PRE AWARD CHECKLIST FOR CALIBRATION REQUIREMENTS.pdf

Solicitation Reference Number: ___________________________

Interested Vendor: _________________________________________

The vendor shall “check” either “Yes” or “No” on all of the items below, referring to whether they are or are not capable of providing calibration, or subcontracting out calibration, of the referenced electronic item. A brief explanation may be provided explaining how the vendor would perform calibration (i.e. by deploying a technician to perform the calibration on-site, or by performing the calibration at their own facility, or by subcontracting out the item to “x” company, located in ________).

Checklist for Calibration Requirements:

Capable of Calibrating? Item Unique Characteristics

Brief explanation (if required)

Yes No

(1) Corning Tropel Artifact

Model 124894 Only authorized source of calibration is LBD Corporation, www.lbdcorp.com

(2) Corning Tropel Artifact Model 122350

Only authorized source of calibration is LBD Corporation, www.lbdcorp.com

(3) Flow Sensor/Block Model F6204-AIB-T5

Requires CAL CERT with 5 points of data

(4) Flow Sensor/Block Model F6202-AIB-T1

Requires CAL

(5) Temp Sensor Model F6310

Requires CAL

(6) Temp Sensor Model F6310

Requires CAL

(7) Pressure Sensor Model F6301-5K

Requires CAL

(8) Pressure Sensor Model F6301-1K

Requires CAL

(9) Touch Screen Controller Com-Tech Model CTC7095F with Load Cell Model TSB2000 CTC7095F

Needs calibration performed on-site at Letterkenny Army Depot

(10) Balancing machine – American Hofmann model

PCB-11.1

Needs calibration performed on-site at Letterkenny Army Depot