Answers to Questions.pdf

Answers to Questions

1. In reviewing the SOW, we noticed several references to Table 1, which is not included in the solicitation documents. Can you provide a copy of the "Attachment A" with the Table 1 that is referenced in the SOW? Attachment A will be provided by Contracting Officer to vendor upon completion of a nondisclosure agreement.

2. Any way that we can get the drawings of the space where we will need to install the HVAC units? The HVAC is in an attic. Drawing provided by Contracting Officer to vendor upon completion of a nondisclosure agreement.

3. The SOW says two 20 T Splits but the CU Model H4CE180 currently installed is 15 T CU. Are we to provide a model with 15T CU (similar to existing) or are we quoting a more robust 20 T CU? 15 ton (similar to existing)

4. The SOW says an 8 T split, but the CU model 38AE014 currently installed is a 12.5 T CU. If you go with an 8 T system, it may be really undersized. Can you make sure this is what you want? 8 ton

5. Is the H4CE180 a dual circuit CU or a single circuit CU? Dual (Refer to SOW)

6. The 38AE014 is a single circuit CU. Is that what you want quoted? Refer to SOW Task 2

7. Are we to quote a new control system with a new head end? Refer to SOW Task 3

8. We are limited in space at your facility to replace refrigerant lines over offices and equipment because it has a drop ceiling and concealed in walls. Would a clean up kit and purging with nitrogen and good evacuation be sufficient? No