RFQ_Specfications_Amphibious_Track_Vehicle_Specs.pdf

SPECIFICATIONS

Project: Purchase of Amphibious Track Vehicle, Trailer and

Rotary Cutter Attachment

NOTE

1. Product Features:

Name of Item: Marsh Master, Trailer and Rotary Cutter Attachment

Manufacturer: Coast Machinery

Model Number: MM-2MX-KC amphibious track vehicle, MM-2 Galvanized tilt deck trailer with electric brakes, MM-2-LX Hydraulic driven rotary cutter.

Salient Characteristics: See below

BODY:

• 15' 10" Long (minimum) x 8'-0" Wide (maximum) x

7' IO" High (maximum)

• All Welded 1/8" Aluminum Body with 3/16" High Strength Pontoon Bottoms

• 7000 LB (maximum machine weight)

• 1300 lb. Floating Load Capacity

• Overhead Rack/Brush guard, and Windshield

• Walking deck full width of the tracks with slip resistant coating on decks

• 32" Ground Clearance (minimum)

• All Stainless-Steel Fasteners throughout machine

• Minimum 25 Gallon secured aluminum fuel tank mounted in rear bed area easily accessible and serviceable

• Rear mounted hydraulic three-point hitch with quick tach system

• Overhead cargo rack (capable of supporting minimum of 100 lb. of gear)

• Catwalk over winch

• (2) plugs installed in the floorboard of the driver and passenger floorboard for drain purpose.

DRIVE SYSTEM:

• Kohler 2504 TCR 74 HP 4-cylinder water Cooled Turbo diesel.

• TIER 4 FINAL CERTIFIED MEETING ALL REQUIREMENTS SET FORTH

BY THE EPA FOR 2019 OFF ROAD DIESEL ENGINES

• Twin Hydrostatic Transmission

• Oil bath lubricated low speed/high torque final drives that requires NO external greasing of bearings

• Thermostatic controlled hydraulic driven cooling fan with reversing feature for radiator/oil cooler cleanout

• Side by side radiator/hydraulic oil cooler

SPEED:

• 8 mph minimum on land, 1 mph minimum in water

TRACK SYSTEM:

• Maximum 28" Wide Aluminum Cleats on 4" centers

• Two Wide Low Stretch Rubber Belts per Track

• Four Rows of Urethane Drive Lugs/Track Guides per Track

• Four UHMW Drive Sprockets per Track

• Eighteen urethane Bogie Wheels per Track

• Nine oil bath lubricated bogey axle assemblies per pontoon. Must be internally oil bath lubricated and sealed requiring no external greasing.

• All corrosion-proof stainless-steel track bolts and hardware for saltwater usage

• No external grease points anywhere on rear drive or bogey system

• Front idler shafts and rear drive shafts to be stainless steel.

ELECTRICAL SYSTEM:

• Minimum 12 Volt Battery Secured in Enclosed Compartment

• Multifunction engine display

• Minimum (2) LED Front Lights and (2) LED Rear Lights

• Battery cut-off switch

WINCH-JACK:

• Front Mounted 10,000lb Hydraulic Winch with 75' of 7/16" cable (minimum)

• Weight rated jack to lift the machine

FIRE SUPPRESSION SYSTEM

• Minimum (2)- 55-gallon Aluminum Water Tank built into each pontoon

• Water Level Gauge for Tanks (Mounted in cab)

• Hydraulic Motor Driven, Self-priming Centrifugal High- Volume Water Pump

• Minimum 15' 1 1/2 Suction Hose for quick fill

• Minimum 25' 1 1/2" Discharge Hose

• Fog & Stream Spray Nozzle

• Camlock Hose Connections for Pump

LOW FLOW AND HIGH FLOW AUXILIARY HYDRAULIC CIRCUITS:

• Low flow auxiliary hydraulic circuit 3-8gpm@3000psi and 2000 rpm (for spraying water)

• High flow auxiliary hydraulic circuit 30 GPM max @ 3500 psi/2600 rpm (for cutter attachment)

MACHINE/ENGINE WARRANTY:

• Factory Direct

• 1 Year or 1000 hr. warranty

• Engine warranty 3yr or 2000 hr. 100% parts and labor

TRAILER SPECIFICATIONS:

• Maximum 8' wide x 18' long tilt deck (max deck height 38", maximum overall length 27')

• 2" x 1O" #1 treated deck

• (2) 7000 lb top mount, high profile torsion bars

• Machine access ladder

• Load range E 235/75Rl6 commercial tires, with galvanized rims

• Matching spare tire and rim, mounted on trailer

• 12" - 8 on 6.5 - electric brakes

• Electric brake actuator with breakaway

• 2 5/16" forged adjustable coupler

• Minimum GVWR of 13,000 lbs.

• Minimum 5000# tongue jack

• Manual tilt 3" hydraulic cylinder with dampener

• Galvanized steel frame with 6" channel

• Four (4) D-ring tie downs

• 2 galvanized safety chains per DOT specs

• Light package with (4) LED stop/tail, (4) 2" amber clearance lights and (7) red clearance lights

• Reflector package with (4) 2" red and (2) 2" amber and reflective tape side and rear per

DOT standards

• 7 pin round lug light connector

• 4 tie down straps weighted for the machine to secure machine to the trailer

CUTTER ATTACHMENT:

• Cutting Width: 76"

• Cutting Capacity: 2" diameter material

• Cutting Heads: Two (2) 38" diameter

• Blades: Two (2) per cutting head; 1/2" x 3" x 11 1/2" heat treated steel

• Blade Tip Speed: 17,000 fpm

• Spindle Speed: Approx. 1400 rpm

• Spindles: Two (2) extra heavy duty with Timken Taper Roller Bearings

• Spindle seals well protected from wrap up, grease lubricated

• Drive Motors: Two (2), 1 per cutting head, rated @ 50 hp max power input

• Hydraulic Flow: 30 gpm

• Deck: 1/4" thick 5086 aluminum, with 3/8" thick 6061-T6 aluminum pivot mounts and side slider frame

• Heavy duty height adjustable skis for supporting cutter deck (2" - 6" cutting height)

• Replaceable wear pads on ski bottoms

• Approximately 710 lbs

• Rear cutter 3-point hitch.

• Hydraulic with mechanical controls

• Auto shutdown when cutter head is tilted up

• Foot Switch at operator seat in cab must be depressed to power cutter head

• Push/pull dash mounted switch to engage cutter

• Built in hydraulic blade brake that stops blades from free spinning after shutdown

• Quick-connect hydraulic hoses

• Quick-attach pull frame

• 1 minute attach/detach time

4. Installation:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.

CONTRACTING POC: Renee Babineau, Contract Specialist, (404) 679-7349, Renee_Babineau@fws.gov

Technical Point of Contact (POC):

Benjamin Stewart – 928-920-1302 / benjamin_stewart@fws.gov