P03 2025 Skidoo Summit Specifications.pdf
PDF 127 KB Posted
- Attached to
- 2025 Summit Edge 850 ETEC 165 x 3 w/shot
- Solicitation number
- 12FPC324Q0040
About this file
This document appears to be a technical specification for the 2025 Summit Edge 850 ETEC 165 x 3 snowmobile model. The specification lists detailed requirements for the engine, track, weight, and various accessories that must be included, such as a cargo rack, ski rack, and tunnel reinforcement.
The related federal contract opportunity is a solicitation issued by the Department of Agriculture Under Secretary for Farm Production and Conservation for the procurement of three of these snowmobile models. The solicitation number is 12FPC324Q0040, and it references the attached technical specification document for the detailed requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| S01 Combined Synopsis 12FPC324Q0040 2May24.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2025 Summit Edge 850 ETEC 165 x 3 w/shot Specifica�ons
Requirements (same for both machines):
- 850cc, liquid-cooled, two-stroke engine
- Minimum track length = 165 inches
- Minimum paddle length = 2.5 inches
- Track width = 16 inches
- Maximum dry weight = 475 lbs (before accessories & modifica�ons)
- Scratchers
- Removeable snowflap extension (if stock op�on doesn’t have a snowflap)
- Handlebar extension kit (if stock op�on isn’t height-adjustable)
- Fabric covers
- Pulling strap (1 for each machine)
- Addi�onal factory accessories (if available):
o Wide-op�on skid plate reinforcement o Knee pads o Starter = E-TEC SHOT o Fuel caddy (1 for each machine)
- Required a�er-market accessories, installed before delivery:
o Cargo rack: aluminum rack with adjustable bars, approximately 26 inches long.
(Mo Pros: Ajoosta GR large rack, or equivalent) o Ski rack: aluminum rack to carry one pair of skis on each machine.
(Mo Pros: Pack-It Bracket Mono, or equivalent) o Tunnel reinforcement: aluminum strips or bars running the full length of tunnel from rear bumper to front-end of foot runner boards to reinforce the ver�cal side walls of the tunnel. Capable of carrying up to 100lbs on top of the tunnel.
(Van Amburgent Enterprises: long bumper”, or equivalent)
File details come from the government source that posted it. Updated .