Product_File.pdf

365 South Holland Drive Tel 706 693 2226 Fax 706 693 4400 Pendergrass, GA 30567 Tel 888 795 0808 www.tencate.com

FGS000351

ETQR72

TENCATE GEOSYNTHETICS

Americas

GAI-LAP-25-97

Mirafi® 180N is a needlepunched nonwoven geotextile composed of polypropylene fibers, which are formed into a stable network such that the fibers retain their relative position.

Mirafi® 180N is inert to biological degradation and resists naturally encountered chemicals, alkalis, and acids. Mirafi® 180N meets AASHTO M288 Class 1 for Elongation > 50%.

TenCate Geosynthetics Americas Laboratories are accredited by Geosynthetic Accreditation Institute – Laboratory Accreditation Program (GAI-LAP). NTPEP Listed

Mechanical Properties Test Method Unit

Minimum Average Roll Value

MD CD

Grab Tensile Strength ASTM D4632 lbs (N) 205 (912) 205 (912)

Grab Tensile Elongation ASTM D4632 % 50 50

Trapezoid Tear Strength ASTM D4533 lbs (N) 80 (356) 80 (356)

CBR Puncture Strength ASTM D6241 lbs (N) 500 (2224)

Maximum Opening Size

Apparent Opening Size (AOS) ASTM D4751 U.S. Sieve (mm) 80 (0.18)

Minimum Roll Value

Permittivity ASTM D4491 sec-1 1.4

Flow Rate ASTM D4491 gal/min/ft2 (l/min/m2) 95 (3870)

Minimum Test Value

UV Resistance (at 500 hours) ASTM D4355 % strength retained 70

Physical Properties Unit Roll Sizes

Roll Dimensions (width x length) ft (m) 12.5 x 360 (3.8 x 110) 15 x 300 (4.57 x 91.4)

Roll Area yd2 (m2) 500 (418)

Disclaimer: TenCate assumes no liability for the accuracy or completeness of this information or for the ultimate use by the purchaser. TenCate disclaims any and all express, implied, or statutory standards, warranties or guarantees, including without limitation any implied warranty as to merchantability or fitness for a particular purpose or arising from a course of dealing or usage of trade as to any equipment, materials, or information furnished herewith. This document should not be construed as engineering advice.

Mirafi® is a registered trademark of Nicolon Corporation. Copyright © 2015 Nicolon Corporation. All Rights Reserved.

Mirafi® 180N http://www.tencate.com/ http://gmanow.com/ http://www.geosynthetic-institute.org/ http://www.geosynthetic-institute.org/ http://data.ntpep.org/Module/GTX/Data.aspx

Aqualine™ 41/2" x 9" is a paver featuring not only the environmentally friendly benefits of a permeable paver, but also high visual appeal, low maintenance and proven durability. Aqualine’s versatile pattern range when combined with additional sizes allows for flexible design options, making it an excellent choice for machine or hand installed plazas, sidewalks, parking lots, alleyways and roadways.

AqualineTM 4½" x 9" Permeable Paver

AqualineTM 41/2" x 9"

Approximate Dimensions

Paver 41/2" x 9"

Available Thickness:

31/8" (80 mm)

Half Paver* 41/2" x 41/2"

*When available in a Herringbone pallet configuration

Belgard permeable pavers can be used for a variety of different vehicular applications.

Appropriate shape and thickness is based on project-specific conditions, including type of loading, base design, and subgrade conditions. It is recommended that you consult a Belgard Representative when specifying products for vehicular applications.

Check available options with your local Belgard Sales Representative

Oldcastle® Architectural Three Glenlake Pkwy Atlanta, GA 30328 877-235-4273

For more info visit: Belgardcommercial.com

Get Social Facebook.com/OutdoorLivingbyBelgard

Belgard.com/Blog

Twitter.com/Belgard

YouTube.com/BelgardHardscapes

Pinterest.com/Belgard

Instagram.com/BelgardOutdoorLiving

© 2018 Oldcastle. All Rights Reserved. BELCOMM18-100 4/18

Benefits of AqualineTM 4½" x 9":

Belgard’s Aqualine permeable pavement systems can eliminate stormwater runoff and improve water quality

• Interlocking spacer bars for increased structural performance

• Smooth surface texture with a micro-chamfer to minimize vibration and enhance wheelchair comfort

• Can be utilized to construct an ADA-compliant pavement

• True installed dimensions for design optimization

• Optimal joint openings for infiltration and maintenance

• Meet the requirements of ASTM C936

Benefits by the numbers:

• Chamfer Width: 3 mm

• Spacer Bar Width: 10 mm

• Surface Infiltration Rate: > 500 inches per hour (varies based on joint infill gradation)

• Surface Open Area: 10%

Pallet Layers:

Customer Service (704) 841-6000 backflow.apollovalves.com42

STANDARD MATERIALS LIST

BODY Lead Free Bronze C87800

TAILPIECE Lead Free Brass C46500

UNION NUT Brass C36000

CHECK MODULES Acetal (3/4”-1”)

SPRINGS Stainless Steel

SEAT DISCS Buna-N (3/4”-1”) Contact local water authorities for installation/service requirements.

METER THREAD SIZING

5/8” METER 3/4”

3/4” METER 1”

1” METER 1-1/4”

UNION X NPT

METER SWIVEL X NPT

The Apollo DUCLF 4A Series Dual Check Valve Backflow Preventer is designed to prevent cross-connections of non-potable water (non-hazardous) into safe drinking water systems.

It is a compact and economical device that consists of two independently-acting, spring-loaded check valves in a corrosion-resistant material.

OPERATION

Each of the two spring-loaded check valves is designed to open at 1 psi differential in the direction of flow. The check valves will remain tightly closed until there is a demand for water downstream. If the downstream pressure of the device increases above the supply pressure or there is a reverse direction of flow, the check valves will close to prevent backflow. If the second check valve is prevented from closing tightly, the first check will close to provide protection from a backflow condition.

DUCLF 4A SERIES

DUAL CHECK VALVE BACKFLOW PREVENTER

FEATURES

• Low Head Loss

• Independently-Acting Captured Spring

Check Valves

• Compact and Lightweight

• Corrosion Resistant

• Replaceable Check Modules

• Industry Lay Lengths

• Available in Standard and Swivel Types

• 5 Year Warranty

PERFORMANCE RATING

• Maximum Working Pressure: 175 psi

• Operating Temperature Range: 33° to 180°F

APPROVALS

• ASSE 1024

• CSA B64.6

• NSF/ANSI 372 - Lead Free (4ALF only)

DIMENSIONS

SIZE

(IN.)

DIMENSIONS (IN.) WT.

(LB.)A B

1/2” 4.38 2.00 1.40

3/4” 4.38 2.00 1.40

3/4” Meter Swivel 4.75 2.00 1.60

1” 4.38 2.00 1.40

1” Meter Swivel 4.75 2.00 1.75

PART NUMBER MATRIX

4ALF [X] 3 X X X X X

UNION INLET CONNECTION1,2 INLET AND OUTLET SIZE OUTLET CONNECTION1,2 FINISH

4ALF - Lead Free A - FNPT 3 - 1/2" A - FNPT Blank - Satin Brass

B - MNPT 4 - 3/4” B - MNPT

C - Female Meter Thread 5 - 1”

S - Female Meter Swivel 6 - 1-1/4” (Meter Thread sizing for 1” meter swivel)

EXAMPLE: 4ALF 3S54A = Lead Free Dual Check with Female Swivel 1” Inlet (for 3/4” meter connection x 3/4” FNPT outlet) 1 For meter threads, order one size larger than meter size. (i.e.- 4ALF3S54A = 1” Female Meter Swivel Inlet (for connection to 3/4” meter) x 3/4” FNPT outlet 2 Not all inlet and outlet combinations are available. Please contact Apollo Customer Service for availability.

Flow Curves - Page 67 www.nibco.com A H E A D O F T H E F L O W ®

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227

TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com

LEAD-FREE: Weighted average lead content ≤ 0.25%

Size range: 1/2” - 2” Pressure rating: 250 psi non-shock cold working pressure* Body design pressure: 1,000 psi non-shock cold working pressure Maximum pressure / temperature: 225 psi at 250° F*

Lead-free markings: Double oval in body casting, white handle and blue hang tag

Features: Silicon Performance Bronze® Alloy • Laser-Welded Cast Body • Triple-Sealed Stem • Stainless Trim • Reversible Handle • Easily Adjustable Packing Nut • Blowout-Proof Stem • Press Ends Leak Detection Approvals: MSS-SP110/145 • IAPMO/ANSI Z1157 • NSF/ANSI/CAN 61-8 Commercial Hot 180° F •

NSF/ANSI 372 • ICC-ES PMG-1558 • ASME A112.4.14/CSA B125.14

MATERIAL LIST

PART SPECIFICATION

1. Handle Nut Carbon Steel, GEOMET® Coated

2. Handle Stop ASTM A276 S31600 Stainless Steel

3. Stem ASTM A276 S31600 Stainless Steel

4. Packing PTFE

5. Packing Nut ASTM B16 C36000 Brass

6. Stem O-ring (2) Qmonix® EPDM

7. O-ring (2) EPDM - Leak Detection

8. Boss Seal O-ring (2) EPDM

9. Body ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

10. Seats (2) Reinforced PTFE

11. Ball ASTM A276 S31600 or A351 CF8M Stainless Steel

12. Body End Piece ASTM B584 C87500 DZR Lead-free Silicon Bronze Casting

13. Press End Adapter (2) ASTM B75 Alloy C12200 Wrot Copper

14. Handle Carbon Steel, GEOMET® Coated, Plastisol Grip

NIBCO® 585HP Lead-Free Bronze Ball Valves

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

*NIBCO® Press System ball valves are designed to meet MSS SP-110 with the exception of the end connection. Ball valves are down-rated from 1000 psi CWP to 250 psi CWP to match the Press System.

GEOMET® is a registered trademark of NOF Metal Coatings, Inc.

QMONIX® is a trademark of Quadion LLC

DIMENSIONS - WEIGHTS

Size A B C D E F G Weights

In. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. lbs. kg 1/2” 5.93 151 4.04 103 2.03 52 2.66 68 0.50 13 3.77 96 2.37 60 0.80 0.36 3/4” 6.65 169 4.18 106 2.31 59 3.17 81 0.75 19 4.93 125 3.01 76 1.21 0.55 1” 7.35 187 4.75 121 2.74 70 3.78 96 1.00 25 5.19 132 3.42 87 1.58 0.72

11/4” 7.95 202 5.06 129 2.92 74 4.12 105 1.25 32 5.78 147 3.76 96 2.27 1.03 11/2” 10.25 260 6.75 171 3.22 82 4.64 118 1.50 38 7.01 178 4.24 108 3.55 1.61 2” 11.03 280 7.12 181 3.68 93 5.46 139 2.00 51 7.80 198 4.78 121 6.26 2.84

PC-585HP-66-LF

PC-585HP-66-LF

Press

Handle Markings

O

FF 585HP

Patent US 10,234,043 & Patent Pending M S

S -S

P -1

/1

IA

P M

O /A

N S

I Z

N

S F/

A N

S I/C

A N

PATENT US 10,234,043

& PATENT PENDING

Revised 1/3/2020

Revision 2/2018 ©2018 Oldcastle, Inc.

oldcastleenclosures.com

(800) 735-5566 OLDCASTLE POLYMER DURABILITY DELIVERED THROUGH INNOVATION.

(formerly H-Series™)

OLDCASTLE POLYMER 1324

Material:

Model:

Weight:

Wall Type:

Performance:

BODY

COVER

Style:

Material:

Model:

Weight:

Std. Fasteners:

Options:

Surface:

Performance:

Flush Solid Polymer Concrete 13” x 24” Tier 15: 38 lbs.

Tier 22: 51 lbs.

1/2-13 Stainless Steel Hex Head Bolt, Washer and Floating Nut

Logos and Special Markings Slip Resistant

ANSI/SCTE-77,

Tier 15 or Tier 22*

Polymer Concrete 13” x 24” 12” Depth: 51 lbs.

18” Depth: 69 lbs.

24” Depth: 88 lbs.

Straight ANSI/SCTE-77 Tier 22

Bolt Down Detail

For use in non-vehicular traffic situations only.

Actual load rating is determined by the box and cover combination.

Weights and dimensions may vary slightly.

Medium Duty:

Incidental, Non-deliberate Traffic

Heavy Duty: Incidental, Non-deliberate Traffic

Based upon lid and body combination, this unit can be Tier 15 or Tier 22.

* T22 rating when paired with T22 polymer concrete lid.

Cover comes standard with permanent markings for manufacturer, load rating, model size and manufacturing location.

A B C D E

1324-12 12 13-1/2 23 20-7/8 11-3/8

1324-18 18 13-3/8 22-7/8 20-5/8 11-1/8

1324-24 24 13-1/4 22-3/4 20-3/8 10-7/8

Revision 2/2018

All information contained on this sheet is current at the time of publication.

Oldcastle reserves the right to discontinue or update product information without notice. ©2018 Oldcastle, Inc.

oldcastleenclosures.com

(800) 735-5566 OLDCASTLE POLYMER DURABILITY DELIVERED THROUGH INNOVATION.

(formerly H-Series™)

OLDCASTLE POLYMER 1324

AVAILABLE POLYMER COVER:

Flush Solid

AVAILABLE STEEL COVER:

One Piece

FASTENER OPTIONS FOR COVERS:

Penta Head Bolt Oldcastle Enclosures Vandal Resistant Bolt Penta Coil Thread Bolt Captive Bolt Retainer

ADD ON OPTIONS:

EMS Marker (E) Mouseholes/Knockouts Rack Mount (A) Cable Racks/Cable Arms (B) Unistrut (C) Pulling Eye - 1,000 lb and 3,000 lb (D) Ground Buss (F) Dividers Racking Provision Lid Gaskets* Solid Bottom

*Lid Gaskets inhibit water flow into the box, they do not make enclosure fully waterproof.

A B C D E F

Hex Head

Penta Head

Vandal

Resistant

OPTIONS

NOTES Actual load rating is determined by the box and cover combination.

Weights and dimensions may vary slightly

(formerly H-Series™)

PRODUCT

LOAD RATING

Medium Duty: Incidental, Non-deliberate traffic For use in non-vehicular traffic situations only. Actual load rating is determined by the box and cover combination.

Heavy Duty: Incidental, Non-deliberate traffic For use in non-vehicular traffic situations only. Actual load rating is determined by the box and cover combination.

ADS Service: ADS representatives are committed to providing you with the answers to all your questions, including specifications, and installation and more.

n-12® St ib pipe (per AASHtO) N-12 pipe offers significant performance advantages, plus the best soil-tight joint in the industry. Available in diameters from 4”-60” (100-1500 mm), N-12 pipe is replacing reinforced concrete pipe as a preferred product for storm water applications.

ADS N-12 pipe contains a superior built-in bell-and-spigot joint. The joints are sealed by high-quality, factory-installed gaskets that meet all the requirements of ASTM F477. A reinforced polyethylene bell minimizes joint distortion. The chipping and cracking that is common to concrete bells is eliminated.

ApplicAtionS:

Storm Sewers Slope/Edge Drains Retention/Detention Mining/Forestry/Industrial Golf, Turf & Recreation Foundation Drains Culverts/Cross Drains Downspouts/Roof Drainage Grain Aeration Land Reclamation Waterways Terracing Ditch Enclosures

FeAtureS:

beneFitS:

• Variety of diameters and lengths fit any project

• Joint only requires lube for fitting - ends are pushed together for easy field installation

• Unlike pipe from other manufacturers, there are no additional gasket materials, grout or sealing bands to transport and apply

• Installation cost savings from lower shipping costs, fewer people, and less heavy equipment required.

• The reinforced polyethylene bell minimizes distortion, chipping and cracking common to concrete pipe bells

The MosT AdvAnced NaMe iN waTer MaNageMeNT soluTioNs TM

ADS “Terms and Conditions of Sale” are available on the ADS website, www.ads-pipe.com The ADS logo, the Green Stripe, and N-12® are registered trademarks of Advanced Drainage Systems, Inc.

© 2018 Advanced Drainage Systems, Inc. #10581 09/18 MH

ADS n-12® St ib pipe (per AASHtO) SpeCiFiCAtiOn SCOpe This specification describes 4- through 60-inch (100 to 1500 mm) ADS N-12 ST IB pipe (per AASHTO) for use in gravity flow drainage applications.

pipe reQuireMentS

jOint perFOrMAnCe Pipe shall be joined using a bell & spigot joint meeting AASHTO M252, AASHTO M294, or ASTM F2306. The joint shall be soil-tight and gaskets, when applicable, shall meet the requirements of ASTM F477. Gaskets shall be installed by the pipe manufacturer and covered with a removable wrap to ensure the gasket is free from debris. A joint lubricant supplied by the manufacturer shall be used on the gasket and bell during assembly.

FittinGS Fittings shall conform to AASHTO M252, AASHTO M294 or ASTM F2306.. Bell and spigot connections shall utilize a spun-on or welded bell and valley or saddle gasket meeting the soil-tight joint performance requirements of AASHTO M252, AASHTO M294 or ASTM F2306.

MAteriAl prOpertieS Material for pipe and fitting production shall be high-density polyethylene conforming with the minimum

1500mm) pipe material shall comply with the notched constant ligament-stress (NCLS) test as specified in Sections 9.5 and 5.1 of AASHTO M294 and ASTM F2306, respectfully.

inStAllAtiOn

material and compaction level; please refer to Technical Note 2.01. Contact your local ADS representative or visit our website at www.ads-pipe.com for a copy of the latest installation guidelines.

pipe DimenSionS

Advanced Drainage Systems, Inc.

4640 Trueman Blvd., Hilliard, OH 43026 1-800-821-6710 www.ads-pipe.com

(200)

9.1 (231)

(150)

6.9 (175)

(100)

4.8 (122)

18 24

(450) (600)

(559)

(375)

(457)

(300)

14.5 (368)

(250)

11.4 (290)

(750)

(914)

(900)

(1067)

(1050)

(1219)

(1200)

(1372)

(1500)

(1702)

Nominal Pipe I.D.* in.

(mm)

Nominal Pipe O.D.** in.

(mm)

*Check with sales representative for availability by region.

**Pipe O.D. values are provided for reference purposes only, values stated for 12- through 60-inch are ±1 inch. Contact a sales representative for exact values.

(711)

54* (1350)

(1549)

Bell Wrap pitch aStM F477 GaSket

Flare O.D.

pipe O.D.

12”-60”

(300-1500 mm)

The MosT AdvAnced NaMe iN waTer MaNageMeNT soluTioNs TM