RFQ Event 168 Steam Kettle V2.docx
DOCX document 26 KB Posted
- Attached to
- IDYCA - Steam Kettle RFQ
- Solicitation number
- 168
- Issued by
- Canyon County, Idaho
About this file
This document is a Request for Quotation (RFQ) from the Idaho Division of Purchasing on behalf of the Idaho Military Division (IMD) for a 20-gallon electric stationary steam kettle. The required specifications include a stainless steel interior and exterior, a stainless steel liner, a perforated strainer, a spring-assisted hinged cover, a faucet bracket, a 2/3 jacket with thermostatic control and a two-foot draw-off, and a tri-leg base with flanged feet. The equipment must be 23 2/3"W x 33"D x 60"H and have 208V, 12KW, 3-phase, hard-wired electrical requirements. The vendor must deliver the steam kettle to the Idaho Youth Challenge facility located in Pierce, ID by December 1, 2023. The award will be made to the responsive, responsible vendor with the lowest total cost, as entered in the IPRO LUMA system prior to the deadline.
The document outlines the required submittal items, which include the State of Idaho Signature Page, equipment specifications, and manufacturer warranty information. The facility will handle the installation of the new equipment and removal of the old equipment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard-Terms-and-Conditions_May-2021.pdf | ||
| Insurance Requirements.docx | DOCX document | |
| Signature-Page-RFQ.docx | DOCX document | |
| solicitation_instructions+Jan+2017.pdf | ||
| RFQ_Event 206 Microsoft eLearning Tools.docx | DOCX document | |
| Insurance Requirements 2023.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Department of Administration IDYCA - Steam Kettle Event 168
Purpose Idaho Division of Purchasing on behalf of the Idaho Military Division (IMD) is requesting quotes for Steam Kettle, as further detailed below.
The contact for this RFQ is:
Jonathan Gray, Buyer Division of Purchasing Phone: (208) 332-1615 E-mail: Jonathan.gray@adm.idaho.com
Background The Idaho Youth Challenge Academy is in need of a replacement twenty (20) gallon electric stationary steam kettle to be used in their dining facility.
Time lines Quotes Due (by XXXXX, XXXX 5:00 p.m. MT)
Specifications Crown Steam EL-20, twenty (20) Gallon Electric Steam Kettle, or equivalent.
1.1 Must have a Stainless Steel Interior and exterior
1.2 Must have a Stainless Steel Liner
1.3 Must have a Perforated Strainer
1.4 Must have a Spring Assisted Hinged Cover
1.5 Must have a Faucet Bracket
1.6 Must have a 2/3 Jacket, Thermostatic Control and two foot (2’) Draw-off
1.7 Must have a Tri-Leg Base with Flanged Feet
1.8 Equipment must be 23 2/3”W X 33 ¼”D X 60 ½” H, offered equipment must not be larger than specified.
1.9 Electrical must be 208V, 12KW, 3-Phase, Hard wired
Delivery Contractor must deliver the Steam Kettle, to FOB Destination, on or before 12/01/2023 or as coordinated with the Agency contact. IMD contact for delivery is:
IMD Contact: Kelly Cowger Phone: 208-464-1488 E-mail: kcowger@idyouthchallenge.com The facility will handle installation of the new equipment, and removal of the old equipment.
Location: Idaho Youth Challenge 117 Timberline Dr Pierce, ID 83546
Award Basis Award will be made to the responsive responsible vendor with the lowest Total Cost, as provided on IPRO LUMA
Response Enter your Total Cost under lines in IPRO (IPRO LOGIN Powered by LUMA), so that it is received by Idaho Division of Purchasing prior to deadline established above
Quotes must include all Required Submittal Items (See below).
If submitting via IPRO enter your Total Cost in IPRO, and UPLOAD all Required Submittal Items.
| List of Attachments |
| Required Submittal Items |
| State of Idaho Signature Page |
| Equipment Specifications |
Manufacturer Warranty Information State of Idaho Signature Page
File details come from the government source that posted it. Updated .