PWS_Redacted.pdf
PDF 418 KB Posted
- Attached to
- W911SD-22-R-0078- 3 ROLLED FLAT IRONER-AMENDMENT
- Solicitation number
- W911SD-22-R-0078
About this file
This document outlines a requirement for a three roll flatwork ironer from the Department of the Army. The Army Sustainment Command requires a new steam heated, three roll flatwork ironer with a minimum 150-inch finishing width and 208VAC 3-phase electrical service to replace aging equipment at the West Point Laundry Facility. Vendors must perform an on-site evaluation of the current equipment and space, then remove the existing ironer, install the new ironer, and connect all utilities. Installation is to be completed by August 30, 2022. The solicitation will be available on March 29, 2022 on SAM.gov under number W911SD-22-R-0078 and is open only to small businesses. Offerors must attend a mandatory site visit to be considered for award of this contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911SD-22-R-0078-0001 3 ROLL FLAT IRON.pdf | ||
| W911SD-22-R-0078- 3 ROLL FLAT IRON.pdf | ||
| SPECS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNCLASSIFIED
DEPARTMENT OF THE ARMY
US ARMY SUSTAINMENT COMMAND
Bldg. 845 Laundry and
Dry Cleaning Plant, West Point, NY 10996
MEMO TO: Contract Specialist, MICC
SUBJECT: Laundry Steam Three Roll Flatwork Ironer
Requirement: The Laundry Facility requires a new steam heated, three roll flatwork ironer to accomplish the mission of laundering clothing and linens for the cadets and medical treatment facilities. The equipment will replace the current item which is beyond life cycle expectancy and could cause a delay in the processing of laundry. The ironer has a life cycle expectancy of 15 years but is 34 years old. This item is utilized daily to accomplish the mission. To maintain this operational tempo with properly maintained equipment, operation must be seamless and result in minimal operational deficiencies. The intent is to purchase the equipment as soon as practical utilizing the following specifications.
Three Roll Steam Heated Ironer:
1. Same or equivalent to Jensen 336-CF-153.
2. Insulated canopy and steam lines for radiant heat reduction.
3. Finger guards and safeties around the machine.
4. Forward reversing and jog capabilities
5. Adjustable chest pressure and drive speed.
6. Ability to interface with other feed and folding machines
7. Vacuum and exhaust equipped.
8. 208VAC 3 phase electrical service compatible.
9. Steam supply requirement of 125 PSI.
10. Minimum 150" finishing width capacity.
11. CSA compliant.
Vendor Requirements:
Must perform a site visit to examine current equipment and ensure new equipment will be compatible with all electric, plumbing, and steam, and can fit in installation space provided.
Must remove and dispose of current, unserviceable three roll ironer, including disconnect of all components tied into facility utilities, and install new equipment.
The vendor will be responsible for shipping, delivering, uncrating, installation, start-up, electrical, and demonstration of new equipment and removal of packaging and installation materials. Installation to include connection of new equipment to all existing electric, plumbing, and steam.
Must include a standard 1-year warranty on parts and workmanship.
File details come from the government source that posted it. Updated .