N6833523R0323.pdf

N6833523R0323

Section A - Solicitation/Contract Form

SUPPLEMENTARY INFORMATION

Procurement Point of Contact:

Shara Ruth Email: shara.j.ruth.civ@us.navy.mil Phone: 240-587-2525

AND

Mairen Flanagan Email: mairen.e.flanagan.civ@us.navy.mil Phone: 732-796-3606

This requirement is solicited as a 100% Total Small Business Set-Aside. This solicitation is for the competitive procurement of the Ethernet Accessory Set, P/N 4106AS0680-1, in support of the United States Navy (USN) and Royal Australian Air Force (RAAF) Aircraft.

It is anticipated that this solicitation will result in a single award, three (3) year, Fixed Price, Indefinite Delivery, Indefinite Quantity (IDIQ) contract.

Delivery Orders may be placed as follows:

Ordering Year 1 from date of contract award through 365 days after contract award.

Ordering Year 2 from 366 days after date of contract award through 730 days after date of contract award.

Ordering Year 3 from 731 days after date of contract award through 1,095 days after date of contract award.

The IDIQ guaranteed minimum quantities are as follows and will be placed on Delivery Order (DO) 0001 concurrent with award of the IDIQ contract. The Government will not be obligated to order any quantities beyond the guaranteed minimum over the life of the contract.

P/N Description IDIQ Guaranteed Minimum Quantity

4106AS0680-1 Ethernet Accessory Set 5

The minimum and maximum quantities are found in clauses BTXT.216-9506 MINIMUM AND MAXIMUM QUANTITIES (NAVAIR) (MAR 1999) and 52.216-19 ORDER LIMITATIONS (OCT 1995).

Registration in the System for Award Management (SAM) database shall be a prerequisite for award. For more information on the SAM database, refer to the SAM website at https://sam.gov/portal/public/SAM.

Proposal validity shall be for 90 days.

RELEASE OF TECHNICAL DATA PACKAGE: This program includes information that is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S.

persons to foreign persons as defined under the U.S. Department website: http://pmdtc.org/licenses.htm. Please note the following applicable clauses: DFARS 252.225-7048 - Export-Controlled Items (JUN 2013) and NAVAIR DTXT..227-9508 – Qualified U.S. Contractors for Export-Controlled Technical Data (APR 1998).

Accordingly, the drawing package associated with this solicitation will NOT be posted with this solicitation.

Offerors interested in receiving the necessary technical data for proposal preparation purposes must submit a written request, including a copy of a valid, current DD Form 2345 (Military Critical Technical Data Agreement) to Shara Ruth at shara.j.ruth.civ@us.navy.mil and Mairen Flanagan at mairen.e.flanagan.civ@us.navy.mil no later than 22 November 2023, 11:00 AM EDT. Late requests may not be considered, and the solicitation period may not be extended to accommodate late requests.

DD2 Forms 2345 will be reviewed and, if found valid and complete, download instructions will be sent electronically to the designated data custodian through the DoD SAFE web application at https://safe.apps.mil/.

Drawings shall be delivered the next working day after the closing date of drawing requests. Drawings will not be supplied to requestors who do not submit a Joint Certification Program verified DD Form 2345. For more information on Form DD2345, contact the Joint Certification Program by email at JCPADMIN@DLA.MIL or by phone at (877) 352-2255. The Joint Certification Program website and FAQs are available at https://www.dla.mil/Logistics-Operations/Services/JCP/.

Section B - Supplies or Services and Prices

IDIQ CONTRACTS

The maximum quantities identified herein for each CLIN represent the Government’s best estimate of the maximum quantities of anticipated order(s) during that specific period ordering period. The CLIN quantity maximums do not impose absolute quantity limits for each ordering period. The maximum quantities for each items of support equipment are not defined on an annual ordering period basis, but rather are defined by the sum of quantities across the three (3) year IDIQ contract.

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 5 Each Ethernet Accessory Set Year 1

FFP

Ethernet Accessory Set Year 1 USN IAW the Statement of Work and applicable Drawing Package FOB: Destination

NSN: 5995017073590

PSC CD: 5995

MAX

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Lot Data for CLIN 0001

FFP

Contract Data Requirements Lists (CDRL) IAW the Statement of Work and contract attachments.

FOB: Destination

UNIT UNIT PRICE MAX AMOUNT

1001 4 Each Ethernet Accessory Set Year 2

FFP

Ethernet Accessory Set Year 2 IAW the Statement of Work and applicable Drawing Package FOB: Destination

1002 1 Lot Data for CLIN 1001

FFP

Contract Data Requirements Lists (CDRL) IAW the Statement of Work and contract attachments.

UNIT UNIT PRICE MAX AMOUNT

2001 4 Each Ethernet Accessory Set Year 3

FFP

Ethernet Accessory Set Year 3 IAW the Statement of Work and applicable Drawing Package FOB: Destination

2002 1 Lot Data for CLIN 2001

FFP

Contract Data Requirements Lists (CDRL) IAW the Statement of Work and contract attachments.

FOB: Destination

CLAUSES INCORPORATED BY FULL TEXT

BTXT.216-9506 MINIMUM AND MAXIMUM QUANTITIES (NAVAIR)(MAR 1999)

As referred to in paragraph (b) of FAR 52.216-22 " Indefinite Quantity" of this contract, the contract minimum quantity is five (5); the maximum quantity is thirteen (13).

Section C - Descriptions and Specifications

STATEMENT OF WORK

Statement of Work for MQ-4C Ethernet Accessory Set

8 AUG 2023

1.0 SCOPE

This Statement of Work (SOW) is for the procurement of Ethernet Accessory Set for the MQ-4C Triton Unmanned Air Systems (UAS) Program in support of the United States Navy (USN) and Royal Australian Air Force (RAAF) Aircrafts.

This cable accessory set was designed to work in connection with the Cable IQ Tester, Part Number CIQ-100.

1.1 Applicable Documents:

a) MIL-STD-130N - Identification Marking of U.S. Military Property

b) Drawing #3909AS9999 Rev C- Identification Plate for Support Equipment/UID Markings

c) MIL-STD-2073-1E Standard Practice for Military Packaging

d) MIL-STD-129R - Military Marking for Shipment and Storage

e) MIL-STD-1366E - Transportability Criteria

f) Drawing 4106AS0680

2.0 REQUIREMENTS

2.1 General

The contractor shall provide materials and services as required to manufacture, assemble and deliver the Ethernet Accessory Set. They shall be manufactured in accordance with (IAW) this SOW, the Government furnished drawing packages, and the requirements of the contract.

The program is requesting a three (3) year Indefinite Delivery/Indefinite Quantity type contract.

Part Number (P/N) Description Min

Base Yr Est Qty.

Year 2

Est Qty.

Year 3

4106AS0680-1 Ethernet Accessory Set 5 4 4

Year 1 pricing valid from date of award through 365 days.

Year 2 pricing valid from 366 days through 730 days.

Year 3 pricing valid from 731 days through 1095 days.

2.2 Quality Assurance

The QA system shall be able to ensure that manufactured configuration items are built to print, functional, and reliably made in accordance with controlling technical drawings, specifications and standards. Each item manufactured as part of this contract shall have passed a Government final inspection prior to WAWF Receiving Report acceptance.

2.3 Certificate of Conformance

The Contractor shall provide a Certificate of Conformance (COC) with each shipment certifying that all hardware within the lot conforms to the government drawing package, this SOW, and the requirements of the contract. The COC shall be on company letterhead and signed by management. Each COC shall identify the part numbers and quantities delivered with each shipment. If any parts are found to be non-conforming, they shall be replaced at the Contractor’s expense.

2.4 Government Inspection and Acceptance

Government Inspection and Acceptance shall be accomplished at destination by designated representatives.

2.5 Item Unique Identification (IUID) Marking of US Military Property In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the Contractor is required to mark and register all end items and their components meeting the requirements called out in MIL-STD-130N. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.5.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID shall be or Construct #2.

2.5.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part. The UID (including 2D Matrix) should be incorporated onto the data plate in accordance with Drawing 3909AS9999 Rev C (Identification Plate/UID Markings). If the 2D matrix can't be incorporated onto the data plate, a 2D matrix sticker can be applied onto the main data plate provided it can be done without covering any critical data. When the 2D Data Matrix is placed directly onto the data plate, the Part Number, Serial Number and CAGE human readable characters are not required. If the above cannot be accomplished, a separate data plate can be attached which contains the 2D Matrix plus the human readable characters for the Part Number, Serial Number and CAGE. This added data plate should be attached in close proximity to the main data plate.

2.5.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-

STD-130N.

2.5.4 UID Registration

The prime Contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry. Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at <http://www.acq.osd.mil/dpap/UID/>.

2.5.5 Records

The Contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the Government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked and the registration method used.

3.0 REQUEST FOR VARIANCE - CDRL A001

When identified, the contractor shall submit to the government for approval recommendations for a Request for Variance (RFV). Any proposed design changes affecting form, fit, and/or function of the PSE (including enhancements) that deviate from drawings provided shall be identified prior to the fabrication process and will be reviewed by the cognizant UAS Support Equipment Lead Engineer for approval/disapproval. The contractor shall submit to the Government for approval a Request for Variance (RFV) to request deviations from the contractually specified design configuration. The contractor is advised to consult MIL-HDBK-61 Configuration Management for guidance when contemplating submitting a RFV. These change requests shall be prepared and submitted to the Government IAW Contract Data Requirements List (CDRL) A001.

4.0 PACKAGING, PRESERVATION AND SHIPPING

4.1 Packaging

Preserve, and pack for shipment in accordance with the MIL-STD-2073-1E, “Standard Practice for Military Packaging,” using the detailed Packaging Requirements Code specified below.

Packaging Requirements Code:

PN’s

MOP CL PM WM CM CT UC

4106AS0680-1 41 1 00 00 AD 0 ED

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standards for Phytosanitary Measures (ISPM) 15:2009, "Regulation of Wood Packaging Material in International Trade."

4.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc) shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label

(s) as additional means to protect the items during packaging, handling, storage, transit and removal from the pack.

4.3 Transportation

Transportability issues shall be identified and addressed to ensure all shipments can be transported with unrestricted movement via over-the-road transport. Transportability problem items shall be identified in accordance with MIL-STD-1366E criteria. Requirements for shipment of DOD materiel shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode of transportation in the Defense Transportation Regulation, DTR DOD 4500.9-R, Part II, Uniform Freight Classification Rules, National Motor Freight Classification Rules, and American Trucker’s Association Rules.

4.4 Shipping Document

The Contractor shall notify the Technical Point of Contract (TPOC), Kyle King, Phone (732) 323-7186, email address: kyle.t.king.civ@us.navy.mil when the shipment is ready and to confirm the shipping address. Upon shipment, a copy of the shipping document shall be emailed to kyle.t.king.civ@us.navy.mil, michael.a.moncayo.civ@us.navy.mil, and christopher.j.smallets.civ@us.navy.mil.

USN Shipment:

NAWCAD Lakehurst SE Staging Facility

NAWCAD Lakehurst, Rt. 547

HANGAR 1

Joint Base MDL, NJ 08733 Mark For: MQ-4C USN Program POC: Mike Moncayo, (732) 323-7843

*No Friday Deliveries

RAAF Shipment:

NAVSUP FLTLOGCEN Jacksonville Detachment, Gulfport, MS (RIC 4NN) 511 North Brown Ave, BLDG 437 Gulfport, MS 39501-5000 ATTN: RIC 4NN, DoDAAC N6694N POC: Penny Prestage, (985) 285-8228

**All Other Shipments:

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402

Mechanicsburg, PA 17050-0789

MARK FOR: 5Q4 (MQ-4C)

POC: Mike Moncayo, (732) 323-7843

** The contractor must instruct their carrier to request an appointment with DLA Mechanicsburg by filling out the attached “Prelodge Request Form” and emailing it to Prelodge@dla.mil and ddsp.prelodge@dla.mil.

Please note that an appointment is not needed for deliveries going to DLA that are being shipped via UPS, FEDEX, USPS etc. Therefore, the Prelodge form does not need to be completed for those type of shipments.

All exterior shipping containers/packaging shall at a minimum be marked with the following information: Part Number; Nomenclature; Quantity; Serial number(s); Contract Number; National Stock Number; and Manufacturer’s Name, Address, and CAGE Code.

Deliveries shall be made within four (4) months after order receipt. Early delivery is acceptable and encouraged.

CTXT.211-9510 CONTRACTOR EMPLOYEES (NAVAIR) (MAY 2011)

(a) In all situations where contractor personnel status is not obvious, all contractor personnel are required to identify themselves to avoid creating an impression to the public, agency officials, or Congress that such contractor personnel are Government officials. This can occur during meeting attendance, through written (letter or email) correspondence or verbal discussions (in person or telephonic), when making presentations, or in other situations where their contractor status is not obvious to third parties. This list is not exhaustive. Therefore, the contractor employee(s) shall:

(1) Not by word or deed give the impression or appearance of being a Government employee;

(2) Wear appropriate badges visible above the waist that identify them as contractor employees when in Government spaces, at a Government-sponsored event, or an event outside normal work spaces in support of the contract/order;

(3) Clearly identify themselves as contractor employees in telephone conversations and in all formal and informal written and electronic correspondence. Identification shall include the name of the company for whom they work;

(4) Identify themselves by name, their company name, if they are a subcontractor the name of the prime contractor their company is supporting, as well as the Government office they are supporting when participating in meetings, conferences, and other interactions in which all parties are not in daily contact with the individual contractor employee; and

(5) Be able to provide, when asked, the full number of the contract/order under which they are performing, and the name of the Contracting Officer’s Representative.

(b) If wearing a badge is a risk to safety and/or security, then an alternative means of identification maybe utilized if endorsed by the Contracting Officer’s Representative and approved by the Contracting Officer.

(c) The Contracting Officer will make final determination of compliance with regulations with regard to proper identification of contractor employees.

Section D - Packaging and Marking

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL- STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

DTXT.247-9508 PROHIBITION AND LIMITATIONS FOR PACKAGING MATERIALS

(NAVAIR) (AUG 2019)

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standards for Phytosanitary Measures (ISPM) 15:2009, "Regulation of Wood Packaging Material in International Trade."

DTXT.247-9514 TECHNICAL DATA PACKING INSTRUCTIONS (NAVAIR)(SEP 1999)

Technical Data and Information shall be packed and packaged for domestic shipment in accordance with best commercial practices. The package or envelope should be clearly marked with any special markings specified in this contract (or delivery/task order), e.g., Contract Number, CLIN, Device No., and document title must be on the outside of the package. Classified reports, data and documentation, if applicable, shall be prepared for shipment in accordance with Defense Industrial Manual for Safeguarding Classified Information, DoD 5220.22M.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

0002 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

1001 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

1002 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

2001 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

2002 Destination Government NAVAIR LAKEHURST

SUPPORT EQUIPMENT

STAGING FACILITY HWY 547

BU

, HANGAR 6 MARK FOR: MQ-4C

USN

LAKEHURST NJ 08733

Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984

ETXT.246-9512 INSPECTION AND ACCEPTANCE (NAVAIR)(OCT 2005)

(a) Inspection and acceptance of the supplies or services to be furnished hereunder shall be performed by an authorized Government representative.

(b) Acceptance of all Contract Line Items/Sub Line Items (CLINs/SLINs) shall be made by signature of the accepting authority on a DD 250 submitted through the WAWF system. Acceptance will only occur when the accepting authority is sure that inspections performed demonstrate compliance with contract requirements.

ETXT.246-9514 INSPECTION AND ACCEPTANCE OF TECHNICAL DATA AND INFORMATION

(NAVAIR)(FEB 1995)

Inspection and acceptance of technical data and information will be performed by the Procuring Contracting Officer (PCO) or his duly authorized representative. Inspection of technical data and information will be performed by ensuring successful completion of the requirements set forth in the DD Form 1423, Contract Data Requirements List (CDRL) and incorporation/resolution of Government review comments on the data items. Acceptance will be evidenced by execution of an unconditional DD Form 250, Material Inspection and Receiving Report, as appropriate, and/or upon receipt of a second endorsement acceptance by the PCO on the attachment to this contract entitled N/A. The attached form will not be used for high cost data such as drawings, specifications, and technical manuals.

Section F - Deliveries or Performance

ACCELERATED DELIVERY

Accelerated delivery to the greatest extent possible in advance of the specified delivery schedule is desired. Any accelerated delivery will be at no additional cost to the Government.

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 4 mths. ADC 5 NAVAIR LAKEHURST SE STAGING

FACILITY

MIKE MONCAYO

NAWCAD LAKEHURST, RT 547 HANGAR

MARK FOR: MQ-4C USN PROGRAM

JOINT BASE MDL NJ 08733

732-323-7843

N68335

0002 4 mths. ADC 1 (SAME AS PREVIOUS LOCATION)

N68335

1001 4 mths. AOE 4 DLA DISTRIBUTION SUSQUEHANNA PA

MIKE MONCAYO

MECHANICSBURG RECEIVING WEST

5450 CARLISLE PIKE BLDG 402

MARK FOR 5Q4 MQ4C UAV

MECHANICSBURG PA 17050-0789

732-323-7843

SW310N

1002 4 mths. AOE 1 (SAME AS PREVIOUS LOCATION)

2001 4 mths. AOE 4 (SAME AS PREVIOUS LOCATION)

2002 4 mths. AOE 1 (SAME AS PREVIOUS LOCATION)

52.242-15 Stop-Work Order AUG 1989 52.242-17 Government Delay Of Work APR 1984 52.246-15 Certificate of Conformance APR 1984 52.247-34 F.O.B. Destination NOV 1991

52.211-8 TIME OF DELIVERY (JUN 1997)

(a) The Government requires delivery to be made according to the following schedule:

REQUIRED DELIVERY SCHEDULE

CLIN EST. MAX

QUANTITY

DATE DELIVERY ADDRESS

0001 5 Each Units shall be delivered within 4 months after date of order

NAWCAD Lakehurst SE Staging Facility NAWCAD Lakehurst, Rt. 547

HANGAR 1

Joint Base MDL, NJ 08733 Mark For: MQ-4C USN Program POC: Mike Moncayo, (732) 323-7843

0002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

1001 4 Each Units shall be delivered within 4 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: 5Q4 (MQ-4C)

POC: Mike Moncayo, (732) 323-7843

1002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

2001 4 Each Units shall be delivered within 4 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: 5Q4 (MQ-4C)

POC: Mike Moncayo, (732) 323-7843

2002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or

(2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically.

(The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

FTXT.247-9505 TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)

Technical Data and Information shall be delivered in accordance with the requirements of the Contract Data Requirements List, DD Form 1423, Exhibit A, attached hereto, and the following:

(a) The contractor shall concurrently deliver technical data and information per DD Form 1423, Blocks 12 and 13 (date of first/subsequent submission) to all activities listed in Block 14 of the DD Form 1423 (distribution and addresses) for each item. Complete addresses for the abbreviations in Block 14 are shown in paragraph (g) below.

Additionally, the technical data shall be delivered to the following cognizant codes, who are listed in Block 6 of the DD Form 1423.

(1) PCO, Code N/A

(2) ACO, Code N/A

(b) Partial delivery of data is not acceptable unless specifically authorized on the DD Form 1423, or unless approved in writing by the PCO.

(c) The Government review period provided on the DD Form 1423 for each item commences upon receipt of all required data by the technical activity designated in Block 6.

(d) A copy of all other correspondence addressed to the Contracting Officer relating to data item requirements (i.e., status of delivery) shall also be provided to the codes reflected above and the technical activity responsible for the data item per Block 6, if not one of the activities listed above.

(e) The PCO reserves the right to issue unilateral modifications to change the destination codes and addresses for all technical data and information at no additional cost to the Government.

(f) Unless otherwise specified in writing, rejected data items shall be resubmitted within thirty (30) days after receipt of notice of rejection.

(g) DD Form 1423, Block 14 Mailing Addresses: See Exhibit A.

Section G - Contract Administration Data

252.204-7006 Billing Instructions--Cost Vouchers MAY 2023 252.204-7022 Expediting Contract Closeout MAY 2021 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

________COMBO____________________________________________________

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC TBD

Admin DoDAAC** TBD

Inspect By DoDAAC TBD

Ship To Code TBD

Ship From Code TBD

Mark For Code TBD

Service Approver (DoDAAC) TBD

Service Acceptor (DoDAAC) TBD

Accept at Other DoDAAC TBD

LPO DoDAAC TBD

DCAA Auditor DoDAAC TBD

Other DoDAAC(s) TBD

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”)

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

GTXT.232-0001 PAYMENT INSTRUCTIONS (NAVAIR) (MAY 2023)

For Government Use Only

Contract/Order Payment Clause

Type of Payment Request

Su pp ly

Se rv ic e

C on st ru ct io n

Payment Office Allocation Method

52.212-4 (Alt I), Cost Voucher X X N/A Line item specific proration.

Contract Terms and If there is more than one ACRN Conditions— within a deliverable contract line Commercial Products item, the funds will be allocated in and Commercial the same proportion as the Services; amount of funding currently 52.216-7, Allowable unliquidated for each ACRN on Cost and Payment; the line item billed.

52.232-7, Payments Under Time-and- Materials and Labor- Hour Contracts

52.232-1, Payments, Navy X X N/A Line item specific by fiscal year.

252.217-7007, Shipbuilding If there is more than one ACRN Payments Invoice (Fixed within a deliverable line or (vessel repair and alterations) Price) deliverable subline item, the funds will be allocated using the oldest funds first. In the event of a deliverable line or deliverable subline item with two or more ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-1, Payments; Invoice X X N/A Line item specific proration.

52.232-2, Payments If there is more than one ACRN Under Fixed-Price within a deliverable line item or Research and deliverable subline item, the Development funds will be allocated in the Contracts; same proportion as the amount 52.232-3, Payments of funding currently unliquidated Under Personal for each ACRN on the deliverable Services Contracts; line or deliverable subline item for 52.232-4, Payments which payment is requested.

Under Transportation Contracts and Transportation-Related Services Contracts; and 52.232-6, Payments Under Communication Service Contracts With Common Carriers st ru ct

52.232-5, Payments Under Fixed-Price Construction Contracts

Construction Payment Invoice

N/A N/A X Line item specific by fiscal year. If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated using the oldest funds first. In the event of a deliverable line or deliverable subline item with two or more ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-16, Progress Progress X X N/A Contract-wide proration.

Payments Payment* Funds shall be allocated in the (excluding contracts same proportion as the amount with multiple lot of funding currently unliquidated progress payments) for each ACRN. Progress payments are considered contract level financing, and the “contract price” shall reflect the fixed-price portion of the contract per FAR 32.501-3.

52.232-16, Progress Payments;

252.232-7018, Progress Payments— Multiple Lots

Progress Payment*

X X N/A Lot-wide proration (applies to lots specifically identified in the contract).

If there is more than one ACRN within a lot, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN on the lot for which payment is requested.

See PGI 204.7108 paragraph (c) for multiple lot CLIN structure.

st ru ct

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services;

52.232-30, Installment Payments for Commercial Products and Commercial Services

Commercial Product and Commercial Service Financing*

X X N/A Specified in approved payment. The contracting officer shall specify the amount to be paid and the account(s) to be charged for each payment approval in accordance with FAR 32.207(b)(2).

52.232-32, Performance-Based Payments

Performance- Based Payments*

X X N/A Specified in approved payment. The contracting officer shall specify the amount to be paid and the account(s) to be…