PID-2540014601075.pdf

*** Product Number: 014601075 ** PID Text

COVER, FITTED, VEHICULAR BODY. TAN COLOR

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

A. Data required by this document will be included in the price of the procured item(s).

B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).

C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off

CL23101029- Market Research on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.

D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT ‐ Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained.

E. No Certificate of Conformance (COC) or alternate release is authorized.

End of Requirement

RT001: MEASURING AND TEST EQUIPMENT

ATTENTION BUYER, FIRST ARTICLE APPROVAL

AUTHORITY IS DELEGATED TO DCMA. INCLUDE

CLAUSE I09C08 (DELEGATION OF AUTHORITY

FOR FIRST ARTICLE APPROVAL) WITH THE AWARD.

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL‐STD‐1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL‐STD‐1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL‐STD‐105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON‐CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

RQ042: Non‐Tailored Higher‐Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non‐Manufacturers

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

CERTIFICATE OF CONFORMANCE REQUIRED

First Article Test to be performed IAW drawing no. 12420283

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12420283

REVISION NR H DTD 11/21/2013

PART PIECE NUMBER: 12420283‐015

IAW REFERENCE DRAWING NR 19207 12378482

REVISION NR F DTD 04/21/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420276

REVISION NR B DTD 04/04/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420277

REVISION NR K DTD 11/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 97403 13228E1633

REVISION NR K DTD 06/03/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421693

REVISION NR C DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420281

REVISION NR J DTD 11/21/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420283‐015

REVISION NR DTD 10/29/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 13228E1631

REVISION NR K DTD 03/06/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420023

REVISION NR J DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL‐COQC‐19071

REVISION NR DTD 03/12/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420283

REVISION NR DTD 03/24/1999

PART PIECE NUMBER: