OVERHAUL DESCRIPTION.pdf

PDF 122 KB Posted

Attached to
AMPLIFIER-POWER SUPPLY
Solicitation number
70Z08523QRJ010B00
Issued by

View the file

Other files

File Type Posted
2123403B4200RJ010_REPAIR SPECS.doc.pdf PDF
2123403B4200RJ010_SOLE SOURCE JOTFOC.pdf PDF
70Z08523PRJ010B00 FAR CLAUSES.pdf PDF
70Z08523PRJ010B00 RFQ.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FOR OFFICIAL USE ONLY

OVERHAUL DESCRIPTION

ITEM NAME AMPLIFIER-POWER SUPPLY

STOCK NUMBER 5895-01-540-3771 SHELF LIFE CD 0

PART NUMBER 26000-2

USED ON USCG 418' WMSL EXCOM SYSTEM

Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.

OVERHAUL REQUIREMENTS:

NIIN: 01-540-3771

P/N: 26000-2

ITEM: AMPLIFIER, RADIO FREQUENCY

CAGE: 06GW1

OEM: MILPOWER

QTY PER HULL: 5

ESTIMATED REPAIR LEAD TIME: 3 MONTHS

SPECS:

DIMENSIONS: 20.5" D X 19" W X 5.250" H

WEIGHT: 114LBS

MOUNTING: RACK MOUNTED

POWER: 115 VAC

REPAIR REQUIREMENTS: REFER TO REPAIR SPECS DOCUMENT; A COPY WILL BE PROVIDED

TO THE OEM BY THE KS / KO

PACKAGING SPECS:

1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO

PART SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS

SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND

CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE

DURING SHIPPING.

1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH

3.7; 5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)

2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID

MARKING EX: PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE /

MATERIALS AS REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4,

PARAGRAPH 4.1 IDENTIFICATION MARKINGS; BARCODING IS NOT REQUIRED. (PG.21).

2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"

WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH

THE REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING. END

USE: USCG 418' WMSL EXCOM SYSTEM

TECH / KS / KO INFO:

FOB DESTINATION COST IS PRE-FACTORED INTO REPAIR COST BY THE OEM. A SEPARATE

LINE 0 ON THE PO FOR SHIPPING SHOULD NOT BE REQUIRED.

WARRANTY:

X A. Standard Manufacturer's Warranty

B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.

Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.

GOVERNMENT ACCEPTANCE:

Acceptance will be made at destination by a Government representative.

Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.

OVERHAUL DESCRIPTION

PRESERVATION / PACKAGING:

A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.

X B. See Attachments

PACKAGING AND MARKING FOR SHIPMENT:

A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:

NATIONAL STOCK NUMBER 5895-01-540-3771

ITEM NAME AMPLIFIER-POWER SUPPLY

PART NUMBER 26000-2

GOVERNMENT ORDER NUMBER

And the words: "Coast Guard SFLC Material, Condition "A"

X B. See Attachments

File details come from the government source that posted it. Updated .