Provisions and Clauses Full-Text Attachment.docx

LOCAL CLAUSE LIST OF SPECIAL INSTRUCTIONS

ACC - APG POINT OF CONTACT

The ACC - APG point of contact for this action is:

Contracting Officer: Caleb Baisden Telephone Number: 520-672-9577 E-mail: richard.c.baisden2.civ@army.mil

Contracting Specialist: Stency Steephan Telephone number: +1 520-672-9594 E-mail: Stency.f.steephan.civ@army.mil

(End of clause)

TECHNICAL POINT OF CONTACT

TECHNICAL POINT OF CONTACT

TPOC Name: TBD Telephone Number: TBD Email: TBD

(End of clause)

SOLICIT ONLY ONE SOURCE

INTENT TO SOLICIT ONLY ONE SOURCE

The proposed contract action is for supplies or services for which the Government is soliciting and negotiating with only one source under the authority of FAR 13.106-1(b)(1)(i). The name of the company the Government intends to award a contract to is The MathWorks, Inc. located at 3 Apple Hill Drive, Natick, MA, 01760 (CAGE: 0C524). This notice of intent is not a request for competitive proposals. However, the Government will consider all proposals received prior to the closing date and time of this solicitation.

(End of Provision)

TYPE OF CONTRACT

TYPE OF CONTRACT (Reference: 52.216-1)

This is a Firm Fixed Price (FFP) type of contract.

(End of clause)

NON-PERSONAL SERVICES

ARL/ALC/GARRISON NON-PERSONAL SERVICES (JUL 2012)

The contractor, as an independent contractor and not as an agent of the Government, shall provide the necessary resources (except those furnished by the Government) to accomplish tasks of the type set forth in the Performance Work Statement.

Contractor employees performing services under this contract shall be controlled, directed and supervised at all times by management personnel of the contractor. The contractor's management shall ensure that employees properly comply with the performance standards outlined in this Performance Work Statement and as required by the contracting officer or the contracting officer's representative (COR). Contractor employees shall perform independent of and without the supervision of any Government official. Actions of contractor employees may not be interpreted or implemented in any manner that results in any contractor employee creating or modifying Federal policy, obligating the appropriated funds of the U.S. Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee or otherwise violating the prohibitions set forth in Parts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR). The Government shall control access to the facility and shall perform the inspection and acceptance of completed work and tasks.

(End of clause)

DISTRIBUTION STATEMENT A

DISTRIBUTION STATEMENT A

Approved for public release; distribution is unlimited.

(End of clause)

GOV INSPECTION AND ACCEPTANCE

GOVERNMENT INSPECTION AND ACCEPTANCE

Government Inspection and Acceptance shall be performed at Aberdeen Proving Grounds (APG) by an authorized Government Representative.

(End of clause)

PAYMENT OFFICE (BANKCARD)

PAYMENT OFFICE (BANKCARD - INVOICES REQUIRED)

Invoice:

The Contractor shall submit their invoice, via email, to the following address:

usarmy.apg.acc.mbx.adelphi-invoices@army.mil

The Contractor shall include the contract number and invoice number in the subject line of the email.

The invoice must include all of the following:

1. Name, address, and phone number of the Contractor / Vendor.

4. Include the Contract Line Item number with the associated description, quantity, unit price, and extended price of supplies delivered or services performed.

9. Any other pertinent information or documentation required by the contract (such as evidence of shipment.)

The bankcard invoice processing office will not process partial payments on contracts for supply items where the delivery date is constant. All partial payment schedules must be obtained through the contacting officer with the appropriate clauses included in the contract.

The invoice will be forwarded by the Bankcard Invoice Processing Office personnel to the procuring activity’s Technical Representative for approval, and then will be paid by bankcard.

Receiving Report:

The Technical Point of Contact (TPOC)/Contracting Officer’s Representative (COR) listed in this contract shall submit a receiving report, via email, to the following address once all supplies/services have been delivered/performed:

usarmy.apg.acc.mbx.adelphi-invoices@army.mil

The receiving report must include all of the following:

(End of clause)

TAX EXEMPTION CERTIFICATE (ARL)

Exemption certificate number 30005004 covers exemption from Maryland retail sales and use tax.

The Federal Tax Identification number for the Army Research Laboratory is: 53-0215803.

(End of Clause)

EXERCISE OF OPTION

EXERCISE OF OPTION

The Contracting Officer may exercise the option(s) contained at CLIN 0002 by written modification to the contract at any point during the period of performance of an active CLIN.

(End of clause)

SUBSCRIPTION AND SOFTWARE PLATFORM RENEWALS

SUBSCRIPTION AND SOFTWARE PLATFORM RENEWALS

The Contractor shall not, under any circumstance, continue to provide any subscription or software platform services past the period of performance of this contract unless or until an option is exercised or a new contract award is made by a warranted Government Contracting Officer. Only Contracting Officers have authority to enter into, administer, or terminate contracts. No other Government employees have the authority to authorize continuation of services.

The Contractor must end the services immediately at the completion of the performance period. The Government will not accept continued subscription and software platform services after the award’s completion date. No additional costs will be added to the contract to compensate for the timeframes between the end date of this contract and the start date of a new contract if the service is renewed.

(End of clause)

PAYMENT INSTRUCTIONS

PAYMENT INSTRUCTIONS

The payment office shall allocate and record the amounts paid to the accounting classification citations in the contract using the table at DFARS PGI 204.7108(b)(2) [link below] based on the type of payment request submitted and the type of effort.

https://www.acq.osd.mil/dpap/dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions

(End of clause)

SUPERVISION OF EMPLOYEES

The Contractor's employees shall remain under the Contractor's direct supervision at all times. Although the Government will issue tasks and coordinate directions within the scope of the contract, detailed instructions for Contractor employees and supervision of individual workers shall remain the responsibility of the Contractor.

(End of clause)

WORK HOURS

Normal work hours are from 7:45 A.M. through 4:15 P.M, Monday through Friday. Contractors will not be permitted to work on Saturdays, Sundays or legal holidays (or hours/days on which the installation is officially opening late, closing early, or is closed entirely, for any reason, unless otherwise authorized by the Contracting Officer. Furthermore, if the Contractor chooses to pay its' employees for these days, such costs shall not be charged as a direct expense to this contract. However, Saturdays, Sundays and legal holidays are included in computation of performance of this contract. The Government reserves the right to require the contractor employees to set a daily schedule with consistent start and end times.

The following legal holidays will be observed:

January 1st 3rd Monday of January 3rd Monday of February Last Monday of May June 19th July 4th 1st Monday of September 2nd Monday of October November 11th 4th Thursday of November December 25th

When one of the above designated legal holidays falls on a Sunday, the following Monday will be observed as a legal holiday. When a legal holiday falls on a Saturday, the preceding Friday is observed as a holiday by U.S. Government Agencies.

(End of clause)

IDENTIFICATION OF CONTRACTOR EMPLOYEES

All contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties, are required to identify themselves as such. All contractor communications made in writing must clearly identify the author as a contractor employee. In contractor communications made via telephone or email (where it is impossible for the other party to view a contractor badge or know that they are not communicating with another Government employee), the contractor must clearly identify themselves as a contractor employee. All contractor email messages must contain the contractor name in full text.

If using ARL mailroom services, the contractor may utilize ARL office symbols only in combination with their contractor name. All name plates displayed on desks and door openings on Government facilities must also include the contractor’s corporate/business name.

ARL regulations are clear that identification badges shall be prominently worn by all personnel at all times while on Government property.

(End of Clause)

GOV’T-CONTRACTOR RELATIONSHIPS

GOVERNMENT-CONTRACTOR RELATIONSHIPS

a. The Government and the contractor understand and agree that the services to be delivered under this contract by the contractor to the Government are non-personal services and the parties recognize and agree that no employer-employee or master-servant relationships exist or will exist under the contract between the Government and the contractor and/or between the Government and the contractor’s employees. It is therefore in the best interest of the Government to afford the parties a full and complete understanding of their respective obligations.

b. Contractor personnel under this contract shall not:

(1) be placed in a position where they are appointed or employed by a Federal Officer, or are under the supervision, direction, or evaluation of a Federal Officer, Military or Civilian.

(2) be placed in a staff or policy making position.

(3) be placed in a position of command, supervision, administration or control over DA Military or Civilian personnel, or personnel of other contractors, or become a part of the Government organization.

(4) be used for the purpose of avoiding manpower ceilings or other personnel rules and regulations of DA or the Civil Service Commission.

(5) be used in administration or supervision of military procurement activities.

c. Employee Relationships:

(1) The services to be performed under this contract do not require the contractor or its employees to exercise personal judgment and discretion on behalf of the Government, but rather the contractor’s employees will act and exercise personal judgment and discretion on behalf of the contractor.

(2) Rules, regulations, directions, and requirements which are issued by command authorities under their responsibility for good order, administration, and security are applicable to all personnel who enter the installation, or who travel on Government transportation. This is not to be construed or interpreted to establish any degree of Government control which is inconsistent with a non-personal services contract.

(End of clause)

EXCEPTIONS IN PROPOSAL

EXCEPTIONS OR CONDITIONS CONTAINED IN OFFEROR'S PROPOSAL

In the event the offeror takes any exceptions to, or sets any conditions for its proposal under the subject solicitation, such exceptions or conditions shall be set forth in a cover letter to the offeror's proposal.

(End of Provision)

ADELPHI CONTR. DIVISION URL

ADELPHI CONTRACTING DIVISION WEBSITE

Offeror(s) may access the Adelphi Contracting Division website at: http://www.arl.army.mil/www/default.cfm?page=509

(End of Provision)

FOREIGN NATIONALS PERFORMING

FOREIGN NATIONALS PERFORMING UNDER CONTRACT

In accordance with Title 8 U.S.C. 1324A, local Foreign Disclosure Officers (FDOs) may approve access by foreign nationals working on unclassified public domain contracts for the duration of the contract, provided the foreign nationals have appropriate work authorization documentation.

Offerors who expect to employ foreign nationals in the anticipated effort shall submit with their proposals documentary evidence verifying employment eligibility of the foreign nationals in accordance with 8 CFR 274a.12. Offerors not employing foreign nationals in performance of any resultant contract may disregard this provision.

For further information, please contact: Army Research Laboratory Adelphi Laboratory Center

ATTN: AMSRL-CS-IO-FI

2800 Powder Mill Road Adelphi, MD 20783-1138

(End of Provision)

PAYMENT TERMS

Payment terms of less than net thirty (30) days are unacceptable. Offers conditioned upon such terms will not be considered for award.

(End of Provision)

DFARS COMMERCIAL CLAUSES

COMMERCIAL ACQUISITION PROVISIONS & CLAUSES (DFARS)

As prescribed in DFARS 212.301, the following provisions and clauses that have been selected are included in this contract by reference. Selection is defined as having a mark in the blank space to the left of the clause title. Unselected clauses are not included in this contract.

____ 52.203-3, Gratuities, as prescribed in FAR 3.202, to comply with 10 U.S.C. 2207.

X 252.203-7005, Representation Relating to Compensation of Former DoD Officials, as prescribed in 203.171-4(b).

_X___ 252.204-7004, DOD Antiterorism Awareness Training for Contractors, as prescribed in DFARS 204.7203.

__X__ 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls, as prescribed in 204.7304(a).

____ 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Information, as prescribed in 204.7304(b).

____ 252.204-7014, Limitations on the Use or Disclosure of Information by Litigation Support Contractors, as prescribed in 204.7403(b), to comply with 10 U.S.C. 129d.

__X__ 252.204-7015, Disclosure of Information to Litigation Support Contractors, as prescribed in 204.7403(c), to comply with 10 U.S.C. 129d.

__X__ 252.204-7016, Covered Defense Telecommunications Equipment or Services—Representation.

__X__ 252.204-7017, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services—Representation.

__X__ 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

__X__ 252.204-7019, Notice of NISP SP 800-171 DOD Assessment Requirements.

__X__252.204-7020, NIST SP 800-171 DOD Assessment Requirements.

____ 252.204-7021, Cybersecurity Maturity Model Certification Requirements.

____ 252.204-7022, Expediting Contract Closeout.

____ 252.205-7000, Provision of Information to Cooperative Agreement Holders, as prescribed in 205.470, to comply with 10 U.S.C. 2416.

____ 252.211-7003, Item Identification and Valuation, as prescribed in 211.274-6(a)(1).

____ 252.211-7006, Passive Radio Frequency Identification, as prescribed in 211.275-3.

____ 252.211-7007, Reporting of Government-Furnished Property, as prescribed in 211.274-6.

____ 252.211-7008, Use of Government-Assigned Serial Numbers, as prescribed in 211.274-6(c).

____ 252.213-7000, Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System—Statistical Reporting in Past Performance Evaluations, as prescribed in 213.106-2-70.

____ 252.215-7003, Requirements for Submission of Data Other Than Certified Cost or Pricing Data—Canadian Commercial Corporation, as prescribed at 215.408(2)(i).

____ 252.215-7004, Requirement for Submission of Data other Than Certified Cost or Pricing Data—Modifications—Canadian Commercial Corporation, as prescribed at 215.408(2)(ii).

____ 252.215-7007, Notice of Intent to Resolicit, as prescribed in 215.371-6.

____ 252.215-7008, Only One Offer, as prescribed in 215.408(3).

____ 252.215-7010, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, as prescribed in 215.408(5)(i).

____ Alternate I as prescribed in 215.408(5)(i)(B).

____ 252.219-7003, Small Business Subcontracting Plan (DoD Contracts), as prescribed in 219.708(b)(1)(A)(1), to comply with 15 U.S.C. 637.

____ Alternate I as prescribed in 219.708(b)(1)(A)(2).

____ Alternate II as prescribed in 219.708(b)(1)(A)(3).

____ 252.219-7004, Small Business Subcontracting Plan (Test Program), as prescribed in 219.708(b)(1)(B), to comply with 15 U.S.C. 637 note.

____ 252.219-7000, Advancing Small Business Growth, as prescribed in 219.309(1), to comply with 10 U.S.C. 2419.

____ 252.219-7012, Competition for Religious-Related Services, as prescribed in 219.270-3.

____ 252.223-7008, Prohibition of Hexavalent Chromium, as prescribed in 223.7306.

____ 252.223-7999 DEVIATION 2021-O0009, Ensuring Adequate COVID-19 Safety Protocols for Federal Contractors, as prescribed in Class Deviation 2021-O0009.

__X__ 252.225-7000, Buy American—Balance of Payments Program Certificate, as prescribed in 225.1101(1)(i), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act.

____ Alternate I as prescribed in 225.1101(1)(ii).

__X__ 252.225-7001, Buy American and Balance of Payments Program, as prescribed in 225.1101(2)(ii), to comply with 41 U.S.C. chapter 83 and Executive Order 10582 of December 17, 1954, Prescribing Uniform Procedures for Certain Determinations Under the Buy-American Act.

____ Alternate I as prescribed in 225.1101(2)(iii).

____ 252.225-7006, Acquisition of the American Flag, as prescribed in 225.7002-3(c), to comply with section 8123 of the DoD Appropriations Act, 2014 (Pub. L. 113-76, division C, title VIII), and the same provision in subsequent DoD appropriations acts.

__X__ 252.225-7007, Prohibition on Acquisition of Certain Items from Communist Chinese Military Companies, as prescribed in 225.1103(4).

____ 252.225-7008, Restriction on Acquisition of Specialty Metals, as prescribed in 225.7003-5(a)(1), to comply with 10 U.S.C. 2533b.

____ 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, as prescribed in 225.7003-5(a)(2), to comply with 10 U.S.C. 2533b.

____ 252.225-7010, Commercial Derivative Military Article—Specialty Metals Compliance Certificate, as prescribed in 225.7003-5(b), to comply with 10 U.S.C. 2533b.

____ 252.225-7012, Preference for Certain Domestic Commodities, as prescribed in 225.7002-3(a), to comply with 10 U.S.C. 2533a.

____ 252.225-7015, Restriction on Acquisition of Hand or Measuring Tools, as prescribed in 225.7002-3(b), to comply with 10 U.S.C. 2533a.

____ 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings, as prescribed in 225.7009-5, to comply with section 8065 of Pub. L. 107-117 and the same restriction in subsequent DoD appropriations acts.

____ 252.225-7017 (DEVIATION 2020-O0019), Photovoltaic Devices, as prescribed in 225.7017-4(a), to comply with section 846 of Pub. L. 111-383.

____ 252.225-7018, Photovoltaic Devices—Certificate, as prescribed in 225.7017-4(b), to comply with section 846 of Pub. L. 111-383.

____ 252.225-7020, Trade Agreements Certificate, as prescribed in 225.1101(5)(i), to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate I as prescribed in 225.1101(5)(ii).

____ 252.225-7021 (DEVIATION 2020-O0019), Trade Agreements as prescribed in 225.1101(6)(i), to comply with 19 U.S.C. 2501-2518 and 19 U.S.C. 3301 note. Alternate I also implements section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate II as prescribed in 225.1101(6)(ii).

____ 252.225-7023, Preference for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-4(a), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7024, Requirement for Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-4(b), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7026, Acquisition Restricted to Products or Services from Iraq or Afghanistan, as prescribed in 225.7703-4(c), to comply with section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ 252.225-7027, Restriction on Contingent Fees for Foreign Military Sales, as prescribed in 225.7307(a), to comply with 22 U.S.C. 2779.

____ 252.225-7028, Exclusionary Policies and Practices of Foreign Governments, as prescribed in 225.7307(b), to comply with 22 U.S.C. 2755.

____ 252.225-7029, Acquisition of Uniform Components for Afghan Military or Afghan National Police, as prescribed in 225.7703-4(d).

____ 252.225-7031, Secondary Arab Boycott of Israel, as prescribed in 225.7605, to comply with 10 U.S.C. 2410i.

____ 252.225-7035 (DEVIATION 2020-O0019), Buy American—Free Trade Agreements—Balance of Payments Program Certificate, as prescribed in 225.1101(9)(i), to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate II (DEVIATION 2020-O0019) as prescribed in 225.1101(9)(iii).

____ Alternate IV (DEVIATION 2020-O0019) as prescribed in 225.1101(9)(v).

____ Alternate V (DEVIATION 2020-O0019) as prescribed in 225.1101(9)(vi).

____ 252.225-7036 (DEVIATION 2020-O0019), Buy American--Free (B) Trade Agreements-- Balance of Payments Program as prescribed in 225.1101(10)(i)(A), to comply with 41 U.S.C. chapter 83 and 19 U.S.C. 3301 note. Alternates II, III, and V also implement section 886 of the National Defense Authorization Act for Fiscal Year 2008 (Pub. L. 110-181).

____ Alternate II (DEVIATION 2020-O0019) as prescribed in 225.1101(10)(i)(C).

____ Alternate IV (DEVIATION 2020-O0019) as prescribed in 225.1101(10)(i)(E).

____ Alternate V (DEVIATION 2020-O0019) as prescribed in 225.1101(10)(i)(F).

____ 252.225-7037, Evaluation of Offers for Air Circuit Breakers, as prescribed in 225.7006-4(a), to comply with 10 U.S.C. 2534(a)(3).

____ 252.225-7038, Restriction on Acquisition of Air Circuit Breakers, as prescribed in 225.7006-4(b), to comply with 10 U.S.C. 2534(a)(3).

____ 252.225-7039, Defense Contractors Performing Private Security Functions Outside the United States, as prescribed in 225.302-6.

____ 252.225-7040, Contractor Personnel Authorized to Accompany U.S. Armed Forces Deployed Outside the United States, as prescribed in 225.371-5(a).

____ 252.225-7043, Antiterrorism/Force Protection Policy for Defense Contractors Outside the United States, as prescribed in 225.372-2.

____ 252.225-7049, Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities—Representations, as prescribed at 225.772-5.

____ 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism, as prescribed in 225.771-5, to comply with 10 U.S.C. 2327(b).

____ 252.225-7051, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services, as prescribed in 225.772-5(b).

____ 252.225-7052, Restriction on the Acquisition of Certain Magnets and Tungsten, as prescribed in 225.7018-5.

__X__ 252.225-7055, Representation Regarding Business Operations with the Maduro Regime, as prescribed in 225.7020-5(a), __X__ 252.225-7055, Prohibition Regarding Business Operations with the Maduro Regime. as prescribed in 225.7020-5(B), ____ 252.225-7974 DEVIATION 2020-O0005, Representation Regarding Business Operations with the Maduro Regime, as prescribed in DEVIATION 2020-O0005.

____ 252.225-7975 DEVIATION 2020-O0001, Additional Access to Contractor and Subcontractor Records, as prescribed in 225.371-5.

____ 252.225-7976 DEVIATION 2018-O0019, Contractor Personnel Performing in Japan, as prescribed in 225.371-5.

____ 252.225-7980 DEVIATION 2016-O0008, Contractor Personnel Performing in the United States Africa Command Area of Responsibility, as prescribed in 225.371-5.

____ 252.225-7993 DEVIATION 2020-O0001, Prohibition on Providing Funds to the Enemy, as prescribed in 225.371-5.

____ 252.225-7996 DEVIAION 2020-O0002, Acquisition Restricted to Products or Services from Afghanistan, a Central Asian State, Pakistan, or the South Caucasus, as prescribed by DEVIAION 2020-O0002.

____ 252.225-7998 DEVIAION 2020-O0002, Preference for Products or Services from Afghanistan, a Central Asian State, Pakistan, or the South Caucasus, as prescribed by DEVIAION 2020-O0002.

____ 252.225-7999 DEVIAION 2020-O0002, Requirement for Products or Services from Afghanistan, a Central Asian State, Pakistan, or the South Caucasus, as prescribed by DEVIAION 2020-O0002.

____ 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns, as prescribed in 226.104, to comply with section 8021 of Pub. L. 107-248 and similar sections in subsequent DoD appropriations acts.

____ 252.226-7002, Representation for Demonstration Project for Contractors Employing Persons with Disabilities.

____ 252.227-7013, Rights in Technical Data–Noncommercial Items, as prescribed in 227.7103-6(a), to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq.

____ Alternate I as prescribed in 227.7103-6(b)(1).

____ Alternate II as prescribed in 227.7103-6(b)(2).

____ 252.227-7015, Technical Data–Commercial Items, as prescribed in 227.7102-4(a)(1), to comply with 10 U.S.C. 2320, to comply with 10 U.S.C. 7317 and 17 U.S.C. 1301, et. seq.

____ Alternate I as prescribed in 227.7102-4(a)(2), ____ 252.227-7037, Validation of Restrictive Markings on Technical Data, as prescribed in 227.7102-4(c).

____ 252.232-7009, Mandatory Payment by Government-wide Commercial Purchase Card, as prescribed in 232.1110.

_X___ 252.232-7010, Levies on Contract Payments, as prescribed in 232.7102.

____ 252.232-7011, Payments in Support of Emergencies and Contingency Operations, as prescribed in 232.908.

____ 252.232-7014, Notification of Payment in Local Currency (Afghanistan), as prescribed in 232.7202.

_X__ 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel, as prescribed in 237.173-5, to comply with section 1038 of Pub. L. 111-84.

____ 252.237-7019, Training for Contractor Personnel Interacting with Detainees, as prescribed in 237.171-4, to comply with section 1092 of Pub. L. 108-375.

____ 252.239-7009, Representation of Use of Cloud Computing, as prescribed in 239.7604(a).

____ 252.239-7010, Cloud Computing Services, as prescribed in 239.7604(b).

____ 252.239-7017, Notice of Supply Chain Risk, as prescribed in 239.7306(a).

____ 252.239-7018, Supply Chain Risk, as prescribed in 239.7306(b), to comply with section 806 of Pub. L. 111-383, in all solicitations and contracts involving the development or delivery of any information technology, whether acquired as a service or as a supply.

____ 252.243-7002, Requests for Equitable Adjustment, as prescribed in 243.205-71, to comply with 10 U.S.C. 2410.

_X__ 252.244-7000, Subcontracts for Commercial Items, as prescribed in 244.403.

____ 252.246-7003, Notification of Potential Safety Issues, as prescribed in 246.370(a).

____ 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations, as prescribed in 246.270-4, to comply with section 807 of Pub. L. 111-84.

___ 252.246-7008, Sources of Electronic Parts, as prescribed in 246.870-3(b), to comply with section 818(c)(3) of Pub. L. 112-81, as amended by section 817 of the National Defense Authorization Act for Fiscal Year 2015 (Pub. L. 113-291).

____ 252.247-7003, Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer, as prescribed in 247.207, to comply with section 884 of Pub. L. 110-417.

____ 252.247-7022, Representation of Extent of Transportation by Sea, as prescribed in 247.574(a).

__X__ 252.247-7023, Transportation of Supplies by Sea, as prescribed in 247.574(b)(1), to comply with the Cargo Preference Act of 1904 (10 U.S.C. 2631(a)).

____ Alternate I as prescribed in 247.574(b)(2).

____ Alternate II as prescribed in 247.574(b)(3).

____ 252.247-7025, Reflagging or Repair Work, as prescribed in 247.574(d), to comply with 10 U.S.C. 2631(b).

____ 252.247-7026, Evaluation Preference for Use of Domestic Shipyards – Applicable to Acquisition of Carriage by Vessel for DoD Cargo in the Coastwise or Noncontiguous Trade, as prescribed in 247.574(e), to comply with section 1017 of Pub. L. 109-364.

____ 252.247-7027, Riding Gang Member Requirements, as prescribed in 247.574(f), to comply with section 3504 of the National Defense Authorization Act for Fiscal Year 2009 (Pub. L. 110-417).

____ 252.247-7028, Application for U.S Government Shipping Documentation/Instructions, as prescribed in 247.207.

(End Of Clause) 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021).

As prescribed in 4.2105(a), insert the following provision:

Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) Representation. The Offeror represents that—

(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision) 52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (OCT 2020) As prescribed in 4.2105(c), insert the following provision:

Covered Telecommunications Equipment or Services-Representation (Oct 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c) (1) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it □ does, □ does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision) 52.252-1 Solicitation Provisions Incorporated by Reference.

As prescribed in 52.107(a), insert the following provision:

Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

FAR:

https://www.acquisition.gov/browse/index/far

DFARS:

https://www.acquisition.gov/dfars (End of provision) 52.252-2 Clauses Incorporated by Reference.

As prescribed in 52.107(b), insert the following clause:

Clauses Incorporated By Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR:

https://www.acquisition.gov/browse/index/far

DFARS:

https://www.acquisition.gov/dfars (End of clause)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023).

As prescribed in 5211.274-5 (a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause— “Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means—

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

“DoD item unique identification” means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number Item Description ____N/A_______________________________________________________________

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number Item Description ___N/A________________________________________________________________ (If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International…