year 2025 or newer sports utility vehicles (SUVS), trucks and cargo vans; included are alternative fuel SUVs and midsize trucks. These specifications are to be utilized by state agencies in the operation of state government. This includes political subdivisions that are members of the Department of Administrative Services, Office of Procurement Services Cooperative Purchasing Program.

Vehicle shall be the latest current model, complete with all standard equipment, unless otherwise specified. Any item which is standard equipment on the vehicle being bid, but not listed below, must not be removed from the vehicle. Manufacturer’s disclaimers indicate changes in product specifications may occur during the model year and they reserve the right to do so without repercussion. All current mandatory Department of Transportation safety requirements are to be furnished, including seat belts and shoulder harness.

The State may permit updates to model year and model year pricing for the same make/model upon manufacturer build out of the awarded model year (refer to Section 3.3 of this document for model year and model year pricing updates).

1.2 - CLASSIFICATION

Due to the life cycle of vehicles, usage data will change from year to year. The State makes no representation or guarantee as to the actual number of vehicles that will be purchased by participating agencies. The estimates listed below are based upon 2024 vehicle purchases and projections for 2025.

Item Number

Estimated # of Units Item Description

*1AT 40 Sport Utility Vehicle (SUV) Compact-Gasoline 1ATH 20 Sport Utility Vehicle (SUV) Compact -Hybrid 4ATEV 10 Crossover Sport Utility Vehicle (SUV) AWD – Full Electric 20AT 0 Pickup – Full Size – 8,500# GVWR – 2WD – Regular Cab – Long Bed 21AT 0 Pickup – Full Size – 8,500# GVWR – 4WD – Regular Cab – Long Bed 26AT 2 Pickup – Full Size – 9,900# GVWR – 2WD – Regular Cab – Long Bed - SRW 27AT 4 Pickup – Full Size – 9,900# GVWR – 4WD – Regular Cab – Long Bed - SRW 30AT 0 Pickup – Full Size – 9,900# GVWR – 2WD – Crew Cab – Long Bed - SRW 31AT 10 Pickup – Full Size – 9,900# GVWR – 4WD – Crew Cab – Long Bed - SRW

NOTE: Political subdivision purchases are not included in the figures shown above. The evaluation is based upon these State usage figures. This Contract will be available to political subdivisions in addition to the State usage projections above. Political subdivision purchases may represent a significant increase to the estimated purchase quantity.

For items with an Estimated Usage of 0, a value of 1 will be used for evaluation purposes.

*Indicates addition of Item 1AT to the contract, effective 01/21/25.

1.3 - APPLICABLE DOCUMENTS

A. Ohio Revised Code Section 125

B. Ohio Revised Code Chapters 4501, 4503, 4513, and 4517

C. Federal Motor Vehicle Safety Standards (FMVSS)

D. Society of Automotive Engineers (SAE) Automotive Technical Standards

E. Occupational Safety & Health Administration (OSHA) Regulations

F. U.S. Environmental Protection Agency (EPA) Laws & Regulations

G. Model Year 2025 or Manufacturer’s most current Model EPA Fuel Economy Guide

1.4 - REQUIREMENTS

In addition to the State of Ohio sport utility vehicle, cargo van, and truck specifications, the following items of factory-installed equipment shall be required as standard equipment on each vehicle listed in this bid, unless otherwise noted. Optional equipment required to be furnished on the units is noted on the State’s specifications. Options listed herein are to be factory installed except for any item(s) not available from the factory.

1.4.1 - REQUIRED STANDARD EQUIPMENT

The following is required standard equipment:

A. Four Speed Automatic Transmission (unless otherwise noted)

B. Outside Rearview Mirrors, Left and Right, Low Mount with break-a-way mirror head feature (unless otherwise specified, manufacturers largest standard manually operated left and right mirrors to be bid).

C. Inside Rearview Mirrors

D. Spare Wheel and Tire (of same manufacturer style and tread design as Original Equipment) with manufacturers standard spare tire mounting location, unless otherwise specified. Tire and wheels shall be conventional full size, if available. All tires to be radial unless otherwise stated. A tire mending kit can also be used as an alternative where noted.

E. Bumpers: Front and Rear, manufacturer’s standard, with the rear bumper to be a step bumper on all pickup trucks with factory beds or utility body.

F. Standard heater and defroster

G. Heavy duty radiator to include radiator overflow tank

H. Dual armrests

I. Dual visors

J. Dual airbags http://codes.ohio.gov/orc/125 http://codes.ohio.gov/orc/4501 http://codes.ohio.gov/orc/4503 http://codes.ohio.gov/orc/4513 http://codes.ohio.gov/orc/4517

K. Gauges on instrument panel, as standard for model being bid

L. 12V power point

M. Lug wrench and tire jack

N. Second row bench seat required on utility vehicles and crew cab trucks unless otherwise specified. Shall be manufacturer’s standard seating.

O. Passenger seat required on each van. Second row bench seat required on crew cab trucks unless otherwise specified. Shall be manufacturer’s standard seating.

P. Manufacturer’s standard floor covering. Floor covering in cargo vans to include load area.

Q. All wiring provided is to be properly sized and installed in accordance with the manufacturer’s recommendations. All wiring is to be adequately protected from cargo in the load space.

R. Rust Proofing: Each vehicle listed in this bid shall have the manufacturer’s standard corrosion protection system. A copy of the corrosion protection warranty is to be returned with the bid, certifying compliance to this requirement.

Bidder to provide this information via the Questionnaire.

NOTE: Failure to provide this warranty may result in disqualification of the bid.

S. Radio Suppression: Each vehicle listed in this bid shall have the manufacturer’s standard radio suppression system.

T. Key FOBS: Two sets of keys with FOBS enabling electronic keyless entry will be included with the delivery of the vehicle.

U. Restraint System and Supplemental Restraint Systems: Restraint Systems refers to lap and shoulder seat belts and Supplemental Restraint Systems refer to air bag systems.

V. Tires: Shall be as recommended by the manufacturer for the vehicle specified, and shall be premium quality of recognized manufacturer, steel belted radials (all season tread; unless otherwise specified).

W. All vehicles to be delivered ready to use, fully charged or with the fuel tank at least one-half (1/2) full.

X. Bluetooth Connectivity: Each vehicle listed in this Bid shall have Bluetooth Connectivity to allow handsfree phone operation.

Y. Paint: The entire unit shall be painted in accordance with automotive standards. All colors are to be solid and manufacturer standard and will be specified on the order. Certain items may require specific paint as noted. Bidder to note which colors are standard at no extra cost on each item bid. If no chart is submitted or no notations are made it will assume all colors are standard and no additional compensation will be made for any factory color ordered.

Z. Additional Option Package: This has been included on the pricing pages for the bidder to provide several of their more popular options for the item being bid. In the event of an order for one (1) or more of these options, it is the responsibility of the contractor to assure that the entire content(s) of the Option Package is made available to the ordering entity and is what the ordering entity is requesting to be included with their purchase.

1.4.2 - BODY SPECIFICATIONS

A. Frame, Axle, and Springs: Shall be manufacturer’s standard for the payload rating, unless otherwise specified.

B. Cab/Vehicle Body: Shall be the manufacturer’s standard protection closed type with safety glass throughout. Key type door lock in at least one (1) door.

C. Pickup Box: Shall be of the open express wide type with down swinging tailgate. The tailgate shall be fitted with shield top chains or other means of holding the tailgate in a 90-degree open position. The floor of the box shall be either all steel or aluminum and be the manufacturer’s standard box for model being bid. Inside box dimensions shall be manufacturer’s standard for box specified.

1.4.3 - OPTIONAL EQUIPMENT REQUIREMENTS (WHEN ORDERED)

A. 6 DOOR UTILITY BODY: Furnish and install a six (6) door utility body that is appropriately sized for the chassis. The quoted bid price is to include all parts and labor for the installation of the body. If the body is installed on a four (4) wheel drive vehicle an off-road installation kit is to be provided. The body is to include the following features:

1. Removal of the pickup box if required.

2. Finish paint to match the cab.

3. All steel construction with a five (5) year rust through warranty.

4. Four (4) vertical compartments and two (2) horizontal compartments with standard shelving. All doors are to be keyed alike.

5. 3/16” tread plate floor.

6. Rear tailgate with rubber coated chains.

7. Rear step bumper with pintle hood recess.

8. Lighting package to comply with FMVSS 108.

B. SNOW PLOW PACKAGE: Furnish and install a snow plow package that includes the following features:

1. Chassis manufacturer’s snow plow prep package.

2. Blade with quick-disconnect mounting assembly. The blade is to incorporate a replaceable cutting edge.

3. Blade to be sized according to the manufacturer’s recommendation based on the rear axle track width.

Pricing will be established for single rear wheel and dual rear wheel track widths when applicable. Bidder will indicate the price and the blade length for each configuration in their bid response. The State may reject the proposed snow plow if the design is not appropriate for the truck configuration.

4. Power and blade.

5. Plow lights and markers.

6. In cab controls installed in a convenient location for the driver.

C. 2 YARD DUMP BODY: Furnish and install a 2 Yard Dump Body that is appropriately sized for the chassis. The dump body is to include the following features:

1. Cab Shield.

2. Double acting tailgate.

3. 15 GPM Central Hydraulic system w/9 Ton double acting hoist.

4. All DOT safety items such as cab lights, rubber mounted bed lights, bed props, and mud flaps.

5. Finish paint to match the cab.

D. METAL SAFETY PARTITION: Furnish and install a metal wire mesh safety partition between the cab and load areas of the van. The partition is not to interfere with the seat travel or the side door opening of the load area.

E. PLEXIGLAS SAFETY PARTITION: Furnish and install a clear plexiglass safety partition between the cab and load area of the van. The partition is not to interfere with the seat travel or the side door opening of the load area.

F. TRAILER TOW PACKAGE: The trailer tow package is to include a Reese type receive tube and trailer receptacle.

G. 7-PIN TRAILER RECEPTACLE WIRING (ODOT WIRING SPECIFICATION): Furnish and install a 7-pin trailer receptacle at the rear of the truck that is wired per Supplement A.

H. BED LINER: Furnish and install a bed liner that is to be a Spray-In Liner (aftermarket installation will be accepted).

1.5 - DELIVERY

1.5.1 - ORDER CONFIRMATION

Upon receipt of an order from an ordering agency, the contractor will confirm receipt of the agency’s order by electronic means.

The contractor is to provide confirmation by electronic means once the order has been placed with the manufacturer. The confirmation document shall confirm the contractor’s order number, specific item(s), order quantities, and unit price. The confirmation document may be a copy of the agency’s order with the contractor’s order number entered thereon.

Upon receipt of the vehicle from the manufacturer, the dealer is to acknowledge receipt of the vehicle to the ordering agency.

The contractor (dealer) is to then schedule delivery with the ordering agency. Delivery may be refused by the ordering agency if delivery was not scheduled. Delivery to the ordering agency is to be accomplished within seven (7) days after the contractor receives and services ordered items (for Delayed Delivery refer to Section 1.5.4 of this document).

1.5.2 - ORDERING ENTITY CONTACT

Any State of Ohio ordering entity and/or political subdivision ordering from this contract needs to be sure that they have included a contact, phone/fax numbers on the purchase order to the dealership. State’s Cooperative Purchasing members need to be sure to include their current membership certificate number and / or a copy of their current membership certificate when placing an order to the dealership.

1.5.3 - PERFORMANCE AGREEMENT

The manufacturer has, upon occasion, oversold productive capability, resulting in an inability to deliver all of the contractor’s properly entered and acknowledged orders. When this occurs, the contractor cannot deliver for reasons beyond his control and cannot be held responsible. Usually, the manufacturer will complete deliveries with the new model year vehicle at the contractor’s bid price.

1.5.4 - DELAYED DELIVERY

A. Certain agencies may require delayed delivery on various items within this Contract. For any vehicle order that requests delayed delivery, the storage charges per day shall commence seven (7) calendar days after agency contact person notification that vehicle(s) so ordered are serviced and ready for delivery. The rate of such charges shall be indicated on the catalog item as Delayed Delivery Daily Storage Charge. Failure to include a dollar amount at bid submission for the Delayed Delivery Daily Storage Charge will be interpreted as $0.00.

B. If ordering entities elect to take delivery at the Contractor’s place of business, pickup must be within seven (7) calendar days after notification that the vehicle is serviced and ready for pickup. If the vehicle is not picked up within the seven

(7) calendar days after notification, the ordering entity is subject to a storage charge. The rate of such charges shall be indicated on the catalog item as Delayed Delivery Daily Storage Charge. Failure to include a dollar amount at bid submission for the Delayed Delivery Daily Storage Charge will be interpreted as $0.00.

1.5.5 - DELIVERY INSTRUCTIONS

The transporting and delivery of automobiles shall be accomplished by surface transport, or by being driven individually. Tow bar delivery is not acceptable. All deliveries shall be effected per bid commitment. Failure to meet delivery requirements may be cause for cancellation, only with the approval of the Office of Procurement Services.

1.5.6 - MANUFACTURERS PRODUCTION TERMINATION NOTICE (BUILD-OUT)

A. The contractor is required to notify the Office of Procurement Services when build out dates and dealer order cutoff dates are released by the manufacturer. A build out schedule is listed in the Contract to assist entities in planning vehicle purchases. With build out notification, the contractor must provide the status of pricing: price protection (maintaining current prices for the next model year) or the proposed new model year pricing. If new model year pricing is unknown at the time of current model year build out, the Contractor must communicate that pricing is to be determined (refer to Section 3.3 of this document for model year and model year pricing updates). Failure to provide timely notification may result in breach of contract.

B. Orders prior to manufacturer production termination notice (build-out date): All orders placed against any contract resulting from this bid, shall be provided to the contractor no later than the manufacturer’s build-out date, which in the past is usually around March, but may be much earlier. Agencies will be notified of these dates but are urged to submit their orders as quickly as possible after receipt of the contract.

C. All orders received and accepted by the contractor on, or prior to, the build-out date shall guarantee delivery of the vehicle as described on the purchase order at the Contract price. In the event the manufacturer cancels a confirmed order placed by an ordering agency due to the model year build-out, the contractor must notify the ordering agency immediately and provide evidence of manufacturer cancellation. If the contract has been amended to include the next model year with approved pricing, the ordering agency may opt to proceed with their order for the new model year at pricing approved in the contract. The ordering agency should confirm in writing to the contractor that they want to proceed with the next model year. The contractor should attempt to maintain the ordering agency’s place in line if the next model year is ordered.

D. Any order received by the contractor after the build-out date for that model year will be subject to availability. The contractor reserves the right to accept or reject these orders. The contractor will be required to notify the ordering agency, within five (5) working days, after the purchase order has been received by the contractor, whether the purchase order will be accepted or rejected. If the purchase order cannot be accepted, it shall be returned to the ordering agency by the contractor. Once accepted, the contractor shall be required to fulfill the order. Failure to do so may result in the ordering agency purchasing a comparable vehicle from another source. The contractor may be held liable for any difference in price.

1.6 - NOTES

1.6.1 - WARRANTY

Unless ordered with extended warranty, manufacturer’s standard warranty shall apply, copy of warranty to be delivered with vehicle(s) purchased. Order will be considered incomplete until warranty is delivered. Bidder to attach this information via the Questionnaire.

1.6.2 - SPECIFICATION CONFORMATION & EXTRA ACCESSORIES

Any delivered vehicle not conforming to these specifications shall be rejected and it will be the responsibility of the dealer or manufacturer to comply with State of Ohio requirements. Any extra accessories delivered on vehicles cannot and will not be paid for.

1.6.3 - ORDERING REQUIREMENTS/LIMITATIONS

Some equipment requested may be available only in combination with other options or subject to additional ordering requirements or limitations. Be sure such requirements are noted. Once awarded, contractors are expected to deliver vehicles as ordered, incurring no additional costs beyond the stated prices.

1.6.4 - ADDITIONAL OPTIONS

Bidders may elect to quote some of their more popular options for the item being bid. The options(s) being offered must be available for the item being bid. The additional options being offered must not change the item model being bid.

If offering additional options, include the information in the Additional Option Package on the Item Grid.

1.6.5 - DIFFERENTIAL TYPE/RATIO

For the purposes of this bid the terms limited slip, anti-spin, automatic locking, rear locking, TRAC-LOC, etc. are to have the same meaning. The bidder is to state the standard rear axle ratio being provided (include information on the Specification Identification & Unspecified Option Price form and attach form via Questionnaire) and is to quote any additional ratio that may be available when preparing their bid.

1.7 - SPECIFICATION SHEETS

Shown below are the specifications requirements for equipment that the State desires to purchase. These specifications are only considered as necessary to establish functional requirements. Proprietary design, exact dimensions, capacities, or restrictive features will not preclude acceptance of other recognized alternates meeting comparable performance requirements as determined by the Department of Administrative Services. List all deviations providing equivalent performance in the Questionnaire. Failure to comply may deem the bid not responsive.

*ITEM 1AT, SPORT UTILITY VEHICLE (SUV) COMPACT - GASOLINE

Make/Manufacturer: Ford

Model Year and Model: MY2025 Escape Active AWD

Model Number: U9G/200A

Delivery, Days After Receipt of Order: 45-120 Days (Upfits will delay delivery time)

Line No. Standard Specification Items Minimum Requirements

Powertrain

1. Engine Type (Liter / Cylinder) 1.5L /3 Cylinder

2. Horsepower (Net HP) 163

3. Transmission Automatic

4. Cooling System Heaviest Duty Available

5. Drive Train 4WD or AWD

Exterior

6. Tires All Season

7. Spare Tire/Tire Mending Kit Mending Kit

8. Paint Space Sliver, Vapor Blue Met, Carbonized Gray, Agate Black, Oxford White

9. Number of Doors 4

10. Wheelbase (inches) 95-110

*ITEM 1AT, SPORT UTILITY VEHICLE (SUV) COMPACT - GASOLINE (continued)

Safety

11. Restraint System (Driver & Passenger) Required

12. Supplement Restraint System (Driver & Passenger) Required

13. Rear Camera Required

14. Bluetooth Connectivity Required

Seating

15. Seating Capacity 5

16. Front Seat Type Bucket

17. Seat Covering Cloth

18. Floor Covering Carpet

Accessories

19. Air Conditioning Required

20. Tilt Wheel & Cruise Control Required

21. Power Windows & Door Locks Required

22. Keyed Door Locks Required

23. 2 Set of Keys with FOB Enabling Electronic Keyless Entry Required

24. Intermittent Windshield Wipers Required

25. Rear Window Defroster Required

26. Floor Mats Front/Rear

27. Radio Standard AM/FM

28. Exterior Rear-View Mirror Dual

29. Trunk/Cargo Light Automatic

Warranty

30. Rust Proofing Min. Factory Warranty

31. Manufacturer Standard Min. 3 yr./36,000 Mile

*ITEM 1AT, SPORT UTILITY VEHICLE (SUV) COMPACT - GASOLINE (continued)

Optional Equipment Items

32. Parts Manual(s) – N/A

33. Service Manual(s) - SVC

34. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

35. Seat Belt Extender - SBE

36. Vinyl Seat Covering – N/A

37. Safety: Adaptive Cruise Control – 68B

38. Safety: Lane-Departure Warning (LDW) - Included

39. Safety: Forward-Collision Warning (FCW) - Included

40. Safety: Lane-Keeping Assist (LKA) - Included

41. Safety: Rear Automatic Emergency Braking (Rear AEB) - Included

42. Safety: Lane-Centering Assist – Included with 68B

43. Safety: Automatic Emergency Braking (AEB) - Included

44. Safety: Rear Cross-Traffic Warning - Included

45. Safety: Blind-Spot Warning (BSW) - Included

46. Additional Option Package: Cold Weather Package – 19H

Unspecified Option Price: 2% above manufacturer invoice

Standard Rear Axle Ratio: 3.81

ITEM 1ATH, SPORT UTILITY VEHICLE (SUV) COMPACT – HYBRID

Make/Manufacturer: Ford

Model Year and Model: MY2025 Escape Hybrid ST-Line AWD

Model Number: U9N/400A

Powertrain

1. Engine Type (Liter/ Cylinder) 2.0L/4 Cylinder

2. Horsepower (Net HP) 163

3. Transmission Automatic

4. Cooling System Heaviest Duty Available

5. Drive Train 4WD or AWD

6. Alternative Fuel Type Electric

7. Fuel Capacity (Gal.) 14.2

Exterior

8. Tires All Season

9. Spare Tire/Tire Mending Kit Mending Kit

10. Paint Space Silver, Carbonized Gray, Vapor Blue Met, Agate Black

11. Number of Doors 4

12. Wheelbase (in.) 95-110

ITEM 1ATH, SPORT UTILITY VEHICLE (SUV) COMPACT – HYBRID (continued)

Safety

13. Restraint System (Driver & Passenger) Required

14. Supplement Restraint System (Driver & Passenger) Required

15. Rear Camera Required

16. Bluetooth Connectivity Required

Seating

17. Seating Capacity 5

18. Front Seat Type Bucket

19. Seat Covering Cloth

20. Floor Covering Carpet

Accessories

21. Air Conditioning Required

22. Tilt Wheel & Cruise Control Required

23. Power Windows & Door Locks Required

24. Keyed Door Locks Required

25. 2 Set of Keys with FOB Enabling Electronic Keyless Entry Required

26. Intermittent Windshield Wipers Required

27. Rear Window Defroster Required

28. Floor Mats Front/Rear

29. Radio Standard AM/FM

30. Exterior Rear-View Mirror Dual

31. Trunk/Cargo Light Automatic

Warranty

32. Rust Proofing Min. Factory Warranty

33. Manufacturer Standard Min. 3 yr./36,000 Mile

ITEM 1ATH, SPORT UTILITY VEHICLE (SUV) COMPACT – HYBRID (continued)

Optional Equipment Items

34. Parts Manual(s) – N/A

35. Service Manual(s) - SVC

36. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

37. Seat Belt Extender - SBE

38. Vinyl Seat Covering – N/A

39. Safety: Adaptive Cruise Control – 68B

40. Safety: Lane-Departure Warning (LDW) - Included

41. Safety: Forward-Collision Warning (FCW) - Included

42. Safety: Lane-Keeping Assist (LKA) - Included

43. Safety: Rear Automatic Emergency Braking (Rear AEB) - Included

44. Safety: Lane-Centering Assist – Included with 68B

45. Safety: Automatic Emergency Braking - Included

46. Safety: Rear Cross-Traffic Warning - Included

47. Safety: Blind-Spot Warning (BSW) - Included

48. Additional Option Package: Cold Weather Package – 19H

Standard Rear Axle Ratio: 2.91

ITEM 4ATEV – CROSSOVER SPORT UTILITY VEHICLE (SUV) AWD – FULL ELECTRIC

Make/Manufacturer: Ford

Model Year and Model: MY2025 Mustang Mach E AWD

Model Number: K1S/100A

Powertrain

1. Engine Type Electric

2. Horsepower (Net HP) 325

3. Transmission Single Speed Transmission

4. Electric Vehicle Battery Pack 200-300 mile range

5. Charge Time hrs @110/120v 49

6. Charge Time hrs @220/240v 10.1

7. Power Output (Kw) 242 Kw

8. Battery Type Lithium Ion

9. Drive Train AWD

Exterior

10. Tires All Season

11. Spare Tire/Tire Mending Kit Mending Kit

*12. Paint Shadow Black, Grabber Yellow, Desert Sand

13. Wheelbase (in.) 115 - 125

Safety

14. Restraint System (Driver & Passenger) Required

15. Supplement Restraint System (Driver & Passenger) Required

16. Power Antilock Brakes (Front & Rear) Required

17. Backup Camera Required

18. Bluetooth Connectivity Required

*Indicates update to the Standard available paint colors, effective 01/21/25.

ITEM 4ATEV – CROSSOVER SPORT UTILITY VEHICLE (SUV) AWD – FULL ELECTRIC (continued)

Seating

19. Seating Capacity 5

20. Front Seat Type Bucket

21. Seat Covering Cloth

22. Floor Covering Carpet

Accessories

23. Air Conditioning Required

24. Tilt Wheel & Cruise Control Required

25. Power Windows & Door Locks Required

26. Keyed Door Locks Required

27. 2 Set of Keys with FOB Enabling Electronic Keyless Entry Required

28. Intermittent Windshield Wipers Required

29. Rear Window Defroster Required

30. Floor Mats Front/Rear

31. Radio Standard AM/FM

32. Exterior Rear-View Mirror Dual

33. Trunk/Cargo Light Automatic

Warranty

34. Rust Proofing Min. Factory Warranty

35. Manufacturer Standard Min. 3 yr./36,000 Mile

ITEM 4ATEV – CROSSOVER SPORT UTILITY VEHICLE (SUV) AWD – FULL ELECTRIC (continued)

No. Standard Specification Items

Optional Equipment Items

36. Parts Manual(s) – N/A

37. Service Manual(s) - SVC

38. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

39. Seat Belt Extender - SBE

40. Safety: Adaptive Cruise Control - STD

41. Safety: Lane-Departure Warning (LDW) - STD

42. Safety: Forward-Collision Warning (FCW) - STD

43. Safety: Lane-Keeping Assist (LKA) - STD

44. Safety: Rear Automatic Emergency Braking (Rear AEB) - STD

45. Safety: Lane-Centering Assist - STD

46. Safety: Automatic Emergency Braking (AEB) - STD

47. Safety: Rear Cross-Traffic Warning - STD

48. Safety: Blind-Spot Warning (BSW) - STD

49. Drive train: RWD – K1R

50. Extended Range Battery – 99U

51. Additional Option Package: Mobile Charging Cord – 18D

52. Additional Option Package: Liner Package – 17P

53. Additional Option Package: Comfort Package – 67F

Standard Rear Axle Ratio: 9.719

ITEM 20AT, PICKUP FULL SIZE 8,500 LB 2WD REG CAB LONG BED

Make/Manufacturer: Ford

Model Year and Model: MY2025 F250 XL Reg Cab 2WD 142WB

Model Number: F2A/600A

Powertrain

1. Engine Type (Liter / Cylinder) 5.7L, V8

2. Horsepower (Net HP) 360

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85 (N/A with 66D bed delete)

9. Drivetrain 2WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 8

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Avalanche, Carbonized Gray, Race Red, Agate Black, Oxford White

Safety

17. Restraint System (Driver & Passenger) Required

18. Supplement Restraint System (Driver & Passenger) Required

ITEM 20AT, PICKUP FULL SIZE 8,500 LB 2WD REG CAB LONG BED (continued)

Safety (continued)

19. Power Antilock Brakes (Front and Rear)

Required

20. Rear Camera Required

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 3

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 133

28. Fuel Capacity (Gal.) 34

29. Headroom (Front) (in.) 40

30. Leg Room (Front) (in.) 41

31. Hip Room (Front) (in.) 60

32. Shoulder Room (Front) (in.) 65

33. Cargo Volume (cu. ft.) 75

34. Payload (lbs.) 3,000

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 8,500

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

44. Cargo Dome Light Automatic

45. Floor Mats N/A with vinyl floors

ITEM 20AT, PICKUP FULL SIZE 8,500 LB 2WD REG CAB LONG BED (continued)

Lin e

No.

Standard Specification Items Minimum Requirements

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) – N/A

49. Service Manual(s) - SVC

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

51. Seat Belt Extender - SBE

52. Cloth Seat Covering – 1S

53. Bed Liner – 85S

54. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) – RV-STYLE-7-PIN(ROUND)

56. All Terrain Tires - TBM

57. Trailer Tow Mirrors - STD

58. Backup Alarm – 76C

59. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

60. Additional Option Package: Toolbox – 19J (Black); 19K (Bright)

61. Additional Option Package: Tailgate Step – 85G

62. Additional Option Package: Tonneau Cover Retractable – 21J (Not available with bed delete, toolbox, or drop-in liner)

Standard Rear Axle Ratio: 3.73 reg axle

ITEM 21AT, PICKUP FULL SIZE 8,500 LB 4WD REG CAB LONG BED

Make/Manufacturer: Ford

Model Year and Model: MY2025 F250 XL Reg Cab 4WD 142WB

Model Number: F2B/600A

Powertrain

1. Engine Type (Liter / Cylinder) 5.7L, V8

2. Horsepower (Net HP) 360

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85 (N/A with 66D bed delete)

9. Drivetrain 4WD

Exterior

10. Body Side Moldings Manufacturer Standard

11. Rear Door Type Locking Tailgate

12. Bed Length (ft.) 8

13. Rear Step Bumper Manufacturer Standard

14. Tires All Season

15. Spare Tire (No Tire Mending Kit Accepted) Required

16. Paint Avalanche, Carbonized Gray, Race Red, Agate Black, Oxford White

Safety

17. Restraint System (Driver & Passenger) Required

18. Supplement Restraint System

ITEM 21AT, PICKUP FULL SIZE 8,500 LB 4WD REG CAB LONG BED (continued)

Safety (continued)

19. Power Antilock Brakes (Front and Rear)

Required

20. Rear Camera Required

21. Bluetooth Connectivity Required

22. Factory Installed Running Boards Required

Seating

23. Seating Capacity 3

24. Front Seat Type Split Bench

25. Seat Covering Vinyl

26. Floor Covering, Cab Interior Vinyl

Dimensions

27. Wheelbase (in.) 133

28. Fuel Capacity (Gal.) 34

29. Headroom (Front) (in.) 40

30. Leg Room (Front) (in.) 41

31. Hip Room (Front) (in.) 60

32. Shoulder Room (Front) (in.) 65

33. Cargo Volume (cu. ft.) 75

34. Payload (lbs.) 2,600

35. Gross Vehicle Weight Rating (GVWR)(lbs.) 8,500

Accessories

36. Air Conditioning Required

37. Tilt Wheel & Cruise Control Required

38. Power Windows & Door Locks Required

39. Keyed Door Locks Required

40. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

41. Intermittent Windshield Wipers Required

42. Radio Standard AM/FM

43. Exterior Rear-View Mirror Dual

44. Cargo Dome Light Automatic

45. Floor Mats N/A with vinyl floors

ITEM 21AT, PICKUP FULL SIZE 8,500 LB 4WD REG CAB LONG BED (continued)

Warranty

46. Rust Proofing Min. Factory Warranty

47. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

48. Parts Manual(s) – N/A

49. Service Manual(s) - SVC

50. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

51. Seat Belt Extender - SBE

52. Cloth Seat Covering – 1S

53. Bed Liner – 85S

54. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

55. 7-Pin Trailer Receptacle Wiring (See Supplement A) - RV-STYLE-7-PIN(ROUND)

56. All Terrain Tires - TBM

57. Trailer Tow Mirrors - STD

58. Backup Alarm – 76C

59. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

60. Manufacturer Snow Plow Prep Package (Includes HD Suspension, HD Alternator, HD Transmission Cooling, Skid Plates, Etc.) Does not include Snow Plow - 473

61. Snow Plow Package (order w/Snow Plow Prep Package). 8 foot blade – 8FT-PLOW

62. Additional Option Package: Toolbox – 19J (Black), 19K (Bright)

Standard Rear Axle Ratio: 3.73 reg axle

ITEM 26AT, PICKUP FULL SIZE 9,900 LB 2WD REG CAB LONG BED SRW

Make/Manufacturer: Ford

Model Year and Model: MY2025 F350 XL Reg Cab SRW 2WD

Model Number: F3A/610A

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85

9. Drivetrain 2WD

10. Rear Axle Single Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Avalanche, Carbonized Gray, Race Red, Agate Black, Oxford White

Safety

18. Restraint System (Driver & Passenger) Required

19. Supplement Restraint System

ITEM 26AT, PICKUP FULL SIZE 9,900 LB 2WD REG CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Safety (continued)

20. Power Antilock Brakes (Front and Rear) Required

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 3

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 133

29. Fuel Capacity (Gal.) 34

30. Headroom (Front) (in.) 39

31. Leg Room (Front) (in.) 41

32. Hip Room (Front) (in.) 60

33. Shoulder Room (Front) (in.) 65

34. Cargo Volume (cu. ft.) 75

35. Payload (lbs.) 4,000

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

45. Cargo Dome Light Automatic

46. Floor Mats N/A with vinyl floors

ITEM 26AT, PICKUP FULL SIZE 9,900 LB 2WD REG CAB LONG BED SRW (continued)

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) – N/A

50. Service Manual(s) - SVC

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

52. Seat Belt Extender - SBE

53. Cloth Seat Covering – 1S

54. Bed Liner – 85S

55. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) - RV-STYLE-7-PIN(ROUND)

57. All Terrain Tires - TBM

58. Trailer Tow Mirrors - STD

59. Backup Alarm – 76C

60. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

61. Dual Rear Wheels (DRW) - F3C/620A

62. Transmission Power Take-off Provision – N/A

63. Dual Batteries: 78 Ah – 86M

64. Heavy Duty Alternator (220 Amp Minimum) – 67E

65. Additional Option Package: Diesel Engine - 99T/44G

66. Additional Option Package: 6CA (DRW) SVC Body (paint to match cab) - 6DR-UTIL-56CA-DRW-85M

67. Additional Option Package: Tonneau Cover Retractable – 21J (not available with bed delete, toolbox, or drop-in bed liner)

Standard Rear Axle Ratio: 3.73

ITEM 27AT, PICKUP FULL SIZE 9,900 LB 4WD REG CAB LONG BED SRW

Make/Manufacturer: Ford

Model Year and Model: MY2025 F350 XL Reg Cab SRW 4WD

Model Number: F3B/610A

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85

9. Drivetrain 4WD

10. Rear Axle Single Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Tires All Season

16. Spare Tire (No Tire Mending Kit Accepted) Required

17. Paint Avalanche, Carbonized Gray, Race Red, Agate Black, Oxford White

Safety

18. Restraint System (Driver & Passenger) Required

19. Supplement Restraint System

ITEM 27AT, PICKUP FULL SIZE 9,900 LB 4WD REG CAB LONG BED SRW (continued)

Safety (continued)

20. Power Antilock Brakes (Front and Rear) Required

21. Rear Camera Required

22. Bluetooth Connectivity Required

23. Factory Installed Running Boards Required

Seating

24. Seating Capacity 3

25. Front Seat Type Split Bench

26. Seat Covering Vinyl

27. Floor Covering, Cab Interior Vinyl

Dimensions

28. Wheelbase (in.) 133

29. Fuel Capacity (Gal.) 34

30. Headroom (Front) (in.) 39

31. Leg Room (Front) (in.) 41

32. Hip Room (Front) (in.) 60

33. Shoulder Room (Front) (in.) 65

34. Cargo Volume (cu. ft.) 75

35. Payload (lbs.) 4,000

36. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

37. Air Conditioning Required

38. Tilt Wheel & Cruise Control Required

39. Power Windows & Door Locks Required

40. Keyed Door Locks Required

41. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

42. Intermittent Windshield Wipers Required

43. Radio Standard AM/FM

44. Exterior Rear-View Mirror Dual

45. Cargo Dome Light Automatic

46. Floor Mats N/A with vinyl

ITEM 27AT, PICKUP FULL SIZE 9,900 LB 4WD REG CAB LONG BED SRW (continued)

Warranty

47. Rust Proofing Min. Factory Warranty

48. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

49. Parts Manual(s) – N/A

50. Service Manual(s) - SVC

51. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

52. Seat Belt Extender - SBE

53. Cloth Seat Covering – 1S

54. Bed Liner – 85S

55. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

56. 7-Pin Trailer Receptacle Wiring (See Supplement A) - RV-STYLE-7-PIN(ROUND)

57. All Terrain Tires - TBM

58. Trailer Tow Mirrors - STD

59. Backup Alarm – 76C

60. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

61. Dual Rear Wheels (DRW) - F3D/620A

62. Manufacturer Snow Plow Prep Package (Includes HD Suspension, HD Alternator, HD Transmission Cooling, Skid Plates, Etc.) Does not include Snow Plow - 473

63. Snow Plow Package for DRW (order w/Snow Plow Prep Package). 9 foot - 9FT-PLOW

64. Snow Plow Package for SRW (order w/Snow Plow Prep Package). 8 foot – 8FT-PLOW

65. Transmission Power Take-off Provision – 62R

66. Dual Batteries: 78Ah – 86M

67. Heavy Duty Alternator (220 Amp Minimum) – 67E

68. Additional Option Package: Diesel Engine – 99T/44G

69. Additional Option Package: 56CA (DRW) SVC Body (paint to match cab) - 6DR-UTIL-56CA-DRW-85M

ITEM 30AT, PICKUP FULL SIZE 9,900 LB 2WD CREW CAB LONG BED SRW

Make/Manufacturer: Ford

Model Year and Model: MY2025 F350 XL Crew Cab SRW 2WD 176WB

Model Number: W3A/610A

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85

9. Drivetrain 2WD

10. Rear Axle Single Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Full Size Doors 4

16. Tires All Season

17. Spare Tire (No Tire Mending Kit Accepted) Required

18. Paint Ava

Safety

19. Restraint System (Driver & Passenger) Required

20. Supplement Restraint System

ITEM 30AT, PICKUP FULL SIZE 9,900 LB 2WD CREW CAB LONG BED SRW (continued)

Safety (continued)

21. Power Antilock Brakes (Front and Rear) Required

22. Rear Camera Required

23. Bluetooth Connectivity Required

24. Factory Installed Running Boards Required

Seating

25. Seating Capacity 6

26. Front Seat Type Split Bench

27. Seat Covering Vinyl

28. Floor Covering, Cab Interior Vinyl

Dimensions

29. Wheelbase (in.) 167

30. Fuel Capacity (Gal.) 48

31. Headroom (Front/Rear) (in.) 40/40

32. Leg Room (Front/Rear) (in.) 41/39

33. Hip Room (Front/Rear) (in.) 60/65

34. Shoulder Room (Front/Rear) (in.) 65/65

35. Cargo Volume (cu. ft.) 75

36. Payload (lbs.) 4,000

37. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

38. Air Conditioning Required

39. Tilt Wheel & Cruise Control Required

40. Power Windows & Door Locks Required

41. Keyed Door Locks Required

42. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

43. Intermittent Windshield Wipers Required

44. Radio Standard AM/FM

45. Exterior Rear-View Mirror Dual

46. Cargo Dome Light Automatic

47. Floor Mats N/A with vinyl floors

ITEM 30AT, PICKUP FULL SIZE 9,900 LB 2WD CREW CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Warranty

48. Rust Proofing Min. Factory Warranty

49. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

50. Parts Manual(s) – N/A

51. Service Manual(s) - SVC

52. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

53. Seat Belt Extender - SBE

54. Cloth Seat Covering – 1S

55. Bed Liner – 85S

56. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

57. 7-Pin Trailer Receptacle Wiring (See Supplement A) - RV-STYLE-7-PIN(ROUND)

58. All Terrain Tires - TBM

59. Trailer Tow Mirrors - STD

60. Backup Alarm – 76C

61. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

62. Dual Rear Wheels (DRW) - W3C/620A

63. Transmission Power Take-off Provision – 62R

64. Dual Batteries: 78 Ah – 86M

65. Heavy Duty Alternator (220 Amp Minimum) – 67E

66. Diesel Engine - 99T/44G

67. Additional Option Package: 6.7L High Output Power Stroke Turbo Diesel - 99M/44G

68. Additional Option Package: 56CA (DRW) SVC Body (paint to match cab) - 6DR-UTIL-56CA-DRW-85M

69. Additional Option Package: Tonneau Cover Retractable – 21J (not available with bed delete, toolbox, or drop-in bed liner)

ITEM 31AT, PICKUP FULL SIZE 9,900 LB 4WD CREW CAB LONG BED SRW

Make/Manufacturer: Ford

Model Year and Model: MY2025 F350 XL Crew Cab SRW 4WD 176WB

Model Number: W3B/610A

Powertrain

1. Engine Type (Liter / Cylinder) 6.0L, V8

2. Horsepower (Net HP) 380

3. Transmission Automatic

4. Locking Differential Manufacturer Standard

5. Alternator (amps) Manufacturer Standard

6. Battery (CCA) Manufacturer Standard

7. Cooling System Heaviest Duty Available

8. Alternative Fuel (Type) E85

9. Drivetrain 4WD

10. Rear Axle Single Rear Wheels Exterior

11. Body Side Moldings Manufacturer Standard

12. Rear Door Type Locking Tailgate

13. Bed Length (ft.) 8

14. Rear Step Bumper Manufacturer Standard

15. Full Size Doors 4

16. Tires All Season

17. Spare Tire (No Tire Mending Kit Accepted) Required

18. Paint Avalanche, Carbonized Gray, Race Red, Agate Black, Oxford White

Safety

19. Restraint System (Driver & Passenger) Required

20. Supplement Restraint System

ITEM 31AT, PICKUP FULL SIZE 9,900 LB 4WD CREW CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Safety (continued)

21. Power Antilock Brakes (Front and Rear) Required

22. Rear Camera Required

23. Bluetooth Connectivity Required

24. Factory Installed Running Boards Required

Seating

25. Seating Capacity 6

26. Front Seat Type Split Bench

27. Seat Covering Vinyl

28. Floor Covering, Cab Interior Vinyl

Dimensions

29. Wheelbase (in.) 167

30. Fuel Capacity (Gal.) 48

31. Headroom (Front/Rear) (in.) 40/40

32. Leg Room (Front/Rear) (in.) 41/39

33. Hip Room (Front/Rear) (in.) 60/65

34. Shoulder Room (Front/Rear) (in.) 65/65

35. Cargo Volume (cu. ft.) 75

36. Payload (lbs.) 4,000

37. Gross Vehicle Weight Rating (GVWR)(lbs.) 9,900

Accessories

38. Air Conditioning Required

39. Tilt Wheel & Cruise Control Required

40. Power Windows & Door Locks Required

41. Keyed Door Locks Required

42. 2 Sets of Keys with FOB Enabling Electronic Keyless Entry Required

43. Intermittent Windshield Wipers Required

44. Radio Standard AM/FM

45. Exterior Rear-View Mirror Dual

46. Cargo Dome Light Automatic

47. Floor Mats N/A with vinyl floors

ITEM 31AT, PICKUP FULL SIZE 9,900 LB 4WD CREW CAB LONG BED SRW (continued)

Line No. Standard Specification Items Minimum Requirements

Warranty

48. Rust Proofing Min. Factory Warranty

49. Manufacturer Standard Min. 3 yr./36,000 Mile

Optional Equipment Items

50. Parts Manual(s) – N/A

51. Service Manual(s) - SVC

52. Additional Set of Keys with FOB Enabling Electronic Keyless Entry - +1KEY

53. Seat Belt Extender = SBE

54. Cloth Seat Covering – 1S

55. Bed Liner – 85S

56. Tow Hitch / 7-Pin Receptacle / Brake Controller - STD

57. 7-Pin Trailer Receptacle Wiring (See Supplement A) - RV-STYLE-7-PIN(ROUND)

58. All Terrain Tires - TBM

59. Trailer Tow Mirrors - STD

60. Backup Alarm – 76C

61. 6-Door Utility Body - 6DR-UTIL-56CA-SRW

62. Dual Rear Wheels (DRW) - W3D/620A

63. Transmission Power Take-off Provision – 62R

64. Dual Batteries: 78 Ah – 86M

65. Heavy Duty Alternator (220 Amp Minimum) – 67E

66. Diesel Engine - 99T/44G

67. Manufacturer Snow Plow Prep Package (Includes HD Suspension, HD Alternator, HD Transmission Cooling, Skid Plates, Etc.) Does not include Snow Plow - 473

68. Snow Plow Package for DRW (order w/Snow Plow Prep Package). 9 foot blade length - 9FT-PLOW

69. Snow Plow Package for SRW (order w/Snow Plow Prep Package). 8 foot blade length - 8FT-PLOW

70. Additional Option Package: 6.7L High Output Power Stroke Turbo Diesel - 99M/44G

71. Additional Option Package: 56CA (DRW) SVC Body (paint to match cab) - 6DR-UTIL-56CA-DRW-85M

2 - STANDARD TERMS AND CONDITIONS

The State of Ohio Standard Terms and Conditions (revised 03/01/24) govern this Contract and are incorporated as if fully rewritten herein.

3 - SPECIAL CONTRACT TERMS AND CONDITIONS

3.1 - ORDER OF PRIORITY

The order of priority of the Contract will be the following: 1.) Specifications and Requirements; 2) Contract Specific Terms and Conditions; 3) Standard Terms and Conditions.

3.2 - AMENDMENT TO CONTRACT TERMS AND CONDITIONS

The following Amendments to the Contract Terms and Conditions do hereby become a part hereof. In the event that an amendment conflicts with the Contract Terms and Conditions, the Amendment will prevail.

3.3 - FIXED PRICE WITH ECONOMIC ADJUSTMENT FOR MODEL YEAR UPDATE

The contract prices(s) will remain firm at the listed price(s) for the model year awarded for the duration of the contract. Upon notification of the Model Year Build out of the Model Year awarded, the Contractor may submit a request to roll over current pricing to the next model year or increase their prices for the next model year of the Make/Model awarded, to be effective thirty

(30) calendar days after acceptance by DAS. If pricing is unknown at the time of build out notification, Contractor can request the price adjustment as soon as that information is available. Contractors must submit price increase requests for the next model year of Make/Model awarded no later than 90 days prior to the end of the current contract.