N6660418Q0039_Attachment___1__Government_Min_Requirements.pdf
PDF 141 KB Posted
- Attached to
- Chip Scale Atomic Clock
- Solicitation number
- N66604-18-Q-0039
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE SPECIFICATION FOR ASTEP GPS INTERNAL ATOMIC CLOCK PCB
REQUIREMENTS:
GPS ATOMIC CLOCK PCB SHALL COMPLY WITH ALL PERFORMANCE STANDARDS CITED
HEREIN AND RESULTS VERIFIED WITH APPLICABLE TESTING DOCUMENTATION
NOMINAL INPUT
INPUT VOLTAGE: 8 VDC to 20 VDC GPS ANTENNA: 5V, L1 C/A 1574MHz, passive or active
NOMINAL OUTPUTS
1PPS 5V CMOS
10 MHz CLOCK OUTPUT, MINIMUM OF 3
COMMUNICATION INTERFACE
RS-232 SCPI99-Control at 9.6K, 19.2K, 38.4K, 57.6K, 115.2K
GPS RECEIVER
50 channel, mobile SBAS: WAAS, EGNOS, MSAS supported
G-SENSITIVITY
<= 0.2ppb per-g per axis
MAGNETIC SENSITIVITY
<= 9.0E-11/Guauss, +/- 2.0 Gauss
HOLDOVER
<= ±2 µSec /24hrs w/ 1 hour GPS lock at +25C
ALLEN DEVIATION AFTER 20 MIN GPS LOCK
1s: <1E-10 10s: <2.5E-11
100s: <2E-11
WARM UP STABILZATION TIME
<= 120 secs at 25C to <5E-10s accuracy
FREQUENCY ACCURACY with GPS LOCK AFTER 3MIN <= +/-2E-10s
TOTAL POWER CONSUMPTION
<= 1.4W at +25C
OPERATING RANGE
0C to +70C
STORAGE RANGE
-30C to +85C
LONGEVITY
MTBF > 100,000hrs
N66604-18-Q-0039 - ATTACHMENT 1 - Government Minimum Requirements
BOARD SIZE
<= 2.52”x3”x0.7”
BOARD WEIGHT
<= 100g
SHOCK & VIBRATION
No loss of atomic lock with Mil-STD-810G, method 514.6, Procedure I, Category 23, General Minimum Integrity, 7.7-grms
No loss of atomic lock with vibration level 7.7grms for 30 min in 3 axis of direction
Mil-STD-202G, Method 213, Condition E: Survive (non-operating clock only) 100g, 0.5msec half-sine shock pulse
1PPS ACCURACY
±15ns to UTC RMS (1-sigma), GPS locked
OSCILLATOR AGING
Less than 0.3ppb per month in holdover without GPS
FREQUENCY STABILITY
Better than ±0.5E-09 (CSAC only, no GPS disciplining, 0°C to +75°C
File details come from the government source that posted it.