For more information, please visit our online supplier portal, located at https://procurement.opengov.com/portal/meridenct

City of Meriden

Purchasing Department

142 East Main St. Room 210

Meriden, CT 06450

RFQ027-25 ON-CALL TRADE LABOR

Project ID: RFQ027-25

RELEASE DATE: September 21, 2026

RESPONSE DEADLINE: October 15, 2026, 11:00 am

Please refer to the project timeline in this document for all important deadlines.

Request For Proposal #RFQ027-25

Title: RFQ027-25 On-Call Trade Labor

Table Of Contents

1. LEGAL NOTICE

2. INFORMATION TO PROPOSERS

3. TRADE PROJECT DETAILS

4. EVALUATIONS/QUALIFICATIONS

5. VENDOR SUBMISSION FORMS

Attachments:

A - Contractors Agreement - Sample

B - Insurance Requirements

LEGAL NOTICE

REQUEST FOR QUALIFICATIONS

The City of Meriden is accepting electronic qualifications for:

RFQ027-25 On-Call Trade Labor

The City of Meriden is soliciting qualifications various trade labor services for future projects funded by a variety of sources to be implemented by the City of Meriden..

Proposals with pricing shall be submitted as electronic responses per specifications obtained via the City eProcurement Portal: https://procurement.opengov.com/portal/meridenct and on the State of Connecticut

Department of Administrative Services website (https://webprocure.proactiscloud.com).

Proposals may be received up to but not later than 11:00 am, Thursday, October 15, 2026 via the City eProcurement Portal located at https://procurement.opengov.com/portal/meridenct. The City eProcurement

Portal Clock is the official clock for the determination of all deadline dates and times. Without exception, responses will not be accepted after the submission deadline regardless of any technical difficulties. Please submit electronic responses via the City eProcurement Portal:

https://procurement.opengov.com/portal/meridenct by way of the eProcurement Portal, responses will be locked and digitally encrypted until the submission deadline passes.

The companies will be evaluated and selected based on the capability to perform the work required, past record performance, knowledge of State and Municipal procedures and proposed rates and fees. The right is reserved to reject any or all proposals, in whole or in part, to award any item, group of items, or total proposal, and to waive informality or technical defects, if it is deemed to be in the best interest of the City of Meriden. No proposer may withdraw its proposal within ninety (90) days of the date of the opening.

The City reserves the right to reject any or all proposals and may waive any informality.

The City of Meriden is an Affirmative Action/Equal Opportunity Employer. Disadvantaged, minority, small, and women business enterprises are encouraged to respond.

Rawle Dummett Purchasing Officer City of Meriden, CT 06450-8022 Dated: September 21, 2026 https://procurement.opengov.com/po1tal/meridenct https://webprocure.proactiscloud.com/

INFORMATION TO PROPOSERS

1. SUMMARY

The purpose of this solicitation is to secure qualified trade labor services for future municipal projects administered by the City of Meriden. Funded through multiple streams, these projects will vary significantly in scope and scale. The resulting contract will serve as a framework, allowing the City to obtain project-specific fixed quotes or execute work based on the hourly rate schedules provided herein. Detailed scopes of work are not available at this time and will be provided during subsequent project-level solicitations.

2. TIMELINE

Release Project Date: September 21, 2026

Question Submission Deadline: October 8, 2026, 4:00pm

Response Submission Deadline: October 15, 2026, 11:00am

3. PROPOSAL PROCEDURES

The City will only be accepting electronic submissions of proposals. Please submit electronic responses via the

City eProcurement Portal: https://procurement.opengov.com/portal/meridenct. By way of the eProcurement

Portal, responses will be locked and digitally encrypted until the submission deadline passes. Proposals are due for submission no later than 11:00 am, Thursday, October 15, 2026.

4. PROPOSALS/QUALIFICATIONS

A. Proposals shall be submitted as one submission: Proposal and Fees.

B. Proposals must be made out and signed in the corporate, or other, name of Proposer, and must be fully and properly executed by an authorized person.

C. Proposals received later than the time and date specified will not be considered.

D. Amendments to or withdrawal of Proposals received later than the date and time set forth in the proposal opening will not be considered.

5. EXAMINATION OF DOCUMENTS

Proposers are to examine all documents and visit the site in order to make a thorough examination of the conditions so that they may familiarize itself with all of the existing requirements, conditions, and difficulties that will affect the execution of the work in order to determine the amount of work necessary to carry out the true intent of the specifications and work shown on the drawings.

The City of Meriden and its agents do not have any responsibility for the accuracy, completeness, or sufficiency of any proposal document obtained from any other source other than from the City eProcurement Portal:

https://procurement.opengov.com/portal/meridenct. Obtaining documents from any other source(s) may result in obtaining incomplete and inaccurate information. Obtaining documents from any other source may also result in failure to receive any addenda, corrections, or other revisions to the documents that may be issued.

No request shall be honored if such request is made less than seven (7) calendar days prior to the date fixed for the opening of proposals. Any and all such interpretations, and any supplementary instructions, will be in the form of a written addenda to the specifications which, if issued, will be made available via the City eProcurement Portal, located at https://procurement.opengov.com/portal/meridenct for addenda. Failure of any proposals to receive any such addenda shall not relieve any proposals from any obligations under its proposal as submitted.

Proposers shall submit all inquiries regarding this proposal via the City eProcurement Portal, located at https://procurement.opengov.com/portal/meridenct. Please note the deadline for submitting inquiries. All answers to inquiries will be posted on the City eProcurement Portal. Proposers may also click “Follow” on this document to receive an email notification when answers are posted. It is the responsibility of the proposer to check the website for answers to inquiries.

6. AWARD OF CONTRACT

The Purchasing Officer reserves the right to reject any or all proposals or parts thereof for any reason, to negotiate changes to proposal terms and to waive minor inconsistencies with the RFP/RFQ. The Purchasing

Officer reserves the right to make a selection on the basis of qualifications, experience in providing similar services elsewhere, the proposal’s responsiveness to the Request For Proposal/Qualifications requirements; and to negotiate a contract with the Consultant(s).

The contract will not be awarded to any corporation, firm, or individual which/who is in arrears to the City of

Meriden by debt or contract, or who is in default as security or otherwise by any obligation to the City of

Meriden.

The right is reserved to reject any or all proposals, in whole or in part, to award any item, group of items, or total proposal, and to waive informality or technical defects, if it is deemed to be in the best interest of the City of Meriden.

For projects exceeding $34,999.00, the city will solicit proposals from multiple contractors within that scope of work.

7. TAXES

The City of Meriden is exempt under Connecticut General Statutes from the payment of the excise taxes imposed by the federal government and the Sales and Use Tax of the State of Connecticut; such taxes should not be included in the proposal price. Upon request, exemption certificates will be furnished to the successful

Proposer.

8. FAIR EMPLOYMENT PRACTICES

The Contractor shall agree that neither it or its subcontractors, except in the case of a bona fide occupational qualification or need, to refuse to hire or employ or to bar or to discharge from employment any individual or to discriminate against such individual in compensation or in terms, conditions or privileges of employment because of the individual's race, color, religious creed, age, sex, gender identity or expression, marital status, national origin, ancestry, present or past history of mental disability, intellectual disability, learning disability, physical disability, including, but not limited to, blindness or status as a veteran. The aforementioned terms are obtained from Connecticut General Statutes Section 46a-60, et seq., entitled “Discriminatory employment practices prohibited,” as amended.

9. NON-COLLUSION STATEMENT

Each proposer submitting a proposal to the City of Meriden for any portion of the work contemplated by the documents on which bidding is based shall execute and attach thereto the sworn Non-Collusive Statement, to the effect that the proposal has not colluded with any other person, firm, or corporation in the submission of the proposal/qualifications.

10. FORM OF AGREEMENT BETWEEN CITY OF MERIDEN AND CONSULTANT

The Agreement for the work will be via Purchase Order and Standard Contractors Services Agreement.

11. CITY OF MERIDEN CODE OF ETHICS

The City of Meriden has adopted a Code of Ethics located in Chapter 21 of the Code of the City of Meriden, sections 21-1 through 21-15, inclusive, which are expressly incorporated herein by reference. The terms of the

Code of Ethics shall constitute a part of any contract or agreement entered into by the City of Meriden as a result of this proposal as if those terms were fully set forth in such contract or agreement.

Proposers are specifically advised that the Code of Ethics prohibits public officers and employees, as well as their immediate families and businesses, with which they are associated from participating in any transaction which is incompatible with the proper discharge of official duties or responsibilities. Proposers are also advised that the Code of Ethics contain provisions with respect to paid contractors and former employees and officials.

PROPOSERS SHOULD NOTE THAT PROPOSALS, CONTRACTS, AND AGREEMENTS ENTERED

INTO OR AWARDED IN VIOLATION OF THE CODE OF ETHICS ARE VOIDABLE BY

RESOLUTION OF THE CITY COUNCIL OF THE CITY OF MERIDEN.

Copies of the Code of Ethics may be obtained from the office of the City Clerk or may be found online on the

City of Meriden’s website.

12. ASSIGNMENT OF CONTRACT

No contract may be assigned without the written consent of the Purchasing Officer or designee.

13. PERMITS

The Contractor shall be responsible for obtaining any and all necessary permits required by the City of Meriden prior to the commencement of work. The Contractor may contact the City of Meriden Building Department for permit information at (203) 630-4091. For all other required permits, contact the City of Meriden Engineering

Department at (203) 630-4018.

**Please note-For City of Meriden Building(s) City Permit Fees will be waived BUT the State Training and

Education Fund Fees/Permit will NOT be waived.

14. PRICE AND PAYMENT

The City of Meriden is exempt from the payment of the excise taxes imposed by the Federal government and the Sales and Use Tax of the State of Connecticut under Connecticut General Statutes; accordingly, such taxes shall not be included in the pricing.

The City of Meriden, unless stated otherwise in the documents or Contract, will make payment to the

Contractor not less than thirty (30) days following completion of services.

15. INSURANCE

The successful consultant shall be required to provide a Certificate of Insurance denoting general liability, automobile liability, workers compensation liability, and other coverage required by the City’s Risk Manager.

16. LICENSES AND CERTIFICATIONS

The successful firm(s) shall ensure that any appropriate licenses or certifications required by the State of

Connecticut are maintained for the duration of the project. The firm must meet all municipal, state and federal affirmative action and equal employment opportunity practices.

17. TERMS AND CONDITIONS

The selected contractors must have the capability to provide the City of Meriden with expertise in performing other functions, such as, but not limited to, preparation of permit applications, liaison functions and clerical assistance. The following are some potential services which the selected Contractor may be required to provide.

It is also understood that the selected contractor will be required to complete all direct or indirect responsibilities associated with the assigned task so that the intent and desired goal of the City can be achieved.

These services may include, without limitation, reviewing specifications, providing individuals or sub-consultants with specialized knowledge, assisting in investigations of technical matters, providing opinions, or conclusions as well as performing various trade work services.

TRADE PROJECT DETAILS

INFORMATION/EXPECTATION

1. Carpenters

Carpenter, Working Supervisor

License or Registrations Requirements: As required by DCP.

Duties: Supervises and coordinates activities of workers engaged in the construction, installation, and repair of structures and fixtures. Layout and install metal studs, hang tape sheetrock, install grid work and ceiling tiles.

Read blueprints. Lays out floor plan and cabinetwork, using rule, square, and calipers. Selects materials and structural units including lumber, prefabricated doors, cabinets and paneling, and inspects to insure conformance with provisions of building code and local ordinance. Determines sequence of activities concerned with fixture assembly, and erection of structure. Assigns workers to such tasks as cutting materials to size, building concrete forms, erecting wood framework, and laying flooring, surface sanding and application of surface sealant. Inspects work performed by subcontractors, including ductwork, wiring, and pipe installation to insure conformance with specifications. Supervise workers engaged in building structures such as cofferdams, trestles, and supports for concrete forms. Prepares cost estimates.

Constructs, erects, installs and repairs structures and fixtures of wood, plywood and wallboard. Installs, assembles, dismantles, moves industrial machinery. Drives piling into ground to provide foundations for structures such as buildings and bridges, retaining walls for earth embankments, such as cofferdams. Fastens wooden, metal or rock board lath to walls, ceilings and partitions of buildings, acoustical tile layer, and concrete form builder. Applies fire stopping materials on fire resistive joint systems only. Installation of curtain/window walls only where attached to wood or metal studs. Installation of insulated material of all types whether blown, nailed or attached in other ways to walls, ceilings and floors of buildings. Assembly and installation of modular furniture/furniture systems. Free-standing furniture is not covered. This includes free standing: student chairs, study top desks, book box desks, computer furniture, dictionary stand, atlas stand, wood shelving, two-position information access station, file cabinets, storage cabinets, tables, etc.

2. Construction Carpenter

License or Registrations Requirements: As required by DCP

Duties: Study specifications in blueprints, sketches or building plans to prepare project layout and determine dimensions and materials required. Build or repair cabinets, doors, frameworks, floors, and other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, and power tools. Install structures and fixtures, such as windows, frames, floorings, and trim, or hardware, using carpenter's hand and power tools. Select and order lumber and other required materials. Maintain records, document actions and present written progress reports. Finish surfaces of woodwork or wallboard in houses and buildings, using paint, hand tools, and paneling.

3. Carpenter, Common Laborer

License or Registrations Requirements: As required by DCP.

Duties: Performs any combination of duties on construction projects, usually working in utility capacity, by transferring from one task to another where demands require worker with varied experience and ability to work without close supervision. 33.7.4. Carpenter, Rough & Finish License or Registrations Requirements: As required by DCP. Duties: Constructs, erects, installs, and repairs structures and fixtures using carpenter’s hand tools and power tools, and conforming to local building codes: studies blueprints, sketches, or building plans for information pertaining to type of materials required, and dimensions of structures and fixtures to be fabricated.

Selects specified type of materials. Prepares layout, using rules, framing square, and calipers. Marks cutting assembly lines on materials, using pencil, chalk, and marking gauges. Shapes materials to prescribed measurements, using saws, chisels, and planes. Assembles cut and shaped materials and fastens them together with nails, dowel, pins or glue. Verifies trueness of structure using plumb bob and carpenter’s level. Erects framework for structures and lays subflooring. Builds stirs and lays out and installs partitions and cabinet work.

Covers subfloor with building paper to keep out moisture and lays hardwood, parquet, and wood-strip-block floors by nailing to subfloor or cementing them to mastic or asphalt base. Applies shock-absorbing, sound-deadening and decorative paneling to ceilings and walls. Fits and installs prefabricated window frames; doors, door weather stripping, interior and exterior trim and finish hardware including locks, letter drops and kick plates. Constructs forms and chutes for pouring concrete. Erects scaffolding and ladders for assembling structures above ground level. Layout and installation of metal studs, and tape sheetrock, install ceiling grid work and ceiling tiles.

4. Drywall Installer and Finisher

License or Registrations Requirements: As required by DCP.

Duties: Provided quality drywall installation for both commercial and residential projects. Read blueprints, technical specification to install materials correctly. Installing drywall to building codes, apply texturing and compound for walls and ceilings, sanding of rough spots. Apply plaster and other construction materials, ensuring quality of work was as per specifications and met or exceeded all installation and finished product guidelines.

5. Electricians (Commercial)

License required: As Required by DCP

Duties: Install, erect, maintenance, alteration or repair of any wire, cable, conduit, etc., which generates, transforms, transmits or uses electrical energy for light, heat, power or other purposes, including the installation or maintenance of telecommunication, network wiring, and low voltage wiring. 33.22.1. Electrician, Working

Supervisor: Duties: Installs, erects, maintains, alters or repairs any wire, cable, conduit, busway, raceway, support, insulator, conductor, appliance, apparatus, fixture or equipment which generates, transforms, transmits or uses electrical energy for light, heat, power or other purposes including the installation or maintenance of telecommunication, network wiring, and low voltage wiring. Coordinate, layout, and oversee the work of others. 33.22.2. Electrician, Journeyperson Electrician: Duties: Same work as an E-1 licensee, but only while in the employment of a Contractor licensed for such work. 33.22.3. Electrician, Apprentice: Duties: Same work as an E-1 or E-2 licensee, but only with direct supervision of an Electrical Contractor licensed through DCP.

6. Fence Services

License or Registrations Requirements: As required by DCP

Duties: Supervises and coordinates activities involved in chain link fence installation, replacement and repair of metal fencing surrounding institutional establishments and residential locations using equipment and tools required to complete the work.

7. Fire Alarm Services

License required: As Required by DCP

Duties: Install, erect, maintenance, alteration or repair of any fire alarm system for City facility. Must be licensed and capable to procure and work with the major fire alarm system distributors (Notifier, FireLite, etc).

8. Flooring

License required: As Required by DCP

Duties: Install, erect, maintenance, alteration or repair flooring of various types such as LVT, Tile, hardwood, carpet, epoxy, or other typical commercial flooring systems. Installation and preparation work shall be per industry standards and manufacturer’s recommendation.

9. General Laborer

License or Registrations Requirements: As required by DCP.

Duties: Cleaning and preparing a job site including sweeping, wash down, mopping, wiping of the construction facility and its furniture, washing, polishing, and dusting. Loading and delivering materials, and using a variety of tools and machines such as blowtorches, forklifts, levels, lifts, power drills, grinders, saws, pressure washers, and water spraying equipment. Set up and take down ladders, scaffolding, and other temporary structures. Work with carpenters, masons, and other specialized contractors.

10. Glaziers

License Requirements:

As required by DCP: FG-1 – (Unlimited Contractor’s license for Flat Glass Work)

The holder of this license may perform the installation, maintenance, or repair of glass in residential or commercial structures. Glazing wood and metal sash, doors, partitions, and 2 story aluminum storefronts.

Installs glass windows, skylights, store fronts and display cases or surfaces such as building fronts, interior walls, ceilings and table tops and metal store fronts. FG-2 – (Unlimited Journeyperson’s License for Flat Glass

Work) The holder of this license may perform the installation, maintenance, or repair of glass in residential or commercial structures only while in the employ of a Contractor licensed for such. Duties: Follow blueprints and specifications, Remove any old or broken glass before installing replacement glass, cut glass to the specified size and shape, using measuring tape, plumb lines, and levels to ensure proper fitting installation. Make or install sashes and moldings for glass installation, fasten glass into sashes or frames with clips, moldings, or other types of fasteners, add weather seal or putty around pane edges to seal joints. Install or replace windows, mirrors, shower doors, and bathtub enclosures. Fit glass for tabletops and display cases. Install items such as room dividers and security windows.

11. Heating & Air Conditioning

License Requirement: As required by DCP

Duties: Installing, servicing and repairing of gas or oil burners for domestic and light commercial installations.

Installation, repair, replacement, maintenance or alteration of any warm air, air conditioning and refrigeration system, including necessary piping for the conveyance of heating or cooling media and associated pumping equipment. Installation, repair, replacement, maintenance or alteration of all refrigeration systems included in food storage, air conditioning, or special process systems. Installation, repair, replacement, alteration, and maintenance of gas piping systems and approved gas appliances, gas utilization equipment and accessories for use with LP gas supplied by gas containers and/or natural gas. Installation, repair, replacement, maintenance or alteration of any apparatus of piping, appliances, devices or accessories for heating systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and oil burner installation and servicing, installation of hot, chilled and condenser water, as well as steam piping in air conditioning systems.

12. Insulation Installer

License or Registrations Requirements: As required by DCP.

Duties: Installing blown-in insulation, batted rolled insulation, foam insulation and insulation. Install insulation for soundproofing, fire stopping systems, insulate pipes, sprinkler pipes, plumbing pipes, heating pipes HVAC ducts, ceilings.

13. Masonry Services

Masonry Services:

License or Registrations Requirements: As required by DCP. Bricklayer:

Duties: Lays building materials, such as brick, structural tile and concrete cinder, glass, gypsum, terra cotta block.to construct or repair walls, partitions, arches, sewers, and other structures: Cuts, tools and sets marble, sets stone, finishes concrete, applies decorative steel, aluminum and plastic tile, applies cements, sand, pigment and marble chips to floors, stairways, etc.

Measures distance from reference points and marks guidelines on working surface to lay out work. Spreads soft bed of mortar that serves as bed and binder for block. Levels, aligns and embeds brick into mortar. Removes excess from face of block and finishes with pointing tool or trowel. Determines vertical and horizontal alignment of courses, using plumb bob, gauge line and level. Fastens brick to terra cotta veneer to face of structures, with tie wires embedded in mortar between bricks, or in anchor holes in veneer brick. May weld metal parts to steel structural members. May apply plaster to walls to complete work. 33.14.2. Cement Mason:

Duties: Smooths and finishes surfaces of poured concrete floors, walls, sidewalks or curbs to specified textures using hand tools or power tools, including floats, trowels and screeds: Signals concrete deliverer to position truck to facilitate pouring of concrete. Moves discharge chute of truck to direct concrete into forms. Spreads concrete into inaccessible sections of forms, using rake or shovel. Levels concrete to specified depth and workable consistency, using hand held screed and floats to bring water to surface and produce soft topping.

Smooths and shapes surfaces to freshly poured concrete, using straightedge and float or power screed. Finishes concrete surfaces, using power trowel, or wets and rubs concrete with abrasive stone to impart finish. Removes rough or defective spots from concrete surfaces, using power grinder of chisel and hammer, and patches holes with fresh concrete or epoxy compound. Molds expansion joints and edges, using edging tools, jointers and straightedge. May sprinkle colored stone chips, powdered steel, or coloring powder on concrete to produce prescribed finish. May produce rough concrete surface, using broom. May mix cement, using hoe or concretemixing machine. May direct mixing of concrete, and setting of forms. May specialize in finishing steps and stairways. May break up and repair old concrete surfaces, using pneumatic tools. 33.14.3. Stonemason:

Duties: Sets stone to build stone structures, such as piers, walls and abutments, or lays walks, curbstones, or special types of masonry, such as alberene (acid-resistant soapstone for vats, tanks and floors), using mason’s tools: Shapes stone preparatory to setting, using chisel, hammer, and other shaping tools. Spreads mortar over stone and foundation with trowel and sets stone in place by hand or with aid of a crane. Aligns stone with plumb line and finishes joints between stone with pointing trowel. May spread mortar along mortar guides to ensure joints of uniform thickness. May clean surface of finished wall to remove mortar, using muriatic acid and brush.

If any of the Performance for this trade affects either the weight bearing or structural integrity of the building being worked on, then Contractor must be registered as a current Major Contractor (General Contractor) with the DCP prior to undertaking any part of the Performance.

14. Painters

Painter, Working Supervisor:

License or Registrations Requirements: As required by DCP.

Duties: Coordinates, plans, estimates and oversees the work of other painters. Painting, decorating, hardwood finishing, paper hanging, drywall painting for any and all types of building and residential work. Applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior and exterior surfaces, trimming and fixtures of buildings, and other structures: smooths surfaces using sand paper brushes, or steel wool and removes old paint from surfaces using paint remover, scraper, wire brush, or blowtorch to prepare surfaces for painting. Fills nail holes, cracks, and joints with putty, plaster, or other filler. Selects premixed paints, or mixes required portions of pigment oil and thinning and drying substances to prepare paint that matches specified colors. Paints surfaces using brushes, spray gun or rollers. Simulates wood grain, marble, brick or tile effects.

Applies paint with cloth, brush, sponge, or finers to create special effects. Erects scaffolding or sets up ladders to perform tasks above ground level.

15. Plumbers

License Requirements: as required by DCP.

Plumber Supervisor

Duties: Installation, repair, replacement, alteration or maintenance of all plumbing, heating, cooling and piping.

Installs, repairs, replaces, alters or maintains gas, water, and associated fixtures, laboratory equipment, sanitary equipment, other than subsurface sewage disposal systems, all water systems for human usage, sewage treatment facilities and all associated fittings within a building and lateral storm and sanitary lines from building to the mains, swimming pools and pumping equipment, makes connections to back flow prevention devices, and works with low voltage wiring, not exceeding twentyfour volts, used within a lawn sprinkler system.

Installation, repair, replacement, alteration or maintenance of those portions of a solar hot water heating system, which include the basic domestic hot water tank and the tiein to the potable water system. 33.26.2. Plumber, Journeyperson Duties: Same work as the P-1 licensee, but only in the employ of a Contractor licensed for such work. Assembles, installs, and repairs pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes: studies building plans and working drawings to determine work aids required and sequence installations. Inspects structure to ascertain obstructions to be avoided to prevent weakening of structure resulting from installation of pipe. Locates and marks position of pipe connections and passage holes for pipe in walls and floors, using ruler, spirit level, and plumb bob. Cuts openings in walls and floors to accommodate pipe and pipe fittings, using hand tools and power tools. Cuts and threads pipe, using pipe cutters, cutting torch, and pipe threading machine. Bends pipe to required angle by use of pipe-bending machine or by placing pipe over block and bending it by hand. Assembles and installs valves, pipe fittings, and pipes composed of metals, such as iron, steel, brass, and lead and nonmetals, such as glass, vitrified clay, and plastic, using hand tools and power tools. Joins pipes by use of screws, bolts, fittings, solder, plastic solvent and caulk joints. Fills pipe system with water or air and reads pressure gauges to determine whether the system is leaking. Installs and repairs plumbing fixtures, such as sinks, commodes, bathtubs, water heaters, hot water tanks, garbage disposal units, dishwashers, and water softeners. Repairs and maintains plumbing by replacing washers in leaky faucets, mending burst pipes and opening clogged drains. May weld holding fixtures to steel structural members.

16. Roofing Services

License or Registrations Requirements: As required by DCP.

Duties: Covers roofs with composition shingles or sheets, wood shingles, slate or asphalt and gravel to waterproof roofs, including preparation of surface. (Demolition or removal of any type of roofing and or clean-up of any and all areas where a roof is to be re-laid.) Covers roofs with roofing materials other than sheet metal, such as composition shingles or sheets, wood shingles, or asphalt and gravel, to waterproof roofs: Cuts roofing paper to size, using knife, and nails or staples it to roof in overlapping strips to form base for roofing materials.

Aligns roofing material with edge of roof, and overlaps successive layers, gauging distance of overlap with chalk line, gauge on shingling hatchet, or by lines on shingles. Fastens composition shingles or sheets to roof with asphalt, cement, or nails. Punches holes in slate, terra cotta, or wooden shingles, using punch and hammer.

Cuts strips of flashing and fits them into angles formed by walls, vents, and intersecting roof surfaces. When applying asphalt or tar and gravel to roof, mops or pours hot asphalt or tar onto roof base. Applies alternate layers of hot asphalt or tar and roofing paper until roof covering is as specified. Applies gravel or pebbles over top layer, using rake or stiff-bristled broom. May attach shingles to exterior walls and apply roofing paper and tar to shower pans, decks, and promenades to waterproof surfaces. May remove existing roofing materials to prepare for new roof. Includes repairs to all types of commercial roofing systems including, but not limited to the following: Asphalt build-up, coal-tar buildup, and single ply EPDM. Capable of effecting repairs to flashing/coping systems including, but not limited to the following: KMM, fabric, metal and EPDM.

17. Security/Data Services-Electrical

License required: As Required by DCP

Duties: Install, erect, maintenance, alteration or repair of low voltage security wiring and/or data wiring and associated hardware. This includes, but is not limited to, CAT5/CAT6 wiring, camera installation and integration, IT equipment installation and integration, card reader systems and applicable wiring/integration.

Contractor shall be licensed and capable of procuring and installing S2 Card reader systems, APEX cameras, and installation/integration of Milestone video services.

18. Siding

License or Registrations Requirements: As required by DCP.

Duties: Install siding per specifications and schematics for commercial and residential buildings. Conducted site surveys prior to installation, taking necessary measurements. Prep exterior for siding installation including any needed repairs, prepares underlying surface prior to installation, makes any needed repairs to underlying surface, uses tools of all types including cutting machinery and measurement instruments.

19. Sprinkler Fitters

License as required by DCP

Installation, alteration, maintenance and repair of fire protection sprinkler systems.

20. Welding Fabrication

License as required by DCP.

Installation, alteration, maintenance and repair of metal fabrication services. This includes, but is not limited to, fencing, railings, and structural metal components.

EVALUATIONS/QUALIFICATIONS

No. Evaluation Criteria Scoring Method Weight (Points)

1. Qualifications of the individual or Firm/Cost

Proposal Points Based 30

(30% of Total)

2. Demonstrated ability to meet project deadline. Proposed work schedule.

Timeframe for delivery of service.

Points Based 30 (30% of Total)

3. References of past clients. Points Based 20 (20% of Total)

4. Financial responsibility and stability Points Based 20 (20% of Total)

VENDOR SUBMISSION FORMS

1. NON-COLLUSIVE STATEMENT/AFFIDAVIT*

Please download the below documents, complete, and upload. MUST BE Notarized and Stamped/Sealed.

• Non-Collusive_Bid_Statement...

*Response required

2. PROPOSERS QUALIFICATION STAEMENT*

Please download the below documents, complete, and upload.

• Proposers_Qualification_Sta...

*Response required

3. PROPOSAL & FEES*

*Response required

4. Additional Information https://government-project.s3.us-west-2.amazonaws.com/196784/702c7dfa-5aaa-4f75-8268-1eb67e4e69da_Non-Collusive_Bid_Statement.pdf https://government-project.s3.us-west-2.amazonaws.com/304769/85ab92f9-3eee-4dc9-b515-052d3d3daf36_Proposers_Qualification_Statement.pdf