PID Packaging and Marking.pdf

DAS0038PID‐PACK20201014150757

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:014596479

ACCESSORY KIT,VEHIC

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

Contractor FAT required I/A/W DWG 19207_12420023 Notes 8 and 9.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD080

IAW BASIC DRAWING NR 19207 57K1924

REVISION NR C DTD 02/23/2012

PART PIECE NUMBER: 57K1924‐001

IAW REFERENCE DRAWING NR 19207 12420025

REVISION NR G DTD 01/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421716

REVISION NR C DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422305

REVISION NR C DTD 09/30/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420024

REVISION NR H DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420325

REVISION NR J DTD 04/08/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12378482

REVISION NR F DTD 04/21/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420022

REVISION NR K DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420023

REVISION NR J DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420274

REVISION NR B DTD 10/26/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420275

REVISION NR E DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420276

REVISION NR B DTD 04/04/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420277

REVISION NR K DTD 11/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421693

REVISION NR C DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422280

REVISION NR C DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422999

REVISION NR DTD 11/13/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 97403 13228E1631

REVISION NR K DTD 03/06/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 97403 13228E1633

REVISION NR K DTD 06/03/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420301

REVISION NR E DTD 01/06/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422292

REVISION NR D DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420280

REVISION NR B DTD 03/02/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420289

REVISION NR F DTD 03/31/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422279

REVISION NR F DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420291

REVISION NR E DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422320

REVISION NR C DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421717

REVISION NR C DTD 09/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420288

REVISION NR F DTD 03/31/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K1924

REVISION NR D DTD 04/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K1924‐001

REVISION NR DTD 01/08/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 ECP‐0048

REVISION NR DTD 04/28/2020

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA ‐ MIL‐STD‐2073‐1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL‐STD‐129.

SPECIAL MARKING CODE:ZZ ‐ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:CS259

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export‐control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225‐7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export‐control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export‐Controlled Technical Data Training and the DLA Export‐Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export‐controlled data. Instructions for obtaining access to the export‐controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export‐controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export‐controlled data.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON‐MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL‐STD‐1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL‐STD‐1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL‐STD‐105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON‐CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL‐STD‐2073‐1 APPENDIX D,

FOR PACKAGING OF "KITS".