Over Haul Description 12-399-3097.pdf
PDF 302 KB Posted
- Attached to
- CIRCUIT CARD ASSEMBLY / RADAR SET SUBASSEMBLY
- Solicitation number
- 70Z08522Q39020B00
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation.pdf | ||
| JOTFOC.pdf | ||
| Over Haul Description 12-330-4571.pdf | ||
| FAR Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FOR OFFICIAL USE ONLY
OVERHAUL DESCRIPTION
ITEM NAME CIRCUIT CARD ASSEMBLY
STOCK NUMBER
PART NUMBER
USED ON
5998-12-399-3097
54.2325.082.00
TRS-3D 75 RADAR
SHELF LIFE CD 0
Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.
OVERHAUL REQUIREMENTS:
NIIN: 12-399-3097
PN: 54.2325.082.00
CIRCUIT CARD ASSY
CAGE: D1901 / 7Y2U0
OEM: HENSOLDT
QTY PER HULL: 1
EST REPAIR LEAD TIME: 15 MONTHS
SPECS:
B/L: C, D
USED IN (A3) RECEIVER
FREQUENCY PROCESSOR 44FR3
REPAIR REQUIREMENTS: REFER TO REPAIR SPECS DOCUMENT - A COPY WILL BE PROVIDED
TO THE OEM BY THE KS / KO.
PACKAGING SPECS:
1.) MIL-STD-20731E - REFER TO METHOD 10. PACKAGING SHOULD BE APPROPRIATE TO
PART SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN VARIOUS
SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED, AND
CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE
DURING SHIPPING.
1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH
3.7; 5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E (**ONLY IF APPLICABLE TO PART**)
2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID
MARKING EX: PARAGRAPH 4.1 FIGURE 1 - MARKINGS SHALL COMPLY WITH PACK TYPE /
MATERIALS AS REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4,
PARAGRAPH 4.1 IDENTIFICATION MARKINGS; BARCODING IS NOT REQUIRED. (PG.21).
2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"
WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH
THE REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING. END
USE: TRS-3D 75 RADAR, CABIENT 3
TECH / KS / KO INFO:
FOB DESTINATION COST IS PRE-FACTORED INTO REPAIR COST BY THE OEM. ADDITIONAL
LINE 0 ON PO SHOULD NOT BE REQUIRED.
WARRANTY:
X A. Standard Manufacturer's Warranty
B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.
Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.
GOVERNMENT ACCEPTANCE:
Acceptance will be made at destination by a Government representative.
Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.
OVERHAUL DESCRIPTION
PRESERVATION / PACKAGING:
A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.
X B. See Attachments
PACKAGING AND MARKING FOR SHIPMENT:
A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:
NATIONAL STOCK NUMBER 5998-12-399-3097
ITEM NAME CIRCUIT CARD ASSEMB
PART NUMBER 54.2325.082.00
GOVERNMENT ORDER NUMBER
And the words: "Coast Guard SFLC Material, Condition "A"
X B. See Attachments
File details come from the government source that posted it. Updated .