Statement_of_Work_2019_TFLEX_boards.docx

July 24, 2019

Statement of Work (SOW) TFLEX board build

Vendor must adhere to all dimensions and to the specified quality of construction. No substitutions of specified materials will be accepted. Vendor is permitted to propose fabrication and/or assembly techniques, or changes to the Bill of Materials (BOM) if components or materials are not available.

All proposed changes must be reviewed and approved by the contracting officer prior to implementation.

The vendor shall furnish the necessary personnel, material, equipment, services, shipping and facilities (except as otherwise specified), to perform the following statement of work/specifications.

1) All work, fabrication, assembly must be performed by a U.S based company

2) All the above must be performed within the U.S.

3) Unless stated otherwise in the BOM, The vendor will supply all the necessary components.

4) The vendor will solder all of the components to the PCBs

5) If parts are obsolete or otherwise unobtainable, NOAA will supply the part.

6) Vendor shall include any required Non-Reoccurring Engineering (NRE) charges in the quote.

7) Proposals will be evaluated on technical capabilities and as well as cost.

8) A statement or proposal indicating the vendor’s technical capabilities to manufacture/assemble the Printed Circuit Boards (PCB) is encouraged.