Product Item Description.pdf

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014441229

REFERENCE NUMBER:ZD074

EYEGUARD, OPTICAL INSTRUMENT

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CS120

CRITICAL APPLICATION ITEM

RUBBERCRAFT CORPORATION OF CALIFORNIA, 77969 P/N CMI525‐ITT‐001

IAW BASIC DRAWING NR 1X4F3 AMSCBDOC

REVISION NR DTD 03/07/2007

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1E

QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:00 ‐00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export‐control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS

252.225‐7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export‐control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export‐Controlled Technical Data Training and the DLA Export‐Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export‐controlled data. Instructions for obtaining access to the export‐controlled data can be found at:

https://www.dla.mil/Logistics‐Operations/Enhanced‐Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export‐controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export‐controlled data.

REFERENCE NUMBER CS120

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING. OFFERORS WHO ARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100‐003D).

REFERENCE NUMBER ZD074

THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM ‐ (TO INCLUDE 'COMMERCIAL

OF A TYPE')

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER A0003

MIL‐STD‐130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY