TRANSIT CASES_Specifications.doc

SpecificationS/SOW

· Description

The Naval Air Warfare Center Aircraft Division (NAWCAD), Special Communication Requirements Division (SCRD), Webster Field Annex is procuring transit cases as required by the Joint Base Station (JBS) Program. The JBS program has tasked the SCRD to integrate commercial Off The Shelf (COTS) transit cases for the JBS system.

The required 5U transit case needs to meet the following specifications:

1. IEEE-Standard Frame type with T-Nut rail, 19” Wide, 24” Deep (outside to outside of frame, 32” with lids), and .250” holes with EIA 310 spacing and clip nuts

2. Shock Mounting to support internal load of 300 lbs

3. Color-Flat Tactical Black-FS 37030

4. Case Hardware

· Material-Stainless Steel

· Color-Black Anodized

· Handles-Spring Loaded Recessed two per side for smaller cases

· Latches-Lockable Quarter Turn Butterfly Latches

· Removable Wheels-Caster Type, Locking Swivel

5.

Stacking-Male/Female interlocking

6.

Lids-Removable 3” depth with Removable Zipped Canvas Bag 7.

Lid Hangers to store lids while case is open and operational

8.

Automatic Pressure Release Valve for flight/high altitude transport

9.

Water resistant

10.

Case size 5U with internal mounting height of minimum 8.75 inches to a maximum of

12.25 inches tall.

The required 6U transit case needs to meet the following specifications:

1. IEEE-Standard Frame type with T-Nut rail, 19” Wide, 24” Deep (outside to outside of frame, 32” with lids), and .250” holes with EIA 310 spacing and clip nuts

2. Shock Mounting to support internal load of 300 lbs

3. Color-Flat Tactical Black-FS 37030

4. Case Hardware

· Material-Stainless Steel

· Color-Black Anodized

· Handles-Spring Loaded Recessed two per side for smaller cases

· Latches-Lockable Quarter Turn Butterfly Latches

· Removable Wheels-Caster Type, Locking Swivel

5.

Stacking-Male/Female interlocking

6.

Lids-Removable 3” depth with Removable Zipped Canvas Bag

7.

Lid Hangers to store lids while case is open and operational

8.

Automatic Pressure Release Valve for flight/high altitude transport

9.

Water resistant

10.

Case size 6U with internal mounting height of minimum 10.50 inches to a maximum of 14 inches tall.

The required 10U transit case needs to meet the following specifications:

1. IEEE-Standard Frame type with T-Nut rail, 19” Wide, 24” Deep (outside to outside of frame, 32” with lids), and .250” holes with EIA 310 spacing and clip nuts

2. Shock Mounting to support internal load of 300 lbs

3. Color-Flat Tactical Black-FS 37030

4. Case Hardware

· Material-Stainless Steel

· Color-Black Anodized

· Handles-Spring Loaded Recessed four per side

· Latches-Lockable Quarter Turn Butterfly Latches

· Removable Wheels-Caster Type, Locking Swivel

5.

Stacking-Male/Female interlocking

6.

Lids-Removable 3” depth with Removable Zipped Canvas Bag

7.

Lid Hangers to store lids while case is open and operational

8.

Automatic Pressure Release Valve for flight/high altitude transport

9.

Water resistant

10.

Case size 10U with internal mounting height of minimum 17.50 inches to a maximum of

21.50 inches tall.

Enclosure (2)