PID PACK--SPE7LX21RX059.pdf

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:012044376

MAGAZINE,CARTRIDGE

REFERENCE NUMBER:RA001

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN

ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22

U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS

(DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE

REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS

INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED

WILL MAKE A QUOTE/ OFFER INELIGIBLE FOR AWARD." _______________EXCEPTION

DATA____________________ IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED. DRAWING 9346413: FUNCTION

TEST APPLIES TO MAGAZINES OBTAINED AS SPARES. FOR MAGAZINES OBTAINED

WITH M9 PISTOLS, REFERENCE MIL-P-48655. THE TDP CONTAINS GAGE DRAWINGS

THAT ARE TO BE CONSIDERED "FOR INFORMATIONAL PURPOSES ONLY" AND ARE NOT

UP TO DATE WITH THE LATEST DRAWING REVISION. THE USE OF GAGES IS

OPTIONAL AND NOT A REQUIREMENT. GAGES CAN BE REPLACED WITH STANDARD

MEASURING & TEST EQUIPMENT. DWG 12993884, REV J (QAP): PG. 2 PARA C. (1)

CHANGE FROM: FIRST ARTICLE TEST/INSPECTION: UNLESS WAIVED BY THE CURRENT

DESIGN ACTIVITY, A FIRST ARTICLE IS REQUIRED. CHANGE TO: FIRST ARTICLE

TEST/INSPECTION: WHEN SPECIFIED IN THE CONTRACT, A FIRST ARTICLE TEST IS

REQUIRED. ______________END OF EXCEPTIONS________________ _______SPECIAL

GFE AND GFM REQUIREMENTS________ THIS ITEM REQUIRES GOVERNMENT FURNISHED

EQUIPMENT (GFE) AND GOVERNMENT FURNISHED MATERIAL (GFM). SEE BELOW FOR

SPECIAL CONTRACT REQUIRMENTS: A.EQUIPMENT AND MATERIAL REQUIRED FOR

CONTRACTOR'S USE FOR CONTRACTOR PLT: 1. 1 EACH - M9 PISTOL - NSN

1005-01-118-2640. 2. 30 EA M882 9MM AMMO - DODIC: A363 - NSN

1305-01-470-2090, FOR EACH MAGAZINE TESTED. B. A SECURITY PREAWARD

SURVEY IS REQUIRED FOR THESE ITEMS. DFARS, PART 252.223-7007,

"SAFEGUARDING SENSITIVE CONVENIONAL ARMS, AMMUNITION AND EXPLOSIVES"

SHALL BE PART OF THE SOLICITATION/CONTRACT. C. THIS CONTRACT INVOLVES

HAZARDOUS MATERIAL. DFARS 252.223.7002, SAFETY PRECAUTIONS FOR

AMMUNITION AND EXPLOSIVES, DFARS 252.223.370-R, PGI 223.370-4 (1) (IV),

SAFETY PRECAUTIONS FOR AMMUNITION AND EXPLOSIVES- PREAWARD SURVEY, AND

DFARS 252.223.370, PGI 223.370-4 (1)(III), DISPOSAL OF REMAINING OR

TERMINATION INSTRUCTIONS, SHALL BE PART OF THE SOLICITATION/ CONTRACT.

____END OF SPECIAL GFE AND GFM REQUIREMENTS____ THE ITEM BEING PROCURED

IS A CRITICAL GUN PART ITEM WITH UNIQUE REQUIREMENTS. CONTRACTOR FAT

APPLIES. AFTER RECEIPT OF QUOTES, OFFERORS MAY BE CONTACTED TO PRICE THE

FAT REQUIREMENT. PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL

BE APPROVED BY THE CONTRACT POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA QAR AT THE ACTUAL

MANUFACTURER'S FACILITY. THE IDENTIFICATION OF THE ACTUAL MANUFACTURER

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

AND PHOSPHATE CONTRACTOR MUST BE SUBMITTED TO THE CONTRACTING OFFICER

FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION. PRODUCT

VERIFICATION TESTING (PVT) IN ACCORDANCE WITH PROCUREMENT NOTE E05, MAY

BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE (1)

SAMPLE MAY BE DESTROYED DURING TESTING. PRODUCT VERIFICATION TESTING, IF

INVOKED, WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. THE

CONTRACTOR MUST PROVIDE PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED IN

THE PRODUCTION OF PARTS ON THIS CONTRACT. FIVE (5) PVT SAMPLES, UNLESS

OTHERWISE SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED TO THOSE

(SUB)CONTRACTORS WHEN THEY ARE SENT IN FOR TESTING. CERTIFICATE OF

CONFORMANCE IS NOT AUTHORIZED. CONTRACTOR PRODUCTION LOT TESTING APPIES

IAW DWG 9346413 (19200). VL-II IS ACCEPTABLE FOR THE VARIABLE SAMPLING

PLAN FOR THIS TESTING. LOT SIZE,,,,,,EXHIBITS TESTED 2-170,,,,,,,,9

171-288,,,,,,,,9 289-544,,,,,,,,9 545-960,,,,,,,,11 961-1632,,,,,,,,13 1633-3072,,,,,,15 3073-5440,,,,,,18 5441-9216,,,,,,18 9217-17408,,,,,,18

17409-30720,,,,,,18 30721 OR MORE,,,,18

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:R2254

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 9346413

REVISION NR H DTD 09/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346507

REVISION NR DTD 09/14/1987

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346414

REVISION NR N DTD 07/29/2014

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346415

REVISION NR F DTD 08/06/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346416

REVISION NR H DTD 07/29/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346418

REVISION NR R DTD 02/23/2015

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-16232H(1)

REVISION NR H DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE UNK DI-NDTI-80809B NOT 2

REVISION NR B DTD 12/11/2019

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-32033-6 NOT 1

REVISION NR 6 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346413

REVISION NR E DTD 02/19/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346413

REVISION NR DTD 02/06/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9346413

REVISION NR H DTD 09/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 L09S2066

REVISION NR DTD 08/04/2009

PART PIECE NUMBER:

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

IAW REFERENCE DRAWING NR 19200 L17S315

REVISION NR DTD 02/02/2017

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:C

UNIT CONT:BL OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

SPECIAL PACKAGING INSTRUCTION (SPI) 9346413, WITH

CHANGES DOES NOT APPLY TO THIS PROCUREMENT, BUT

IT CAN BE USED AS GUIDANCE FOR PACKAGING

REQUIREMENTS.

CHANGES TO SPI 9346413; CHANGE SPEC "MIL-B-117,

TY - I, CL - B" TO "MIL-DTL-117, TYPE III, CLASS B."

REFERENCE NUMBER:IP025

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER R2254

1 BX = 10 EA

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM]

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ZL006

This item contains a phosphate coating requirement IAW MIL-STD-171 and MIL-DTL-16232. In lieu of the required submittal of a preproduction phosphate procedure the following is now required: The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the Nadcap standard for the Phosphate chemical processes. Verification of this certification may be required and must be supplied upon request of the Contracting Officer.

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in file:///orgeast.dir.ad.dla.mil/...Packages/Assigned/ZCA_Watson/Tony%20Anderson/CL21075001/Tech/PID%20PACK--SPE7LX21RX059.txt[5/6/2021 5:14:22 PM] order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER ES371

The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN.

(End of TQ Requirement)

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS