SOW_N66604-15-Q-1872_(Forklift_Lease).pdf

Forklift Lease

NUWC NPT Bangor On-Site Office, Naval Base Kitsap, Submarine Base Bangor

STATEMENT OF WORK

1.0 BACKGROUND

Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT), Code 40 has a requirement to lease a 35,000 pound capacity forklift with 96-inch pallet forks in order to provide lift capabilities for test equipment located at NUWCDIVNPT Bangor On site Office, Naval Base Kitsap, Submarine Base Bangor, 2012 Guardfish Street, Silverdale, WA. This size machine is required due to the size and weight of the test equipment being handled. The equipment for which the forklift will be used to handle is loaded onto and off of various vehicles for transport. The forklift is also used to move and position test equipment in support of a dedicated Navy platforms. Current contract N66604-12-P-2377 expires on 31 July 2015.

2.0 SCOPE

The contractor shall provide NUWCDIVNPT, Code 40 a forklift at eh Bangor On Site Office for a period of one year, with two additional one-year option periods.

The type of funds applicable to this contract are Research, Development, Test & Evaluation

(RDT&E).

3.0 APPLICABLE DOCUMENTS

3.1 Management of Materials Handling Equipment (MHE) and Shipboard Mobile Support

Equipment (SMSE), NAVSUP P-538 v6

3.2 NAVICP PD-41206 "MHE Shorebase Forklifts - Required Safety Markings"

4.0 REQUIREMENTS

4.1 General Requirements

In accordance with Applicable Documents 3.1 and 3.2, the contractor shall provide a forklift that contains all required safety equipment and special markings. The provided forklift shall have no more than 500 hours of use and meet each of the minimum specifications listed below:

MINIMUM SPECIFICATIONS (BRAND NAME OR EQUAL)

Make/Model: Hyundai/160D-7E (or equivalent)

Capacity: 35,000 lbs at 24” Load Center

Mast: 2 Stage WideView Mast

Maximum Fork Height: at least 197.0”

Collapsed Height: at most 170.0”

Carriage: 97.8”

Attachment: Side Shift and Fork Positioner

Forks: 96” Pallet Style

Transmission: Automatic

Tires: Pneumatic

Drive: 12.00-20-20 X4

Steer: 12.00-20-20 X2

Turning Radius: at least 180”

Travel Speed Empty: at least 20 mph

Forklift Weight Empty: at least 43,880 lbs

Other Requirements

2 Stage WideView Mast 5 lb Fire extinguisher

5 Hydraulic Valves / Seat Side Levers Amber Strobe

97.8” Sideshift and fork positioning carriage

Air Horn

3.7” X 7.9” X 96.0” Pallet Forks Fully Enclosed Cab including:

Cab heater / defroster with circulation fan

Two speed front wiper and washer

Automatic hydraulic activation for tilting operator compartment

Single speed top and rear wipers

Radiator coolant level warning Rear view mirror

Elevated air intake All glass is laminated, shatterproof and tinted

Two (2) additional front working lights Doors equipped with sliding windows

Two (2) additional rear mounted lights Key locks and latch to keep open

4.2 Servicing

The contractor shall have a service technician available within a one (1) hour drive of

NUWCDIVNPT Bangor On site Office, Naval Base Kitsap, Submarine Base Bangor, 2012

Guardfish Street, Silverdale, WA.

During the lease period, the contractor shall conduct all maintenance and service requirements in accordance with the original equipment manufacturer’s (OEM’s) guidance. Servicing and maintenance shall take place on-site at NUWCDIVNPT Bangor.

In accordance with Applicable Document 3.1, the contractor shall provide Material Safety Data

Sheet (MSDS) Sheets for all material brought on board NUWCDIVNPT Bangor prior to the start of forklift maintenance.