Replace CT Flooring and NS - FINAL - Drawings-r.pdf

PDF 17 MB Posted Aug 27, 2021

Attached to: Z2DA--Replace CARES Tower Flooring & Nurse Stations (541-21-202) Federal contract opportunity
Solicitation number: 36C25021B0040
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10

About this file

Written by GovTribe AI · Dec 27, 2023

This file provides details on a federal contract opportunity to replace flooring and nurse stations. The related solicitation seeks to increase physical security through replacing flooring and nurse stations at the CARES Tower for the Veterans Health Administration Veterans Integrated Service Network 10. Solicitation number 36C25021B0040 has a response due date of May 21, 2021 to replace flooring and nurse stations as part of the IRM Physical Security Project numbered 541-19-102, issued by the Department of Veterans Affairs. The opportunity aims to upgrade security by renovating flooring and work areas for nurses within the CARES Tower facility operated by VHA VISN 10.

View the file

Other files for this federal contract opportunity

Other files attached to Z2DA--Replace CARES Tower Flooring & Nurse Stations (541-21-202), newest first.
File	Type	Posted
36C25021B0040 0002.docx	DOCX document	Sep 21, 2021
Replace CARES Tower Flooring - Conference Line.pdf	PDF	Sep 21, 2021
Replace CARES Tower Flooring - Prebid RFI Answers.pdf	PDF	Sep 21, 2021
Replace CARES Tower Flooring - Site Visit Information.pdf	PDF	Sep 21, 2021
Prebid Site Visit Information.pdf	PDF	Aug 27, 2021
Wage Determination General Decision Number OH20210074 8-6-2021.pdf	PDF	Aug 27, 2021
36C25021B0040 0001.docx	DOCX document	Aug 27, 2021
Replace CARES Tower Flooring and Nurse Stations - BID ISSUE SUBMISSION - SPECIFICATIONS (Revised).pdf	PDF	Aug 27, 2021
Replace CARES Tower Flooring and Nurse Stations - BID ISSUE SUBMISSION - DRAWINGS (Revised).pdf	PDF	Aug 27, 2021
36C25021B0040_1.docx	DOCX document	Aug 27, 2021
Replace CT Flooring and NS - FINAL - SPECS-r.pdf	PDF	Aug 27, 2021
Wage Determination General Decision Number OH20210074 7-30-2021.pdf	PDF	Aug 27, 2021
Replace CT Flooring and NS - Brand Name Spreadsheet.pdf	PDF	Aug 27, 2021

Show all 13

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

TITLE SHEET & DRAWING

INDEX

SITE KEY PLAN

NTS

10701 EAST BLVD. CLEVELAND, OH. 44106

DEPARTMENT OF VETERANS AFFAIRS MEDICAL CENTER - WADE PARK

Cleveland Veterans Affairs

Medical Center

REPLACE CARES TOWER FLOORING & NURSE STATIONS

DRAWING INDEX

PROJECT NO. 541-21-202

GI-1 TITLE SHEET & DRAWING INDEX

ARCHITECTURAL

A-SB PHASE 1: SUB-BASEMENT LEVEL A - DEMOLITION/IMPROVEMENT & FINISH PLANS

A-100A PHASES 2-4: BASEMENT LEVEL B - DEMOLITION/IMPROVEMENT PLANS

A-100B PHASES 2-4: BASEMENT LEVEL B - FINISH PLAN, MILLWORK ELEVATIONS & PHOTOGRAPHS

A-101 PHASE 5: LEVEL 1 - DEMOLITION/IMPROVEMENT & FINISH PLANS, MILLWORK ELEVATIONS, & PHOTOGRAPHS

A-102A PHASES 6 & 7: LEVEL 2 - DEMOLITION/IMPROVEMENT PLANS

A-102B PHASES 8-10: LEVEL 2 - DEMOLITION/ IMPROVEMENT PLANS & FLOORS 2-5 NURSE STATION MILLWORK ELEVATIONS

A-102C PHASES 6-10: LEVEL 2 - FINISH PLAN & MILLWORK ELEVATION

A-103A PHASES 11 & 12: LEVEL 3 - DEMOLITION/IMPROVEMENT PLANS

A-103B PHASES 13-15: LEVEL 3 - DEMOLITION/ IMPROVEMENT PLANS & FINISH PLAN

A-104A PHASES 16 & 17: LEVEL 4 - DEMOLITION/IMPROVEMENT PLANS

A-104B PHASES 18-20: LEVEL 4 - DEMOLITION/ IMPROVEMENT PLANS & FINISH PLAN

A-105A PHASES 21 & 22: LEVEL 5 - DEMOLITION/IMPROVEMENT PLANS

A-105B PHASES 23-25: LEVEL 5 - DEMOLITION/ IMPROVEMENT PLANS & FINISH PLAN

A-106A PHASE 26: LEVEL 6 - DEMOLITION/IMPROVEMENT PLANS

A-106B PHASES 27 & 28: LEVEL 6 - DEMOLITION/ IMPROVEMENT PLANS & MILLWORK ELEVATIONS

A-106C PHASES 26-28: LEVEL 6 - FINISH PLAN & PHOTOGRAPHS

A-600 MILLWORK SECTIONS

A-601 MILLWORK SECTIONS AND DETAILS & FINISH SCHEDULE

A-602 REFERENCE PHOTOGRAPHS - TYPICAL NURSE STATION MILLWORK

FINAL CDs SUBMISSION

11.9.20

CLEVELAND VAMC:

CARES TOWER

NORTH

I. PROJECT LOCATION: CLEVELAND VETERANS AFFAIRS MEDICAL CENTER

10701 EAST BLVD.

CLEVELAND, OHIO

II. DESCRIPTION & USER GROUP CLASSIFICATION OF BLDG

A. NATURE OF PROJECT: REPLACEMENT OF FLOORING AND MILLWORK REPAIRS @

CARES TOWER NURSE STATION MILLWORK

B. DESIGN CODES: 2018 NFPA LIFE SAFETY CODE 101, IBC 2018

C. USE GROUP: MIXED USE GROUPS IN HOSPITAL (I-2/S/B) - NO CHANGE

PROPOSED

D. CONSTRUCTION TYPE: TYPE I -332, IB - NON-COMBUSTIBLE, PROTECTED

FIRE RATED CONSTRUCTION (LSC A.8.2.1.2)

EXTERIOR BEARING WALLS 3 HRS

INTERIOR BEARING WALLS 3 HRS

STRUCTURAL COLUMNS 3 HRS (SUPPORTING > 1 FLOOR)

2 HRS (SUPPORTING 1 FLOOR ONLY)

2 HRS (SUPPORTING ROOF ONLY)

BEAMS, GIRDERS, TRUSSES 3 HRS (SUPPORTING > 1 FLOOR, COLS.,

OR BEARING WALLS

2 HRS (ALL OTHERS)

FLOOR-CEILING ASSEMBLIES 2 HRS

ROOF-CEILING ASSEMBLIES 1

HRS

INTERIOR NON-BEARING WALLS 0 HRS

EXTERIOR NON-BEARING WALLS 0 HRS

WALL ASSEMBLIES

EXIT ACCESS CORRIDOR WALLS 0 HR SMOKE PARTITIONS

E. PROJECT AREA: SEE PLANS

F. PROJECT AREA OCCUPANT LOAD:

G. FIRE PROTECTION: EXISTING BUILDING FULLY SPRINKLED AND WILL

REMAIN AS A PART OF THIS PROJECT. FIRE

PROTECTION SYSTEM DESIGN NOT IN SCOPE OF WORK

CODE INFORMATION

DESIGN DEVELOPMENT SUBMISSION 8.10.20

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

F i l e

P a t h

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 6 7 8 9 10

REPLACE CARES TOWER

FLOORING & NURSE STATIONS

10701 EAST BLVD. CLEVELAND, OHIO

541-21-202

NICK CARROZZA

CJK KKERevisions: Date:

E T

RET

HCRA

KACZMAR

STANLEY

NO. 4988

E R

ATE

T C

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

G1-1

FINAL CDs SUBMISSION

11.9.20

65% CDs SUBMISSION 10.15.20

CONSTRUCTION TIMEFRAME:

PRE-CONSTRUCTION: 60 DAYS

SUB-BASEMENT LEVEL A

PHASE 1: 5 DAYS

TOTAL TIMEFRAME: 5 DAYS

NOTE: SUB-BASEMENT LEVEL A IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM.

DAILY WORK SHALL BE PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED

BY 6 PM.

BASEMENT LEVEL B

PHASE 2: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 3: 7 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 4: 7 DAYS

TOTAL TIMEFRAME: 25 DAYS

NOTE: BASEMENT LEVEL B IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY

WORK SHALL BE PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

1ST FLOOR

PHASE 5: 5 DAYS

TOTAL TIMEFRAME: 5 DAYS

NOTE: THE 1ST FLOOR IS A NON-RESIDENTIAL FLOOR WITHOUT QUIET HOURS. PATIENT HEARING TESTS

ARE PERFORMED DURING THE DAY. ANY SANDING, GRINDING OR OTHER LOUD SIMILAR OPERATIONS

SHALL OCCUR ON EVENING/NIGHT SHIFT HOURS. REMAINING WORK CAN BE PERFORMED DURING DAY

SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

2ND FLOOR

PHASE 6: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 7: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 8: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 9: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 10: 5 DAYS

TOTAL TIMEFRAME: 35 DAYS

NOTE: 2ND FLOOR IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY WORK

SHALL BE PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

(REFER TO DEDUCT ALT. 1, THIS FLOOR)

3RD FLOOR

PHASE 11: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 12: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 13: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 14: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 15: 5 DAYS

TOTAL TIMEFRAME: 35 DAYS

NOTE: 3RD FLOOR IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY WORK

SHALL BE PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

4TH FLOOR

PHASE 16: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 17: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 18: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 19: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 20: 5 DAYS

TOTAL TIMEFRAME: 35 DAYS

NOTE: 4TH FLOOR IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY WORK SHALL BE

PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

5TH FLOOR

PHASE 21: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 22: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 23: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 24: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 25: 5 DAYS

TOTAL TIMEFRAME: 35 DAYS

NOTE: 5TH FLOOR IS A RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY WORK SHALL BE

PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

6TH FLOOR

PHASE 26: 5 DAYS

VA ACTIVATION PERIOD: 2 DAYS

PHASE 27: 5 DAYS

VA ACTIVATION PERIOD: 3 DAYS

PHASE 28: 5 DAYS

TOTAL TIMEFRAME: 20 DAYS

NOTE: 6TH FLOOR IS A PSYCHIATRIC RESIDENTIAL FLOOR WITH QUIET HOURS FROM 10PM UNTIL 6 AM. DAILY

WORK SHALL BE PERFORMED DURING DAY SHIFT HOURS STARTING AT 8 AM AND BE COMPLETED BY 6 PM.

THE TIMEFRAMES IDENTIFIED ABOVE ARE IN REFERENCE TO NORMAL CONSTRUCTION ACTIVITIES

AND, UNLESS APPROVED BY VA COR OR DESCRIBED ABOVE, SHALL NOT APPLY TO WORK

INCLUDING BUT NOT LIMITED TO:

· UTILITY SHUTDOWNS

· EXISTING MEP SYSTEM SHUTDOWNS

· WORK IN PUBLIC CORRIDORS/WAITING AREAS

· WORK OUTSIDE OF TEMPORARY CONSTRUCTION PARTITIONED AREAS, INCLUDING

REPLACEMENT OF EXISTING FINISHES

· CONSTRUCTION OF TEMPORARY BARRIERS

WORK IDENTIFIED ABOVE SHALL OCCUR EITHER IN THE EVENING SHIFT, OR IF REQUIRED BY THE

VA, ON WEEKENDS. ALL CONSTRUCTION ACTIVITIES AND SCHEDULES MUST BE REVIEWED AND

APPROVED BY VA COR. REFER TO SPEC DIVISION 01 FOR GENERAL PROJECT REQUIREMENTS

FINAL CDs SUBMISSION 11.9.20

THE SCOPE OF WORK DESCRIBED IN THIS DRAWING PACKAGE REPRESENTS A MULTI-PHASED PROJECT THAT MUST BE UNDERTAKEN SIMULTANEOUSLY WITH THE FULL OCCUPANCY AND FUNCTION OF THE EXISTING

HOSPITAL. IT IS THE INTENT OF THE PROJECT THAT WORK BE PERFORMED ON A FLOOR-BY-FLOOR BASIS, WITH CONSTRUCTION ACTIVITIES OCCURRING ONLY ON ONE FLOOR AT A TIME.

ACTIVATION PERIODS ARE INDICATED TO PERMIT THE VA TIME TO MOVE/RELOCATE EXISTING EQUIPMENT AND FURNITURE OUT OF CONSTRUCTION AREAS. NOTE: IT IS REQUIRED THAT ALL VA ACTIVATION PERIODS

MUST OCCUR DURING THE WEEK AND NOT ON WEEKENDS. CONSTRUCTION PHASES MAY OCCUR ON WEEKENDS ACCORDINGLY.

THE PROPOSED PHASING DURATION PLAN IS AS FOLLOWS:

TOTAL CONSTRUCTION TIMEFRAME: 255 DAYS

AutoCAD SHX Text

EAST BLVD.

AutoCAD SHX Text

E. 105 ST.

AutoCAD SHX Text

EAST BLVD.

AutoCAD SHX Text

MAGNOLIA DR.

AutoCAD SHX Text

HAZEL DR.

AutoCAD SHX Text

E. 108 ST.

AutoCAD SHX Text

MT. SINAI DR.

AutoCAD SHX Text

MARTIN LUTHER KING DR.

AF153

AF152

AF151AF145

AF150

AF149

AF147

AF148

AF146

AF144

AFC05A

AF143

AF141

AF142

AF140

AF139

AF138

AF177

AF178

AF179

AF180

AF181

AF182

AF176

AF183

AF184

AF191 AF192

AF190

AF189

AF188

AFC01A

AF193AF100

AF101

AF102 AF103

AF175

AF174

AF211

AF160

AF161

AF162

AF173

AF155

AF154

AF124

AF123

AF172AF172

AF171

AF170

AFC03A

AF137

AF136

AF185

AF186

AF187

AFC03B

AFC03C

AFC03E

AFC03D

AF210

AFELC2

AF133

AF132

AF135

AF134

AF131

AF104 AF105

AF106

AF111

AF116

AF122

AF121

AF120

AF119

AF130

AF118 AF117

AF114 AF115

AFC02E

AF113 AF112

AF109 AF110

AF108 AF107

AFC02F

AF200

AF201

AF202

AFC06E

AF218

AF217

AF216

AFC06D

AF203

AFELC1

AF204

AF205

AF206CAF206B

AF206D AF206A

AF206

AF208

AF207

AFLVC2

AFLVC1

AF212

AF213

AF214

AF215

AFC02A

AF209

AFC03F

AF148B

AF163AFC06A

AFS1

AFS2

AFS3

STAIR S1

STAIR S2

STAIR S3

P2 P3

OIT Telecom/ Data Closet

WORK TABLE

60" X 36"

FUME HOOD

TABLE

48" X 30"

TRASH

FLAM ST.

CABINET

20" X 23"

FLAM ST.

CABINET

20" X 23"

WORK

TABLE

58" X 23"

WORK

TABLE

58" X 23"

WIRE

SHELF

36" X 18"

SHELF

36" X 18"

WORK

TABLE

60" X 36"

CABINET

36" X 20"

WORK

BENCH

40" X 24"

CABINET

36" X 18"

WORK

TABLE

60" X 36"

TOOL

CART

30" X 28"

CABINET

36" X 21"

WORK

TABLE

60" X 36"

SHELF

36" X 14"

CABINET

36" X 21"

CABINET

36" X 18"

WIRE

SHELF

36" X 18"

SHELF

36" X 18"

TABLE

58" X 23"

SCOPE OF WORK BOUNDARY

A-SB

2,3

PHASE 1: SUB-BASEMENT LEVEL A -

DEMOLITION/IMPROVEMENT & FINISH

PLANS

DESIGN DEVELOPMENT SUBMISSION

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

F i l e

P a t h

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 6 7 8 9 10

REPLACE CARES TOWER

FLOORING & NURSE STATIONS

10701 EAST BLVD. CLEVELAND, OHIO

541-21-202

NICK CARROZZA

CJK KKERevisions: Date:

E T

RET

HCRA

KACZMAR

STANLEY

NO. 4988

E R

ATE

T C

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

A-SB

FINAL CDs SUBMISSION

11.9.20 8.10.20

1/16" = 1'-0"

OVERALL PLAN

CARES TOWER: SUB-BASEMENT A

A-SB.A

GENERAL NOTES:

1. CONSIDER ALL AREAS OWNER-OCCUPIED, UNLESS OTHERWISE NOTED.

2. ALL WALLS ARE DRAWN AND DIMENSIONED TO A 5" NOMINAL WIDTH

TYPICAL UNLESS OTHERWISE NOTED. ALL DIMENSIONS ARE CLEAR

DIMENSIONS FROM FACE OF GYPSUM BOARD TO FACE OF GYPSUM

BOARD

3. ALL SUB-CONTRACTORS TO DESIGN AND INSTALL SYSTEM PER OWNER

REQUIREMENTS AND IN STRICT ACCORDANCE WITH THE

REQUIREMENTS OF ALL APPLICABLE CODES.

4. PATCH AND REPAIR ALL EXISTING AREAS TO REMAIN AS REQUIRED TO

MATCH EXISTING CONDITIONS.

5. ALL DAMAGE TO EXISTING AREAS OCCURING AS A RESULT OF

CONSTRUCTION SHALL BE REPAIRED. CONTRACTOR SHALL PROTECT

ALL EXISTING WALL, CEILING, AND FLOOR FINISHES IN EACH AREA. ANY

SURFACES DAMAGED BY CONTRACTOR SHALL BE REPLACED BY THE

CONTRACTOR AT NO ADDITIONAL COST TO OWNER.

6. ALL NEW PENETRATIONS IN FIRE RATED ASSEMBLIES TO MAINTAIN FIRE

RATING OF ASSEMBLY AS REQUIRED.

13. ALL FLOOR, WALL, CEILING, AND MISC. FIRE RESISTIVE ASSEMBLIES

AND CONSTRUCTION SHALL BE OF THE FIRE RATING CALLED FOR ON

THE DRAWINGS AND / OR AS REQUIRED BY CODE. ALL EXISTING FIRE

RESISTIVE ASSEMBLIES SHALL BE MAINTAINED AND THE RATING NOT

COMPROMISED. FIRE RATED ASSEMBLIES AND CONSTRUCTION

INCLUDING ALL FIRE STOPPING, FIRE RATED DOORS AND MISC. FIRE

RESISTIVE REQUIREMENTS SHALL BE LEFT UNCONCEALED AS

REQUIRED FOR INSPECTION BY THE BUILDING OFFICIAL.

7. FURNITURE SHOWN FOR REFERENCE ONLY. THE VA SHALL BE

RESPONSIBLE FOR REMOVING, PRIOR TO CONSTRUCTION, ALL ITEMS

THAT THE VA DESIRES TO SALVAGE. ALL ITEMS TO REMAIN IN SPACE

SHALL BE PROTECTED BY THE CONTRACTOR THROUGHOUT

CONSTRUCTION.

8. CONTRACTOR SHALL PROVIDE DUST REMOVING WALK-OFF MATS

(TACKY MAT) AT ALL CONSTRUCTION ENTRY POINTS

9. CONTRACTOR SHALL PROVIDE HEPA FILTERED NEGATIVE AIR

MACHINE(S) TO MAINTAIN NEGATIVE PRESSURE IN WORK AREA

ENSURING NO DUST OR FUMES WILL BE TRANSFERRED TO OCCUPIED

AREAS. PROVIDE VISUAL PRESSURE MONITORING DEVICE AT DUST

PROOF BARRICADE TO CONFIRM PRESSURE. DUST MONITORING SHALL

BE BY OWNER. SEE SPECIFICATION 01 00 00 "GENERAL

REQUIREMENTS" ATTACHMENT AND 01 35 26 "SAFETY REQUIREMENTS"

FOR ADDITIONAL REQUIREMENTS.

10. ALL DEMOLITION WORK BEING DONE OUTSIDE TEMPORARY PARTITIONS

IS TO BE APPROPRIATELY SEALED OFF TO PREVENT THE

TRANSMISSION OF DUST AND DEBRIS. WORK SHALL BE DONE TO

MINIMIZE DISRUPTION TO VISITORS, PATIENTS, AND STAFF.

COORDINATE LOCATION OF BARRIERS WITH OWNER.

11. THE HOSPITAL'S SMOKE AND FIRE SUPPRESSION SYSTEM SHALL

REMAIN IN OPERATION WITHIN THE PROJECT AREA DURING THE ENTIRE

CONSTRUCTION PHASE.

12. FIELD VERIFY LOCATION OF ALL EXISTING CONDITIONS. NOTIFY COR

OF ANY DISCREPANCIES.

14. DEBRIS REMOVAL SHALL NOT INTERFERE WITH OWNER'S OPERATIONS

AND SHALL OCCUR DURING OFF HOURS AS DETERMINED BY THE COR.

SEE ALSO SPECIFICATION SECTION 01 35 26 "SAFETY REQUIREMENTS"

FOR ADDITIONAL REQUIREMENTS REGARDING THE HAULING OF DEBRIS

FROM THE PROJECT AREA.

15. ALL NOISE-GENERATING OPERATIONS SHALL BE SCHEDULED SO AS

NOT TO IMPEDE OWNER'S OPERATIONS AS DETERMINED BY THE COR.

ALL WORK IN PUBLIC CORRIDORS SHALL BE PERFORMED "OFF HOURS"

UNLESS OTHERWISE APPROVED BY THE COR.

SYMBOL LEGEND:

EXISTING FLOORING AND WALL BASE IN ENTIRE DASHED,

HATCHED AREA SHALL BE REMOVED AND REPLACED. PREP

SUBFLOOR AND WALLS/MILLWORK AS REQUIRED TO RECEIVE

NEW FLOORING. CONTRACTOR SHALL BE AWARE THAT BASE

REMOVAL SHALL INCLUDE ALL FACES OF EXISTING NURSE

STATIONS, INCLUDING INTERIOR FACES BELOW COUNTERTOPS.

SEE FINISH SCHEDULE FOR REPLACEMENT FLOORING AND BASE

SPECIFICATIONS

SOLID HATCHED AREA INDICATES AREA OUTSIDE OF PROJECT

SCOPE - NO WORK

TEMPORARY PARTITION WALL W/3'-0" X 7'-0" SCWD DOOR FOR

CONTRACTOR ACCESS ONLY. WALL AND DOOR TO BE

REMOVED UPON COMPLETION OF WORK U.N.O. PATCH REPAIR

EXISTING CONDITIONS AS REQUIRED UPON REMOVAL OF ALL

TEMPORARY CONSTRUCTION. REFER TO TYPICAL TEMPORARY

PARTITION DETAIL. SCHEDULE NOTE: CONSTRUCTION OF

TEMPORARY BARRIERS SHALL BE PERFORMED AFTER NORMAL

BUSINESS HOURS UNLESS OTHERWISE APPROVED BY THE COR.

65% CDs SUBMISSION 10.15.20

3/16" = 1'-0"

PHASE 1 IMPROVEMENT PLAN

SUB-BASEMENT A

A-SB

LVT-1

EXIST

NEW

RB-1

FINAL CDs SUBMISSION 11.9.20

DEMOLITION NOTES:

PROTECT EXISTING, SURROUNDING FINISHES. CONTRACTOR SHALL BE

AWARE THAT EXISTING FINISH PRODUCTS ARE DISCONTINUED AND MUST

NOT BE DAMAGED FOR ANY REASON, AS REPLACEMENT PRODUCTS

CANNOT BE PROCURED. GC SHALL BE RESPONSIBLE FOR PROVIDING

TEMPORARY PROTECTION ON ALL EXISTING FINISHES AND SHALL

ENSURE THAT CUTS ADJACENT TO SAME ARE CAREFULLY DONE IN FIELD

TO AVOID DAMAGE. IN THE EVENT THAT FINISHES ARE DAMAGED, THE

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REPAIRS AT NO COST TO

THE VA

REMOVE ENTIRETY OF EXISTING FLOORING AND SUBBASE MATERIALS.

SUBFLOOR SHALL BE FULLY PREPARED TO RECEIVE NEW FINISHES PER

THE MANUFACTURER'S REQUIREMENTS AND PER SPEC SECTION 09 05 16.

WALL BASE SHALL BE CAREFULLY REMOVED TO PREVENT DAMAGE TO

EXISTING DRYWALL AS MUCH AS POSSIBLE. CONTRACTOR SHALL

INCLUDE PREPPING, PATCHING, AND REPAIRING OF THE WALLS PRIOR TO

INSTALLATION OF NEW BASE, AND THE WALLS SHALL BE TOUCHED UP

WITH PAINT MATCHING THE EXISTING WALL COLORS.

PROVIDE FULL PROTECTION OF EXISTING ITEMS IN THE SPACE TO

REMAIN, SUCH AS CABINETS, MILLWORK, EQUIPMENT, ETC. CONTRACTOR

SHALL BE RESPONSIBLE FOR PROVIDING TEMPORARY PROTECTION ON

ALL EXISTING FIELD ITEMS, INCLUDING BUT NOT LIMITED TO TEMPORARY

COVERING OF DIFFUSERS, SMOKE DETECTORS, LIGHT FIXTURES,

OUTLETS, ETC.

EXISTING CARPETING

TO REMAIN

THROUGHOUT

D2 D3

1/4" = 1'-0"

PHASE 1 FINISH PLAN

SUB-BASEMENT A

A-SB

T-1

EXISTING CARPET

TO REMAIN

PT-1: ALL

WALLS

E C

FINISH NOTES: SUB-BASEMENT

1. FLOORING PATTERN: ASHLAR

2. PAINT COLORS INDICATED ON ALL WALLS ARE PROVIDED AS

REFERENCE FOR TOUCH-UP PAINTING WHICH WILL BE REQUIRED

ABOVE NEW WALL BASE. CONTRACTOR SHALL BE RESPONSIBLE FOR

TOUCHING UP ALL PAINT UPON COMPLETION OF NEW WALL BASE

INSTALLATION TO MATCH EXISTING WALLS. SHEEN SHALL BE EG-SHELL

3. REFER TO DEMOLITION NOTES FOR PROTECTION OF EXISTING FINISHES

TO REMAIN

4. FINISH PLAN IS TAKEN THROUGH THE EXISTING KNEE WALLS BELOW

NURSE STATIONS. EXISTING MILLWORK COUNTERTOPS ABOVE ARE

SHOWN DASHED TO SHOW THE FULL EXTENT OF FLOORING AND WALL

BASE WORK

5. NEW WALL BASE SHALL BE PROVIDED AT THE BASE OF ALL EX.

MILLWORK CABINETS SHOWN

6. FINISH PLANS INDICATE FLOORING, BASE, AND PAINT FINISHES ONLY.

REFER TO MILLWORK ELEVATIONS FOR ALL MILLWORK MATERIALS

7. REFER TO SHEET AS-601 FOR FINISH SPECIFICATIONS

CONSTRUCTION NOTES:

ENTIRE PLAM SURFACE OF EXISTING NURSE STATION FACE PANELS TO

BE FULLY SANDED AND MADE ABRASIVE TO RECEIVE ADHESIVE FOR

NEW PLAM INSTALLATION - ENTIRE FACE OF NURSE STATION.

REPAIR/RE-ADHERE ANY LOOSE/PEELING PLASTIC LAMINATE

ENCOUNTERED TO ENSURE THAT NEW LAMINATE CAN BE APPLIED.

VERIFY CONDITIONS IN FIELD

EXISTING VERTICAL AND HORIZONTAL STAINLESS STEEL REVEALS IN

BETWEEN PLAM PANELS TO REMAIN, ALL LOCATIONS @ ENTIRE NURSE

STATION MILLWORK. PROTECT AS REQ'D. FROM DAMAGE THROUGHOUT

CONSTRUCTION

TOP, BOTTOM, AND SIDE EDGES OF PLAM-FACED PANELS SHALL BE

FULLY SANDED. EXPOSED SURFACES SHALL RECEIVE HIGH

PERFORMANCE ADHESIVE PROTECTIVE FASTCAP STRIP - MATCH WIDTH

IN FIELD W/THICKNESS OF PANELS. ALL LOCATIONS @ ENTIRE NURSE

STATION MILLWORK SHALL BE REFACED. REPAIR/RE-ADHERE ANY

LOOSE/PEELING PLASTIC LAMINATE ENCOUNTERED TO ENSURE THAT

NEW CAP STRIP CAN BE APPLIED. VERIFY CONDITIONS IN FIELD

ALL OUTSIDE CORNER GUARDS SHALL BE REMOVED AND REPLACED

WITH NEW 1.5"X1.5" STAINLESS CORNER GUARD. LAMINATE SURFACE

UNDERNEATH TO RECEIVE SILICONE ADHESIVE PRIOR TO CORNER

GUARD INSTALL.

NEW STAINLESS STEEL BASE. ALL OUTSIDE CORNER CONDITIONS OF

BASE SHALL MITERED, PREFABRICATED PIECES FOR ADDED

PROTECTION. REFER TO PLAN DETAILS FOR SPECIAL CONDITIONS.

STAINLESS METALLIC SILICONE TO BE USED AT SEAMS. SEAMS @

OUTSIDE CORNERS WILL NOT BE ACCEPTED

EXISTING BASE @ ENTIRE FACE OF NURSE STATION MILLWORK TO

BE REMOVED & REPLACED WITH NEW

ALL WALLS THAT FACE CONST. AREAS (WITH THE EXCEPTION OF THE

PUBLIC FACES OF THE NURSE STATION DESKS) TO RECEIVE NEW

RUBBER BASE. SEE FINISH SCHEDULE

UNINSTALL, REALIGN, AND LEVEL ALL EXISTING COUNTERTOPS. INSTALL

NEW SILICONE @ EXISTING SEAM LOCATIONS, (

") TO MATCH EXISTING

COUNTER

NOT USED

EXISTING BRACKET SYSTEM SUPPORT TO BE REMOVED AND REPLACED

WITH NEW STEEL BRACKET AT FORMER BRACKET LOCATION

NOT USED

X'ED TILE INDICATES FULL TILE WORKPOINT LOCATION

FOR FLOORING AREA, ALIGNED W/WALLS AS SHOWN

EXISTING VINYL FLOORING 4" WIDE PROFILE TRANSITION STRIP SHALL BE

REMOVED AND REPLACED WITH NEW. SEE FINISH PLAN FOR SPECS.

DASHED BOX INDICATES EXISTING FLUSH FLOOR OUTLET BOX TO

REMAIN. GC SHALL REMOVE EX. FLOORING IN TOP OF BOX AND REPLACE

SAME WITH NEW FLOORING

PROVIDE VINYL TRANSITION STRIP FROM NEW FLOORING TO EXISTING

FLOORING @ DOORWAY. SEE FINISH PLAN FOR SPECS.

REMOVE EXISTING VINYL TRANSITION STRIP. NEW VINYL FLOORING

SHALL CLEANLY AND FLUSHLY TRANSITION TO EXISTING AT OUTER FACE

OF FORMER STRIP. SEE FINISH PLAN FOR SPECS.

EXISTING COUNTERTOP TO BE DEMOLISHED AND REPLACED WITH NEW.

NEW SHAPE SHALL MATCH EXISTING SHAPE - VERIFY DIMS. IN FIELD

PRIOR TO DEMOLITION

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AF-C03A

AutoCAD SHX Text

NURSE

AutoCAD SHX Text

STATION

AutoCAD SHX Text B

AutoCAD SHX Text

FEC

AutoCAD SHX Text

AF-C06C

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text B

AutoCAD SHX Text

AF-210

AutoCAD SHX Text

REPORT

AutoCAD SHX Text

ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

AF-C03B

AutoCAD SHX Text

RECEPTION

AutoCAD SHX Text B

AutoCAD SHX Text

AF-209

AutoCAD SHX Text

MEDS ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

AF-C03C

AutoCAD SHX Text

SHARED

AutoCAD SHX Text

WORKSTATIONS

AutoCAD SHX Text B

AutoCAD SHX Text

AF-C03C

AutoCAD SHX Text

REGISTRATION

AutoCAD SHX Text B

AutoCAD SHX Text

AF-212

AutoCAD SHX Text

CONFERENCE ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

AF-210

AutoCAD SHX Text

REPORT

AutoCAD SHX Text

ROOM

BF175

BF174

BF173

BF172

BF171

BF170

BF165

BF217

BF210

BF206

BF207

BF208

BF209

BF201

BF202

BF176

BF203

BF205

BF204

BF212

BF213

BF211

BF215

BF214

BF216

BF164

BF218

BF190

BF191

BF192

BF101

BF193

BF102

BF103

BF104

BF105

BF106

BF107

BF108

BF111

BF110

BF109

BF121

BF122

BF123

BF124

BF125

BF126

BF127BF134BF133

BF132

BF130 BF129

BF128

BF131

BF163

BF162

BF161

BF160

BF159

BF158

BF157

BF156

BF155

BF154

BF153

BF152

BF151

BF150

BF451

BF348 BF347

BF347A

BF346

BF346A

BF345

BF470

BF350

BF452

BFS1

BFS2

BFS3

BFC09

STAIR S2

STAIR S3

STAIR S1

BFC02A

BF176A BF176B

BF176C

BFC01B

BFELC1

BFC08A

BF165A

BFC02B

BFC02C

BFC07E

BF215A

BFLVC2

BFLVC1

BFC02E

BFC05B

BFELC2

BFC07CBFC07B

BFC07A

BFC07D

BF134A

BFC06B

BFC01C

BFC01A

BFC01

BFC09

BFC03

BFC08

BFC05

BFC07

BFC06G

BFC06E

BFC06D

BFC06F

BFC06

BFC06C

BFC04

BFC05C

BFC02D

BFC02F

BFC01D

BFC02

BFC06A

P1 P2 P3

BFC08B

BG301

AC-28

BS24

STAIR 24

BE252A

OIT Telecom/ Data Closet

A-100A

2,3,4

A-100B

5,6

A-100B

PHASES 2-4: BASEMENT LEVEL B -

DEMOLITION/IMPROVEMENT PLANS

DESIGN DEVELOPMENT SUBMISSION

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

F i l e

P a t h

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 6 7 8 9 10

REPLACE CARES TOWER

FLOORING & NURSE STATIONS

10701 EAST BLVD. CLEVELAND, OHIO

541-21-202

NICK CARROZZA

CJK KKERevisions: Date:

E T

RET

HCRA

KACZMAR

STANLEY

NO. 4988

E R

ATE

T C

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

A-100A

FINAL CDs SUBMISSION

11.9.20

1/16" = 1'-0"

OVERALL PLAN

CARES TOWER: BASEMENT B

A-100A

3/16" = 1'-0"

PHASE 2 IMPROVEMENT PLAN

BASEMENT B

A-100A

8.10.20

65% CDs SUBMISSION 10.15.20

GENERAL NOTES:

1. CONSIDER ALL AREAS OWNER-OCCUPIED, UNLESS OTHERWISE NOTED.

2. ALL WALLS ARE DRAWN AND DIMENSIONED TO A 5" NOMINAL WIDTH

TYPICAL UNLESS OTHERWISE NOTED. ALL DIMENSIONS ARE CLEAR

DIMENSIONS FROM FACE OF GYPSUM BOARD TO FACE OF GYPSUM

BOARD

3. ALL SUB-CONTRACTORS TO DESIGN AND INSTALL SYSTEM PER OWNER

REQUIREMENTS AND IN STRICT ACCORDANCE WITH THE

REQUIREMENTS OF ALL APPLICABLE CODES.

4. PATCH AND REPAIR ALL EXISTING AREAS TO REMAIN AS REQUIRED TO

MATCH EXISTING CONDITIONS.

5. ALL DAMAGE TO EXISTING AREAS OCCURING AS A RESULT OF

CONSTRUCTION SHALL BE REPAIRED. CONTRACTOR SHALL PROTECT

ALL EXISTING WALL, CEILING, AND FLOOR FINISHES IN EACH AREA. ANY

SURFACES DAMAGED BY CONTRACTOR SHALL BE REPLACED BY THE

CONTRACTOR AT NO ADDITIONAL COST TO OWNER.

6. ALL NEW PENETRATIONS IN FIRE RATED ASSEMBLIES TO MAINTAIN FIRE

RATING OF ASSEMBLY AS REQUIRED.

13. ALL FLOOR, WALL, CEILING, AND MISC. FIRE RESISTIVE ASSEMBLIES

AND CONSTRUCTION SHALL BE OF THE FIRE RATING CALLED FOR ON

THE DRAWINGS AND / OR AS REQUIRED BY CODE. ALL EXISTING FIRE

RESISTIVE ASSEMBLIES SHALL BE MAINTAINED AND THE RATING NOT

COMPROMISED. FIRE RATED ASSEMBLIES AND CONSTRUCTION

INCLUDING ALL FIRE STOPPING, FIRE RATED DOORS AND MISC. FIRE

RESISTIVE REQUIREMENTS SHALL BE LEFT UNCONCEALED AS

REQUIRED FOR INSPECTION BY THE BUILDING OFFICIAL.

7. FURNITURE SHOWN FOR REFERENCE ONLY. THE VA SHALL BE

RESPONSIBLE FOR REMOVING, PRIOR TO CONSTRUCTION, ALL ITEMS

THAT THE VA DESIRES TO SALVAGE. ALL ITEMS TO REMAIN IN SPACE

SHALL BE PROTECTED BY THE CONTRACTOR THROUGHOUT

CONSTRUCTION.

8. CONTRACTOR SHALL PROVIDE DUST REMOVING WALK-OFF MATS

(TACKY MAT) AT ALL CONSTRUCTION ENTRY POINTS

9. CONTRACTOR SHALL PROVIDE HEPA FILTERED NEGATIVE AIR

MACHINE(S) TO MAINTAIN NEGATIVE PRESSURE IN WORK AREA

ENSURING NO DUST OR FUMES WILL BE TRANSFERRED TO OCCUPIED

AREAS. PROVIDE VISUAL PRESSURE MONITORING DEVICE AT DUST

PROOF BARRICADE TO CONFIRM PRESSURE. DUST MONITORING SHALL

BE BY OWNER. SEE SPECIFICATION 01 00 00 "GENERAL

REQUIREMENTS" ATTACHMENT AND 01 35 26 "SAFETY REQUIREMENTS"

FOR ADDITIONAL REQUIREMENTS.

10. ALL DEMOLITION WORK BEING DONE OUTSIDE TEMPORARY PARTITIONS

IS TO BE APPROPRIATELY SEALED OFF TO PREVENT THE

TRANSMISSION OF DUST AND DEBRIS. WORK SHALL BE DONE TO

MINIMIZE DISRUPTION TO VISITORS, PATIENTS, AND STAFF.

COORDINATE LOCATION OF BARRIERS WITH OWNER.

11. THE HOSPITAL'S SMOKE AND FIRE SUPPRESSION SYSTEM SHALL

REMAIN IN OPERATION WITHIN THE PROJECT AREA DURING THE ENTIRE

CONSTRUCTION PHASE.

12. FIELD VERIFY LOCATION OF ALL EXISTING CONDITIONS. NOTIFY COR

OF ANY DISCREPANCIES.

14. DEBRIS REMOVAL SHALL NOT INTERFERE WITH OWNER'S OPERATIONS

AND SHALL OCCUR DURING OFF HOURS AS DETERMINED BY THE COR.

SEE ALSO SPECIFICATION SECTION 01 35 26 "SAFETY REQUIREMENTS"

FOR ADDITIONAL REQUIREMENTS REGARDING THE HAULING OF DEBRIS

FROM THE PROJECT AREA.

15. ALL NOISE-GENERATING OPERATIONS SHALL BE SCHEDULED SO AS

NOT TO IMPEDE OWNER'S OPERATIONS AS DETERMINED BY THE COR.

ALL WORK IN PUBLIC CORRIDORS SHALL BE PERFORMED "OFF HOURS"

UNLESS OTHERWISE APPROVED BY THE COR.

SYMBOL LEGEND:

EXISTING FLOORING AND WALL BASE IN ENTIRE DASHED,

HATCHED AREA SHALL BE REMOVED AND REPLACED. PREP

SUBFLOOR AND WALLS/MILLWORK AS REQUIRED TO RECEIVE

NEW FLOORING. CONTRACTOR SHALL BE AWARE THAT BASE

REMOVAL SHALL INCLUDE ALL FACES OF EXISTING NURSE

STATIONS, INCLUDING INTERIOR FACES BELOW COUNTERTOPS.

SEE FINISH SCHEDULE FOR REPLACEMENT FLOORING AND BASE

SPECIFICATIONS

SOLID HATCHED AREA INDICATES AREA OUTSIDE OF PROJECT

SCOPE - NO WORK

TEMPORARY PARTITION WALL W/3'-0" X 7'-0" SCWD DOOR FOR

CONTRACTOR ACCESS ONLY. WALL AND DOOR TO BE

REMOVED UPON COMPLETION OF WORK U.N.O. PATCH REPAIR

EXISTING CONDITIONS AS REQUIRED UPON REMOVAL OF ALL

TEMPORARY CONSTRUCTION. REFER TO TYPICAL TEMPORARY

PARTITION DETAIL. SCHEDULE NOTE: CONSTRUCTION OF

TEMPORARY BARRIERS SHALL BE PERFORMED AFTER NORMAL

BUSINESS HOURS UNLESS OTHERWISE APPROVED BY THE COR.

CONTRACTOR SHALL

SEAL EX. ENTRY DOOR

AS REQ'D. THROUGHOUT

CONSTRUCTION TO

PREVENT DUST/DEBRIS

FROM EXITING ROOM.

PROTECT EX. DOOR AS

REQ'D.

PROVIDE FLOORING UP

TO BOTH SIDES OF

RECESSED OPER.

PARTITION TRACK.

ENSURE THAT

OPERATION OF

PARTITION IS

MAINTAINED AND DOES

NOT CONFLICT WITH NEW

FLOORING

NOTE: FLOOR BASE

DOES NOT OCCUR

ON ALL EX.

STOREFRONT

WALLS

NOTE: FLOOR BASE

DOES NOT OCCUR ON

ALL EX. STOREFRONT

WALLS

3/16" = 1'-0"

PHASE 3 IMPROVEMENT PLAN

BASEMENT B

A-100A

ALIGN FLOORING

ALIGN

3/16" = 1'-0"

PHASE 4 IMPROVEMENT PLAN

BASEMENT B

A-100A

ALIGN FLOORING

W/PHASE 3

SPECIAL NOTE: EX. MED.

GAS ALARM PANEL FALLS

WITHIN CONST. AREA.

GC SHALL ALLOW STAFF

ENTRY INTO SPACE IN

THE EVENT OF ALARM.

COORD. W/STAFF

SPECIAL NOTE:

ACCESS INTO MED.

ROOM MAY BE

REQ'D. BY STAFF.

GC SHALL COORD.

W/STAFF AS REQ'D.

ALIGN

NOTE: FLOOR BASE

DOES NOT OCCUR

ON ALL EX.

STOREFRONT WALLS

SPECIAL NOTE: SMALL

PORTION OF NEW

FLOORING INSTALLATION

OCCURS OUTSIDE OF

TEMP. PARTITIONS TO

PERMIT STAFF USE OF

DESK. GC SHALL COORD.

TIME FOR NEW FLOORING

INSTALLATION W/VA IN

THIS AREA

FINAL CDs SUBMISSION 11.9.20

FLOORING/BASE

REPLACEMENT SCOPE

SHALL OCCUR UNDER

DOOR STACK PANELS

DEMOLITION NOTES:

PROTECT EXISTING, SURROUNDING FINISHES. CONTRACTOR SHALL BE

AWARE THAT EXISTING FINISH PRODUCTS ARE DISCONTINUED AND MUST

NOT BE DAMAGED FOR ANY REASON, AS REPLACEMENT PRODUCTS

CANNOT BE PROCURED. GC SHALL BE RESPONSIBLE FOR PROVIDING

TEMPORARY PROTECTION ON ALL EXISTING FINISHES AND SHALL

ENSURE THAT CUTS ADJACENT TO SAME ARE CAREFULLY DONE IN FIELD

TO AVOID DAMAGE. IN THE EVENT THAT FINISHES ARE DAMAGED, THE

CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REPAIRS AT NO COST TO

THE VA

REMOVE ENTIRETY OF EXISTING FLOORING AND SUBBASE MATERIALS.

SUBFLOOR SHALL BE FULLY PREPARED TO RECEIVE NEW FINISHES PER

THE MANUFACTURER'S REQUIREMENTS AND PER SPEC SECTION 09 05 16.

WALL BASE SHALL BE CAREFULLY REMOVED TO PREVENT DAMAGE TO

EXISTING DRYWALL AS MUCH AS POSSIBLE. CONTRACTOR SHALL

INCLUDE PREPPING, PATCHING, AND REPAIRING OF THE WALLS PRIOR TO

INSTALLATION OF NEW BASE, AND THE WALLS SHALL BE TOUCHED UP

WITH PAINT MATCHING THE EXISTING WALL COLORS.

PROVIDE FULL PROTECTION OF EXISTING ITEMS IN THE SPACE TO

REMAIN, SUCH AS CABINETS, MILLWORK, EQUIPMENT, ETC. CONTRACTOR

SHALL BE RESPONSIBLE FOR PROVIDING TEMPORARY PROTECTION ON

ALL EXISTING FIELD ITEMS, INCLUDING BUT NOT LIMITED TO TEMPORARY

COVERING OF DIFFUSERS, SMOKE DETECTORS, LIGHT FIXTURES,

OUTLETS, ETC.

D3 D4

EXISTING VINYL

PLANK

FLOORING TO

REMAIN AND BE

PROTECTED

EXISTING VINYL

TILE FLOORING

TO REMAIN

AND BE

PROTECTED

EXISTING VINYL

TILE FLOORING

TO REMAIN

AND BE

PROTECTED

EXISTING VINYL

PLANK

FLOORING TO

REMAIN AND BE

PROTECTED

D3 D4

W D3 D4

DEDUCT ALTERNATE #1:

· PHASE 2 TO BE ELIMINATED FROM PROJECT IN ITS ENTIRETY. EXISTING

FINISHES TO REMAIN

· SCOPE OF WORK IN FAMILY WAITING ROOM BF-C07A TO BE ELIMINATED IN

ITS ENTIRETY. EXISTING FINISHES TO REMAIN

DEDUCT ALTERNATE #1:

SCOPE OF WORK IN FAMILY

WAITING ROOM BF-C07A TO

BE ELIMINATED IN ITS

ENTIRETY. EXISTING

FINISHES TO REMAIN

2 7

DEDUCT ALT. #1:

CONSTRUCTION NOTES:

ENTIRE PLAM SURFACE OF EXISTING NURSE STATION FACE PANELS TO

BE FULLY SANDED AND MADE ABRASIVE TO RECEIVE ADHESIVE FOR

NEW PLAM INSTALLATION - ENTIRE FACE OF NURSE STATION.

REPAIR/RE-ADHERE ANY LOOSE/PEELING PLASTIC LAMINATE

ENCOUNTERED TO ENSURE THAT NEW LAMINATE CAN BE APPLIED.

VERIFY CONDITIONS IN FIELD

EXISTING VERTICAL AND HORIZONTAL STAINLESS STEEL REVEALS IN

BETWEEN PLAM PANELS TO REMAIN, ALL LOCATIONS @ ENTIRE NURSE

STATION MILLWORK. PROTECT AS REQ'D. FROM DAMAGE THROUGHOUT

CONSTRUCTION

TOP, BOTTOM, AND SIDE EDGES OF PLAM-FACED PANELS SHALL BE

FULLY SANDED. EXPOSED SURFACES SHALL RECEIVE HIGH

PERFORMANCE ADHESIVE PROTECTIVE FASTCAP STRIP - MATCH WIDTH

IN FIELD W/THICKNESS OF PANELS. ALL LOCATIONS @ ENTIRE NURSE

STATION MILLWORK SHALL BE REFACED. REPAIR/RE-ADHERE ANY

LOOSE/PEELING PLASTIC LAMINATE ENCOUNTERED TO ENSURE THAT

NEW CAP STRIP CAN BE APPLIED. VERIFY CONDITIONS IN FIELD

ALL OUTSIDE CORNER GUARDS SHALL BE REMOVED AND REPLACED

WITH NEW 1.5"X1.5" STAINLESS CORNER GUARD. LAMINATE SURFACE

UNDERNEATH TO RECEIVE SILICONE ADHESIVE PRIOR TO CORNER

GUARD INSTALL.

NEW STAINLESS STEEL BASE. ALL OUTSIDE CORNER CONDITIONS OF

BASE SHALL MITERED, PREFABRICATED PIECES FOR ADDED

PROTECTION. REFER TO PLAN DETAILS FOR SPECIAL CONDITIONS.

STAINLESS METALLIC SILICONE TO BE USED AT SEAMS. SEAMS @

OUTSIDE CORNERS WILL NOT BE ACCEPTED

EXISTING BASE @ ENTIRE FACE OF NURSE STATION MILLWORK TO

BE REMOVED & REPLACED WITH NEW

ALL WALLS THAT FACE CONST. AREAS (WITH THE EXCEPTION OF THE

PUBLIC FACES OF THE NURSE STATION DESKS) TO RECEIVE NEW

RUBBER BASE. SEE FINISH SCHEDULE

UNINSTALL, REALIGN, AND LEVEL ALL EXISTING COUNTERTOPS. INSTALL

NEW SILICONE @ EXISTING SEAM LOCATIONS, (

") TO MATCH EXISTING

COUNTER

NOT USED

EXISTING BRACKET SYSTEM SUPPORT TO BE REMOVED AND REPLACED

WITH NEW STEEL BRACKET AT FORMER BRACKET LOCATION

NOT USED

X'ED TILE INDICATES FULL TILE WORKPOINT LOCATION

FOR FLOORING AREA, ALIGNED W/WALLS AS SHOWN

EXISTING VINYL FLOORING 4" WIDE PROFILE TRANSITION STRIP SHALL BE

REMOVED AND REPLACED WITH NEW. SEE FINISH PLAN FOR SPECS.

DASHED BOX INDICATES EXISTING FLUSH FLOOR OUTLET BOX TO

REMAIN. GC SHALL REMOVE EX. FLOORING IN TOP OF BOX AND REPLACE

SAME WITH NEW FLOORING

PROVIDE VINYL TRANSITION STRIP FROM NEW FLOORING TO EXISTING

FLOORING @ DOORWAY. SEE FINISH PLAN FOR SPECS.

REMOVE EXISTING VINYL TRANSITION STRIP. NEW VINYL FLOORING

SHALL CLEANLY AND FLUSHLY TRANSITION TO EXISTING AT OUTER FACE

OF FORMER STRIP. SEE FINISH PLAN FOR SPECS.

EXISTING COUNTERTOP TO BE DEMOLISHED AND REPLACED WITH NEW.

NEW SHAPE SHALL MATCH EXISTING SHAPE - VERIFY DIMS. IN FIELD

PRIOR TO DEMOLITION

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FEC

ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg ftp://adeskftp.autodesk.com/pointa/generalsymbolscatalog/COPY_MACHINE.dwg AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text O

AutoCAD SHX Text V

AutoCAD SHX Text A

AutoCAD SHX Text 5'-4"

AutoCAD SHX Text A-100

AutoCAD SHX Text E

AutoCAD SHX Text

BF-216

AutoCAD SHX Text

PATIENT

AutoCAD SHX Text

LOUNGE

AutoCAD SHX Text B

AutoCAD SHX Text

BF-217

AutoCAD SHX Text

CONFERENCE

AutoCAD SHX Text

ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

BF-218

AutoCAD SHX Text

MED.

AutoCAD SHX Text

ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07B

AutoCAD SHX Text

NURSE STATION/

AutoCAD SHX Text

WARD CLERK

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07C

AutoCAD SHX Text

CRASH

AutoCAD SHX Text

CART

AutoCAD SHX Text B

AutoCAD SHX Text

BF-134

AutoCAD SHX Text

EMPLOYEE

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

LOUNGE

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07A

AutoCAD SHX Text

FAMILY

AutoCAD SHX Text

WAITING

AutoCAD SHX Text B

AutoCAD SHX Text

BF-133

AutoCAD SHX Text

TOILET

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07A

AutoCAD SHX Text

WORK

AutoCAD SHX Text

AREA

AutoCAD SHX Text B

AutoCAD SHX Text

BF-218

AutoCAD SHX Text

MED.

AutoCAD SHX Text

ROOM

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07B

AutoCAD SHX Text

NURSE STATION/

AutoCAD SHX Text

WARD CLERK

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07C

AutoCAD SHX Text

CRASH

AutoCAD SHX Text

CART

AutoCAD SHX Text B

AutoCAD SHX Text

BF-134

AutoCAD SHX Text

EMPLOYEE

AutoCAD SHX Text

LOCKER

AutoCAD SHX Text

LOUNGE

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07A

AutoCAD SHX Text

FAMILY

AutoCAD SHX Text

WAITING

AutoCAD SHX Text B

AutoCAD SHX Text

BF-133

AutoCAD SHX Text

TOILET

AutoCAD SHX Text B

AutoCAD SHX Text

BF-C07A

AutoCAD SHX Text

WORK

AutoCAD SHX Text

AREA

A-600

A-601

PHASES 2-4: BASEMENT LEVEL B -

FINISH PLAN, MILLWORK ELEVATIONS

& PHOTOGRAPHS

DESIGN DEVELOPMENT SUBMISSION

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

F i l e

P a t h

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD STAMPCONSULTANTS

321 4 6 7 8 9 10

REPLACE CARES TOWER

FLOORING & NURSE STATIONS

10701 EAST BLVD. CLEVELAND, OHIO

541-21-202

NICK CARROZZA

CJK KKERevisions: Date:

E T

RET

HCRA

KACZMAR

STANLEY

NO. 4988

E R

ATE

T C

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

A-100B

FINAL CDs SUBMISSION

11.9.20 8.10.20

3/8" = 1'-0"

INTERIOR ELEVATION

NURSE STATION BF-CO7B

A-100B

3/8" = 1'-0"

INTERIOR ELEVATION

NURSE STATION BF-CO7B

A-100B

3/8" = 1'-0"

INTERIOR ELEVATION

NURSE STATION BF-CO7B

A-100B

65% CDs SUBMISSION 10.15.20

GENERAL NOTES:

1. CONSIDER ALL AREAS OWNER-OCCUPIED, UNLESS OTHERWISE NOTED.

2. ALL WALLS ARE DRAWN AND DIMENSIONED TO A 5" NOMINAL WIDTH

TYPICAL UNLESS OTHERWISE NOTED. ALL DIMENSIONS ARE CLEAR

DIMENSIONS FROM FACE OF GYPSUM BOARD TO FACE OF GYPSUM

BOARD

3. ALL SUB-CONTRACTORS TO DESIGN AND INSTALL SYSTEM PER OWNER

REQUIREMENTS AND IN STRICT ACCORDANCE WITH THE

REQUIREMENTS OF ALL APPLICABLE CODES.

4. PATCH AND REPAIR ALL EXISTING AREAS TO REMAIN AS REQUIRED TO

MATCH EXISTING CONDITIONS.

5. ALL DAMAGE TO EXISTING AREAS OCCURING AS A RESULT OF

CONSTRUCTION SHALL BE REPAIRED. CONTRACTOR SHALL PROTECT

ALL EXISTING WALL, CEILING, AND FLOOR FINISHES IN EACH AREA. ANY

SURFACES DAMAGED BY CONTRACTOR SHALL BE REPLACED BY THE

CONTRACTOR AT NO ADDITIONAL COST TO OWNER.

6. ALL NEW PENETRATIONS IN FIRE RATED ASSEMBLIES TO MAINTAIN FIRE

RATING OF ASSEMBLY AS REQUIRED.

13. ALL FLOOR, WALL, CEILING, AND MISC. FIRE RESISTIVE ASSEMBLIES

AND CONSTRUCTION SHALL BE OF THE FIRE RATING CALLED FOR ON

THE DRAWINGS AND / OR AS REQUIRED BY CODE. ALL EXISTING FIRE

RESISTIVE ASSEMBLIES SHALL BE MAINTAINED AND THE RATING NOT

COMPROMISED. FIRE RATED ASSEMBLIES AND CONSTRUCTION

INCLUDING ALL FIRE STOPPING, FIRE RATED DOORS AND MISC. FIRE

RESISTIVE REQUIREMENTS SHALL BE LEFT UNCONCEALED AS

REQUIRED FOR INSPECTION BY THE BUILDING OFFICIAL.

7. FURNITURE SHOWN FOR REFERENCE ONLY. THE VA SHALL BE

RESPONSIBLE FOR REMOVING, PRIOR TO CONSTRUCTION, ALL ITEMS

THAT THE VA DESIRES TO SALVAGE. ALL ITEMS TO REMAIN IN SPACE

SHALL BE PROTECTED BY THE CONTRACTOR THROUGHOUT

CONSTRUCTION.

8. CONTRACTOR SHALL PROVIDE DUST REMOVING WALK-OFF MATS

(TACKY MAT) AT ALL CONSTRUCTION ENTRY POINTS

9. CONTRACTOR SHALL PROVIDE HEPA FILTERED NEGATIVE…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 27, 2021.